ClearClick® Retro Wooden Radio with BT (Model VR47) Quick Start Guide & User’s Manual 5-Year Warranty + FREE USA-Based Tech Support If you have any issue or question regarding this product, contacting us directly is the fastest way to resolve the issue. We are ClearClick®, a small USA-based business, and we stand behind our products with a 5-year warranty & free USA tech support. If you have any issues with our product, please contact us at support@clearclick.tech. 1 www.ClearClick.
Extend Your Warranty for FREE! Extend your warranty by one year for free simply by registering your product at: www.ClearClick.tech Safety Precautions 1. Do not disassemble the unit. 2. Do not operate the unit around water or rain. Do not operate the unit around any kind of machines or appliances (other than computers). 3. Turn off and unplug the unit when not in use. 4. Do not allow young children to use this device.
QUICK START – Setting Up The Device 1. Securely plug the power plug into a power outlet. Important Note For Users Outside USA, Canada, and Mexico: This device is ONLY compatible with standard North American 110V-120V voltage. Do NOT use with voltages over 110V-120V, as this will permanently damage the device instantly! 2. Turn on the radio with the power switch on the right side. 3. The device will start up in either “radio” or “Bluetooth” mode, whichever it was set on during last use.
5. Use the tuning knob to select your desired radio station. 6. Use the volume control knob to adjust the volume. Note: To improve the reception of FM radio, simply adjust the pigtail antenna in the back of the radio. To improve the reception of AM radio, simply adjust the position of the entire radio. QUICK START – Playing Music via Bluetooth 1. If you previously had an aux-in/line-in cable connected, make sure it is disconnected to use Bluetooth. 2.
QUICK START – Playing Music via Line-In/Aux-In 1. Using the included 3.5mm-to-3.5mm aux cable, connect your phone, tablet, or MP3 player to the radio’s “AUX-IN” jack in the back of the device. 2. Start playing music on your phone, tablet, or MP3 player. 3. Use the volume control knob on the radio to adjust the volume. (Note: You may also need to adjust the volume on your phone or tablet.) 4. NOTE: You must unplug the aux-in cable when you want to use the radio’s USB, AM/FM, or Bluetooth functions again.
. To stop playback, press USB ON/OFF button. 7. NOTE: Make sure the radio’s USB on/off button is turned off to use the radio’s AM/FM or Bluetooth functions again.
Radio Diagram & Features 1. 2. 3. 4. 5. 6. 7. Volume Knob FM Tuning Display AM Tuning Display AM Function Button FM Function Button RADIO/BT Button (Press to switch back and forth between Radio & Bluetooth modes) Tuning Knob 8.
9. 10. 11. 12. 13. 14. 15. 16. 17. 18. USB ON/OFF Button (Must be turned off to use Radio/Bluetooth) USB Backward Skip Button USB Play/Pause Button USB Forward Skip Button USB Indicator Light USB Port FM Wire Antenna AC Power Cord (110V-120V North American voltage ONLY!) 3.
Troubleshooting 1. There’s a flashing white light, and the radio won’t switch to “AM” or “FM" radio mode. To listen to “AM” or “FM” radio, you need to switch to “Radio” mode first. Press the “RADIO/BT” button until either the “AM” or “FM” light is illuminated. 2. My radio was working, but now won’t play anything, radio or Bluetooth. Make sure you have disconnected any aux-in cables from the “aux-in” jack in the back of the radio. Make sure the USB function (in the rear of the radio) is turned off. 3.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
www.ClearClick.
