Operation Instruction Safety Information Safety Specifications and Instructions for Battery of Mobile Phone Recommended Use Considerations ·Before the use of battery, please carefully read this operation instruction and the battery surface mark. ·During use, the battery shall be away from the heat source and the high pressure, and the children shall be prevented from playing batteries. Never knock the battery. This battery shall be only charged with the original match able charger.
80℃. Overheat will cause short circuit inside the battery to result in battery heating, smoking, distortion or burning. ·Use the special charger and correctly charge The use of non-special charger to charge the battery will cause danger. Charging in the abnormal condition will cause the loss of the function of the protection circuit inside the battery and abnormal chemical reaction, and the battery may be heated, smoke, and be distorted or burnt.
following suggestions will help the users better use and maintain the mobile phone. ·Place the mobile phone and all parts at the place that the children cannot touch. ·Do not store the mobile phone at the high temperature place. High temperature may shorten the service life of the electric device, damage the battery, distort or melt some plastic parts. ·Do not store the mobile phone at the low temperature place.
There is no part for the user to self-repair in the mobile phone. If you doubt that the mobile phone is damaged, please rapidly send it to the designated service and maintenance center to be maintained by the qualified technical personnel. Never disassemble the mobile phone by yourself, otherwise you may suffer from electric shock or other injuries. Never let the children to use the mobile phone or its fittings.
1.3.1 Battery Charging When the new battery is not fully charged, before the use of mobile phone, you should use up the power of the battery, and then charge the battery by the following ways. 1. Insert the connector of the charger into the charger socket of the mobile phone. 2. Insert the charger into the power supply, the battery symbol will be dynamically displayed, indicating that the battery is being charged.
Set screen locking→password. 1. Set screen locking→password locking. 2. Enter four characters at least. 3. Continue to select. 4. Enter the character password again to confirm. 5. Select OK. After the password is set, the mobile phone will require to slide towards the upside to enter the unlocking password when being turned on each time. If you want not to enter the unlocking password, please change the screen locking in “Set→security”, enter the unlocking password, and then click None.
View IMEI number in Status message. 2. Enter “*#06#” in the dial pad to query IMEI number. 2.5 Main Keys Key Definition HOME key Return to home screen Task Key Enter to Task Manager Manager Return key Return to the previous screen Power key Turn on/off, sleep, wake up, long press 10 seconds to re-boot. Volume Key Adjust the volume and press the “volume” key on the camera interface to photograph (No wake-up function). 2.6 Screen sleep and wake-up 1.
3. Click and press a network to connect. 4. If the network is protected, the system will prompt to enter the password. Consult the network service provider or administrator for concrete details. 2.8.1 Delete WLAN network You can make the mobile phone not store the remembered WLAN network details. 1. Turn on WLAN function. 2. Click and press the connected network name in the WLAN setting screen. 3. Click in the opened WLAN dialog box to cancel the stored. 2.
3.2 End a call Click or click and press Hang up to end a call. 3.3 Answer or Refuse to answer a call When you receive a call, the relevant incoming information will be displayed on the screen. If you have a missed call, you will receive a notice. Slide the icon on the incoming call interface to to answer the call(drag the screen lock controller rightward to answer the call if the screen is locked).
3. Press the right item, and click the “IP Dial” at the bottom, you can input the number prefix manually, then select any number to IP Dial directly. 4. Press Menu→Remove call records to remove the list of call records. 3.10 Make an emergency phone call Notes: your network service supplier has set one or more emergency numbers. There are different emergency call numbers in different countries, so the emergency call numbers of your mobile phone will not be valid in all regions.
1. Click the Contacts on the main menu interface and enter the contact list. 2. Click group label on the top right to enter the contact groups interface to view or manage your groups. 4.6.2 Add group 1. Open the contact group interface. 2. Click the group icon in the upper right corner-Add Group to add group. 3. Name the group and click OK. 4.6.3 Add members to a group 1. Enter the contact groups interface. 2. Click the group name and view the group members. 3.
3. Enter the phone number or email address of the receiver into the receiver box,or select receiver from the contacts list by clicking the icon on the right. 4. Click the Enter Message box to enter message. 5. Press menu key→Add Theme, to add message theme. Note: A SMS will change into a MMS automatically upon a theme, attachment, etc. are added. Conversely, a MMS will change into a SMS automatically upon the theme, attachment, etc. are deleted. to choose required attachment. 6. Press the icon 7.
You can read and send email conveniently via the phone. The “Email” with a built-in guide can make your email service settings very easy. 6.1 Set your email account 。You need to set your email account when using the email function first time. 6.1.2 Click Email on the main menu interface to open it and set your email account. 6.1.3 Enter your email address and password, and click Next button.
7. Chrome Browser You can use the browser to view the web pages or search relevant information on the Internet. Note: 1. Your mobile phone can be enabled to visit the network and the network-based applications through the browser. If required, please contact your network service provider for advice on how to connect. 2. As the relevant data traffic cost must be generated when the browser is used, please contact your network service provider for specific charges. Main menu->Chrome browser 1.
3. Display the collected bookmarks on the home page, click bookmarks and the mobile device bookmarks; click to view the saved to view tab histories opened and closed recently as well as information related to other equipments. Note, please log in Chrome for the other equipment. 4. Click on the right of the search bar and open the option bar.
Click Music in the main menu, then the system will automatically scan audio documents in your phone. Scanned audio documents will be displayed in the list. After opening the music application, you can see 4 labels, musician, album, songs and playlist. By pressing any view mode on the music interface, you can open the music list in various modes. 8.2.2 Delete songs from SD card 1. Open the music application and view audio document list. 2. Press and hold a song. 3. Select Delete from the popping window. 4.
8.6 Control buttons of the music player Function Instruction Play/Pause Click and Press Previous/next song Click and Press Fast forward/Rewind Press and hold View playlist Click and Press Shuffle Click and Press Repeat Click and Press Sound effect Click and Press Sound effect Click and Press side volume key up or down 8.
Click Video button and view video list. Click Video button and view video list. 9.3 Share video Click Video button and view video list. Press and hold a video, and select Share from the popping dialogue box. 10. Camera Your phone is installed with an 8 mega-pixel camera for shooting. You can take a picture of anything via the camera, and then set any picture as wallpaper or share pictures via message, Bluetooth, email, etc. The phone saves the pictures you take into external SD card and internal storage.
screen to switch to shooting mode. 3. Aim the camera at the target location/object. 4. Click to take a picture. Thumbnail of the latest photo you take is shown at the lower right of the screen. Press the thumbnail to view the photos. ·Press the Menu button, select Delete, to delete the photo. ·Press the Menu button, select Play Slides, to play your photos as slide show. ·Press the Menu button, select Edit, to edit photo.
10.4 Set Camera Shooting Mode Click to enter the camera setting mode, you can according to your needs for camera exposure, effects, shooting and other settings. As shown: 11. Picture Library You can open the picture library to view your pictures album. 11.1 View picture album Click Picture Album from the main menu and view the picture album..
The picture album can show pictures in SD card or the phone, including the pictures you take by the camera and download from internet or other devices. 11.2 Process pictures 11.2.1 View and browse pictures 1. Click the picture library to open it and view picture album. 2. Click an album in the list to open it, and then the pictures in the album will be shown in the thumbnail format. 3. Click a thumbnail to view it in large format. 11.2.2 Delete picture Click the Menu button->Delete, to delete the picture.
3. Set related parameters and slide rightward for activating the clock. 12.2 Calendar 1. Enter Calendar from the main menu. 2. Click the dropdown button at the upper left corner to view date, week, month views, schedules, year views etc. 3. Click the menu button, to create an event. 4. Click the Menu button, to search, refresh, show calendar or set the calendar, etc. 12.3 Calculator 1. Enter the calculator from the main menu. 2. Enter numbers and select operators. 3. Click equal sign. 4.
operating the radio). 1. Click to turn off or turn on the radio. 2. Click to turn on or turn off the loudspeaker. 3. Click to enter the radio station list interface searched by the radio. 4. Click to search radio stations previous to the current radio station frequency band. 5. Click to search radio stations following the current radio station frequency band. 6. Click 7. Click to add Favorite or cancel Favorite to record the radio, also can view the saved recording. 13.
a. Switch on/off SIM card: after SIM card is fit in, the SIM card operator can be shown and the SIM card can be switched on/off. Note: when 2 SIM cards are fit in, the 2 SIM cards cannot be forbidden simultaneously. When 1 single SIM card is fit in, the SIM card cannot be forbidden. b. Preferred SIM card: the SIM card for mobile data networks, calling and messages. 4、 Data flow consumption a. View mobile data network flow consumption by every application module of SIM 1 and SIM 2. b.
Wallpaper: to set desktop wallpaper. Luminance: adjust screen luminance. Automatic Luminance Adjustment: slide the switch to switch on/off Screen Luminance, the screen luminance can be optimized as per the environmental light changes after the Screen Luminance is switched on Hibernate: delay before auto screen lock. Interactive screensaver: set screensaver. Font size: set font size. Auto-rotate Screen: rotate screen contents to keep current direction. 2.
Unknown source: allow applications not from the non-market to be installed. F. Credential storage Storage type: default hardware support. Trusted credential: display trusted CA certificate. Install from phone: install the certificate encrypted from phone. Erase Credential: erase all credential saved and reset other passwords. G. Advanced Trusted agent: view or deactivate trusted agent. Screen fixing: the device can always show the current screen.
(supported in the network) to support opening/closing. c. Set date: after switching off the automatic confirming date and time function, you can set date manually. d. Set time: after switching off the automatic confirming date and time function, you can set time manually. e. Select time zone: after cancelling the automatic confirming time zone function, you can set time zone manually. f. Adopt 24-hour format: after check this option, the 24-hour format will be adopted. 2.
On the main screen, tap the shop icon into the application. When you first time enter to Play store, you need to create a new account, you can follow the prompts to complete the creation process. When you use the account to enter Play store home page, you can see a variety of mobile phone software, you can choose according to your needs and install it to your phone. You can slide the screen to the category, Top Free, Top Free new products, fastest rising to find the popular software.
After the download is complete, click Open, you can start to apply your newly downloaded this software: In the Play Store homepage, click the menu key to bring up the following menu: Select "My apps", you can view your "Installed application" and "All apps", you can also reset accounts, notifications, auto-updating applications, password, etc.
Other Google services, such as: Gmail, Google set, Google Talk, will need to apply for Google account, after landing Google services in order to properly use Google related services.
and far Echo map Due to poor network trunk, is a or regional problem noise Hang up and redial, trunk lines may replace good one. Some regional bad line Standby time is related to the network system setting in the poor reception area. The battery need to replaced, Standby please replace new battery. time shorter Turn off the mobile phone Please replace new battery.
to call function cancel the fixed dial set up the fixed dial function function. input incorrect PIN Code in contact your network PIN error three times service supplier. need to replace new Battery or charger damaged battery or charger Unable to Charge in lower than -10℃ or higher than 55℃ environment charge change the charging environment check whether the plug Bad contact connection well Unable to Phonebook memory is full delete some part of add phonebook phonebook record.
FCC Warning: Any Changes expressly or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.