VIEW® Pro D310 High-definition, IP, Compressed Audio/Video Decoder Quick-Start Guide
Table of Contents THE VIEW PRO ENCODER AND DECODER ................................ 1 QUICK-START OVERVIEW ............................................................ 1 ENCODER AND DECODERS IN A NETWORK ............................. 2 PARTS INCLUDED ......................................................................... 3 MOUNTING THE D310 DECODER ................................................ 4 CONNECTING THE DECODER ..................................................... 6 CONFIGURING THE DECODER......
VIEW PRO D310 QUICK-START GUIDE THE VIEW PRO ENCODER AND DECODER ClearOne’s VIEW Pro D310 decoder delivers the ultimate in high-quality, low-latency, 4:2:0 YCbCr color space digital media at unrivaled cost advantage. Distribution of all digital media is via existing IP networks and infrastructure to single-image, full-screen video applications.
VIEW PRO ENCODER & DECODER ENCODER AND DECODERS IN A NETWORK The VIEW Pro encoder receives input from an AV source device such as BluRay Player, DVD Player, etc. and distributes it over a StreamNet TCP/ IP network using a standard 100 Mbit or Gbit Ethernet connection. The encoder provides the IP data for VIEW Pro decoders to deliver to the displays, therefore decoders are installed at the locations of the target video displays. This picture shows an example for connecting VIEW Pro devices in a network.
VIEW PRO D310 QUICK-START GUIDE PARTS INCLUDED The following items are included with the VIEW Pro D310 Decoder: • D310 Decoder Unit • Power Supply • Mounting Plate (VESA, holes spaced 100 mm X 100 mm, 3.9 inches X 3.9 inches) • Mounting Screws for Mounting Plate and D310 Unit • USB to DB9 Serial Adapter Verify that all items have been received. If there is any issue, please contact your ClearOne representative.
VIEW PRO ENCODER & DECODER MOUNTING THE D310 DECODER The D310 includes a Mounting Plate and screws. The Mounting Plate can be used on a wall or for applications where a decoder must be located on a VESA mount, such as on the back of a monitor. Attach the Mounting Plate to a display with the 4 phillips-head screws. (Figure 1) Figure 1 NOTE: Although the Mounting Plate does attach the decoder to the back of a display, it also allows the decoder to be attached to a separate VESA mount.
VIEW PRO D310 QUICK-START GUIDE Figure 2 Align the D310 with the Mounting Plate so that indicator arrows on the plate and the decoder are pointed upward. Insert the heads of the extended screws on the D310 into the keyhole slots of the Mounting Plate and slide down to secure.
VIEW PRO ENCODER & DECODER CONNECTING THE DECODER Connect the D310 Decoder to: • Ethernet LAN where the encoders and the computer running the VIEW CONSOLE program are connected • HDMI Audio/Video output to the HDMI input on the display or projector • USB 3.0 ports can be used by the USB to DB9 Serial Adapter allowing serial communication to/from the unit • A provided DC power supply NOTE: Carefully run the connected cables so they do not put strain on the connectors. Ethernet Connection to Network USB 3.
VIEW PRO D310 QUICK-START GUIDE CONFIGURING THE DECODER The VIEW Pro D310 Decoder is configured for use in the network with the VIEW CONSOLE program. VIEW CONSOLE is a PC-based program that allows you to configure devices so that they can communicate across a StreamNet network. Phases of the software setup include: • Create a new or open an existing project • Add the D310 device to the project • Match the correct device from the right-hand column.
VIEW PRO ENCODER & DECODER Create a New or Open an Existing Project Add the VIEW Pro D310 to the Project 8
VIEW PRO D310 QUICK-START GUIDE Match the Correct Device from the Right-Hand Column 9
VIEW PRO ENCODER & DECODER Configuring: Info Tab for D310 10
VIEW PRO D310 QUICK-START GUIDE Configuring: Info Tab Advanced Options for D310 11
VIEW PRO ENCODER & DECODER Configuring: Display Outputs Tab for D310 12
VIEW PRO D310 QUICK-START GUIDE Configuring: Display Controls Tab for D310 13
VIEW PRO ENCODER & DECODER Saving the Project Select File>Save to save the project. Sending the Configurations With the project still open to the changes you just made, select the Send Configuration to Device icon or, in the case of multiple devices, the Send Configuration to Multiple Devices icon. This will send the configuration setting to the device(s). Wait for the device(s) to restart. These steps in these processes are detailed in the VIEW CONSOLE manual available for viewing or download at www.
15
16
VIEW PRO D310 QUICK-START GUIDE PART NUMBERS 910-0003-002 910-0003-001 910-0001-001 910-0000-001 910-0000-006 VIEW Pro Decoder D310 VIEW Pro Decoder D210 VIEW Pro Decoder D110 VIEW Pro Encoder E120 VIEW Pro Encoder E110 CONTACT INFORMATION HEADQUARTERS: Salt Lake City, UT USA 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Sales: 800.705.2103 Toll Free: 800.945.7730 Fax: 801.303.5711 e-mail: sales@clearone.com TechSales Tel: 800.705.2103 e-mail: techsales@clearone.com Technical Support Tel: 800.
