CLEANMAX OPERATING INSTRUCTIONS FOR C LEAN M AX PRO SERIES UPRIGHT VACUUMS MODELS : CMPS-1T CMPS-1N CMPS-QD CMPS-QDZ Before operating the vacuum, please read these instructions completely.
Index Important Safety Instructions ��������������������������������������������������������������������������������������������������������������������������������� 2 Grounding Instructions ����������������������������������������������������������������������������������������������������������������������������������������� 3 Parts Identification ������������������������������������������������������������������������������������������������������������������������������������������ 4 - 5 Replacement Bag
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety. When using an electrical appliance, basic precautions should always be followed, including the following: SAVE THESE INSTRUCTIONS.
Grounding Instructions This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Parts Identification Models CMPS-QDZ and CMPS-QD Hose hanger Cord retainer Hose handle Cord lock Handle tube Cord storage hook Power cord On/Off switch Bag compartment cover latch Quick Draw wand Easy-carry handle Accessory attachment opening Bag compartment Tools Cord storage hook Quick clean-out port Brushroll jam indicator Nozzle hose (CMPS-QDZ only) Furniture guard Self-adjusting nozzle Thermal reset button Thermal reset instructions Replacement Bags and Filters • Genuine CleanMax Vacuu
Parts Identification Models CMPS-1T and CMPS-1N Cord retainer Cord storage hook Handle tube Power cord Cord lock On/Off switch Bag compartment cover latch Easy-carry handle Bag compartment Accessory attachment opening Tools (CMPS-1T only) Nozzle hose Furniture guard Self-adjusting nozzle Thermal reset button Thermal reset instructions Replacement Bags and Filters • Genuine CleanMax Vacuum Bags Part # CMP-12 12 per package (Paper) Includes 1 Secondary Filter Part # CMH-6 6 per package (H
How to Assemble and Operate the Vacuum How to Attach the Handle to the Vacuum Cleaner (models CMPS-1T and CMPS-1N) The vacuum cleaner and the handle are packed separately. 1. Remove the handle screw, insert handle into the hole on top of the vacuum cleaner. Make sure that the cord hook on the handle is positioned to the back of the vacuum cleaner (Fig. 1). 2. Line up the small hole on the handle with the small hole on the vacuum cleaner and insert the screw. Make sure the screw is tightened securely.
How to Assemble and Operate the Vacuum How to Attach the Handle to the Vacuum Cleaner (models CMPS-QDZ and CMPS-QD) The vacuum cleaner and the handle are packed separately. 1. Remove the handle screw, insert handle into the hole on top of the vacuum cleaner (Fig. 1). 2. Line up the small hole on the handle with the small hole on the vacuum cleaner and insert the screw. Make sure the screw is tightened securely. How to Attach the Extension Power Cord to the Cord Lock 1.
How to Change the Vacuum Bag Always operate the vacuum cleaner with a vacuum bag installed. Bags should be changed when 2/3 full. How to Change the Vacuum Bag 1. Unplug the vacuum cleaner. Remove the bag compartment cover and remove the used bag from the bag holder (Fig. 1). 2. A ttach the new vacuum bag onto the bag holder (Fig. 2). 3. P ull the bottom corners of the new vacuum bag (Fig. 3). 4.
Handle Adjustments The handle on this vacuum cleaner can be set to one of two positions – upright or reclined. How to Adjust the Handle 1. To release the handle, step on the left rear corner of the vacuum cleaner (Fig. 1). 2. U pright position – for when cleaning tools are being used or for storage (Fig 2). Handle locks in this position. 3. R eclined position – for normal cleaning (Fig. 3) and recline handle further for cleaning under furniture (Fig. 4). Fig. 1 Fig. 3 Fig. 2 Fig.
Automatic Self-Adjusting Nozzle Your CleanMax upright vacuum cleaner is designed with an Automatic Self-Adjusting Nozzle. No manual adjustments are required. The height of the nozzle is instantly and automatically adjusted to carpet pile height. This self-adjusting feature allows the nozzle to float evenly over all carpet pile surfaces. Optional Cleaning Tools/Accessories 7-Piece Deluxe Attachment Kit 05.119 (Fig.
On-Board Tool Cleaning Model: CMPS-1T These vacuums are equipped with on-board cleaning tools including a metal telescopic wand, stretch hose, dusting brush and a crevice tool. 1. R emove the extension wand from the body of the vacuum cleaner and attach it to the nozzle hose. 2. Insert any of the tools onto the end of the wand. Models: CMPS-QD and CMPS-QDZ These vacuums are equipped with on-board cleaning tools including a metal telescopic wand, stretch hose, dusting brush and a crevice tool. 1.
Lifetime Belt Protection Warranty Model: CMPS-QDZ Your vacuum belt is covered with a lifetime warranty. Should the vacuum belt break, simply bring your vacuum to the retailer where purchased and a new belt will be installed. Jammed Brushroll Model: CMPS-QDZ 1. If an object, such as a throw rug or article of clothing is ever picked up into your vacuum, the vacuum will sense this “jammed brushroll” condition and turn off the brushroll.
How to Clean the Nozzle Hose CAUTION: Unplug the vacuum cleaner. The nozzle hose, located on the back of the vacuum cleaner, carries the dirt from the nozzle to the vacuum bag. The hose inlet also functions as the attachment accessory opening. (models CMPS-1T and CMPS-1N only). Fig. 1 Fig. 2 If the hose should become clogged: Models: CMPS-1T and CMPS-1N 1. Pull out and turn the lid of the cleaning attachment opening. Remove the clog or blockage (Fig. 1). 2.
Thermal Fuse Protection Your CleanMax vacuum cleaner comes equipped with a Manual Reset Thermal Fuse Protector. This thermal protector is designed to protect your vacuum cleaner from overheating due to a cutoff in airflow (i.e. clogged hose, operating the vacuum without a bag). Should this situation occur, the thermal fuse protector will safely shut off your vacuum cleaner to avoid any potential damage. To reset the thermal fuse 1. Unplug the vacuum cleaner. 2.
Owner’s Information (keep this for your records) The model and serial number of this product may be found on the bottom of the unit. You should note the model and serial number of your unit in the spaces provided below, and retain this book as a permanent record of your purchase.
Warranty What is Covered: This warranty covers any defects in material and workmanship in your new CleanMax vacuum. How Long Coverage Lasts: Warranty coverage for your CleanMax vacuum lasts one year. What is Not Covered: • Damage to the vacuum which occurs from neglect, abuse, alterations, accident, misuse or improper maintenance. • Normal replacement items: belts, agitator brush strips and disposable bags.
CLEANMAX CleanMax Vacuum Cleaners PO Box 730 Fenton, MO 63026 cleanmaxvacuums.com ©2017 CleanMax Vacuum Cleaners.
