User’s Manual & Quick Start Guide 1-Year Warranty & USA-Based Tech Support Email Us At: support@clearclick.tech www.ClearClick.tech Extend Your Warranty To 2 Years For FREE! Get a FREE extra year of warranty just by registering your product at: www.ClearClick.
Browse All Our Products! If you’re looking for fun, unique, and easy-to-use technology, we’ve got it! Please visit our website to browse all of our products: www.ClearClick.tech Safety Precautions 1. Do not disassemble the unit. 2. Please note that the device and/or plugged in USB drives may become very warm during use. 3. Do not operate the unit around water or rain. Do not operate the unit around any kind of machines or appliances (other than computers). 4. Turn off and unplug the unit when not in use.
What’s In The Box? a. HD Video Capture Box Ultimate (4K Edition) b. HDMI Cable c. AV Adapter d. Power Adapter e. Power/USB Cable f. Remote Control g.
1. LED Indicator: A red light appears when the device is either turned on or charging. A red light blinks when the device is recording. 2. Power Button: Hold down to turn the device on or off. To turn off/on the device’s LCD only, press the button with a single press. 3. Headphone/Microphone Jack: Input for microphone/headset or output for headphones 4. AV IN: Input jack for RCA input (from VCR, camcorder, etc.) 5. HDMI IN: HDMI input port. 6. HDMI OUT: HDMI output port. 7.
Remote Control Diagram & Explanation 5
Many HDMI video sources are encrypted with content protection called “HDCP,” even if the content is not copyrighted. Complying with laws, the HD Capture Box Ultimate does not disable or override content protection. ** Therefore, if you simply plug in a content-protected HDMI video source to the HD Capture Box Ultimate, it will not detect a signal or allow you to record/stream. This does NOT mean the device is defective.
Quick Start Guide – Normal Recording Mode 1. IMPORTANT: Read the note on page #6 before continuing! 2. Connect the power adapter to the “USB Power / PC” port of the HD Video Capture Box Ultimate. Plug in the power adapter to any power outlet. 3. Turn on the HD Video Capture Box by holding down the power button for several seconds. (The power button is located on the top of the device, on the right side.) 4. Using the included HDMI cable, connect your video source to the HD Video Capture Box Ultimate.
7. Press the “Record” button on the HD Video Capture Box. 8. To stop recording, press the “Record” button again. (Or to pause recording, press the “OK” button. To resume recording, press the “OK” button again.) 9. To play back recordings on your device, press the “Mode” button TWICE to go to “Playback” mode. You can press ▲▼ to adjust the volume. 10.
Quick Start Guide – Live Streaming or Recording with OBS (PC Only) 1. IMPORTANT: Read the note on page #6 before continuing! 2. Connect the included micro USB cable to the “USB Power / PC” port on the HD Video Capture Box. Plug the other end into your PC. (Macintosh not supported.) 3. Turn on your device and open the Menu on your device. Scroll down to “USB Mode” and press “OK.” Select “PC Streaming Mode” and press “OK.” Press “Menu” to exit the menu. 4. Download & install the OBS software from www.
Device Specifications Supported Video Resolutions Input 4096x2160 (30P) 3840x2160 (30P) 1920x1080 (60p) 1920x1080 (50p) 1920x1080 (30p) 1920x1080 (25p) 1920x1080 (24p) 1280x720 (60p) 1280x720 (50p) 720x480 (60p) 720x576 (50p) HDMI Output 1920x1080 (60p) USB Flash Drive/MicroSD Card Recording: 3840x2160 (30P). 1920x1080 (60p). 1280x720 (60p). 720x480 (60p). Recording PC Recording: 3840x2160 (30P).1920x1080 (60p). 1280x720 (60p). Output format MP4 (H.264/H.
Troubleshooting (FAQ’s) 1. My video doesn’t show up on the LCD / the LCD is black. First, see the important notice on page #6 (HDMI sources only). Please make sure the HDMI or AV source input is connected properly. Make sure the “Video Source” setting in the device menu is set correctly. Make sure your HDMI cable is plugged into the “IN” port (the third port from the left), not the “OUT” port. 2. I made a recording, and when I plug in my USB/MicroSD drive to my computer, the file is corrupted or missing.
Here’s how to format your USB/SD card on your Mac… 1. 2. 3. 4. 5. In Finder, navigate to Applications -> Utilities -> Disk Utility. On the left, click on your USB/SD drive. Click the “Erase” button. Next to “Format,” select MS-DOS FAT32. Click “Format/Erase.” Remove the USB/SD card and insert it into your HD Video Capture Box. 6. The device isn’t recording. First, see the important notice on page #6 (HDMI sources only). Please make sure the proper source input is selected.
as devices in your PC’s “Device Manager”. Make sure these devices are selected as Video/Audio input in your OBS streaming software. 10. The device isn’t working with an external USB hard drive. Since USB hard drives will consume more power than USB flash drives, the embedded battery of the HD Video Capture Box may not provide enough power. Thus, please connect the HD Video Capture Box to the power adapter before connecting the USB hard drive.
www.ClearClick.