Signal Mobile Phone User Manual Trand name:plum Model name:P110 FCC ID:Y7WPLUMP110
Contents 1.Getting to know your phone ........................ 1 1.1 Your Phone .............................................. 1 1.2 Installing SIM card and battery................. 1 1.3 Installing Storage card ............................. 1 1.4 Battery charging ....................................... 1 1.5 Power on/ off ............................................ 1 1.5.1 Power on ........................................... 1 1.5.2 Power off ........................................... 1 1.
9.5 Bluetooth .................................................. 6 9.6 FlashLight ................................................. 6 10.My files ......................................................... 6 11.Settings ........................................................ 6 11.1 Date & time ............................................. 6 11.2 Language settings................................... 6 11.3 Display .................................................... 6 11.3.1 Wallpaper settings ................
the T-Card into the slot vertically, make sure that the gold contacts of the card face upwards, until the card fixes itself in the card slot. 1. Getting to know your phone 1.1 Your Phone (5) Follow the arrow direction of "LOCK" on the 1.2 Installing SIM card and battery T-Card slot cover, pull card slot cover to lock the card slot. (1) Hold on 【End Key】 for about three seconds to switch off the phone. 1.4 Battery charging (2) Remove the battery cover. (3) Remove the battery.
2.2 Answering or rejecting a call Warning: Don’t switch the phone on in areas where wireless phone usage is prohibited or where it may cause interference or danger, and also make sure that you haven’t activated the function “Auto power on/off”. 2.2.1 Answer a call When there is an incoming call, you can press 【Call Key】to answer. 2.2.2 Reject a call When there is an incoming call, you can press 【End Key】to reject it. 1.6 Using shortcut keys 2.
SIM1: The input record will be saved to SIM1, 5. Message with each name one phone number. SIM2: The input record will be saved to SIM2, with each name one phone number. 5.1 Write message 5.1.1 New SMS On the Home Screen, press【Left Soft Key】and select [Message→Write message→New SMS] to edit a new SMS directly. After writing an SMS, select to send the message. 4. Call logs Enter the main menu, and then select [Call logs] to enter the call list. 4.1 Missed calls 5.1.
5.6 Templates 7. Profiles While editing messages, you can directly cite the preset common phrases. Select to set the common phrases by yourselves. The mobile phone provides multiple user profiles, so that you can customize some settings to adapt to the specific events and environments. Customize the user profiles according to your preference and then activate the user profiles. The user profiles fall into five scenarios: Normal, Silent, Meeting, Indoor, Outdoor. 5.
Press【OK Key】to play or pause While playing a song, press 【End Key】to quit the Playing screen to enter the background playing mode. the main menu, select [Multimedia→Recorder], and choose to start recording. Select to have the recording pause for a while, select to cease recording. After ceasing the recording, the recorded file will be automatically save in the folder [Audio], select to check. 8.5 Video 9.
.5 Bluetooth 11.3 Display With Bluetooth, you can make a wireless connection to other compatible devices, such as mobile phones, headsets and car kits. You can use the Bluetooth to send images, video clips, music, sound clips and notes, and transfer files from your compatible pc. 11.3.1 Wallpaper settings Select the default or other pictures as the wallpaper of the phone. 11.3.2 Idle style ”Standard style” and “Smart style” are available. 11.3.
11.4 Call settings and outgoing calls. 11.4.1 Dual-SIM Standby mode: You can select the standby mode for SIM card, either to have one SIM card standby, or to have both SIM cards standby simultaneously. Reply by original SIM: You can activate the function to reply from current SIM card for call and SMS. Set SIM name: You can name the Card as you want. 11.4.2 Call divert Based the set diverting conditions, incoming calls will be forwarded into voice mail or other numbers. 11.4.
reminder will be heard at the set second of every minute during your call, so that you may end the call timely to save the phone fare. Auto redial If you set this function on, the phone will redial the number after an unsuccessful call, Caution: If you input your PIN code incorrectly three times in succession, the SIM card will be locked automatically, and prompting to enter PUK code to unlock it. Therefore, please do remember the PIN code, if you modify it.
11.5.2 Modify PIN2 PIN2 code is the personal identification code required for some certain functions (such as set fixed number, set phone fare, etc). PIN2 code is another password provided together with SIM card by service provider. If wrongly input it for three times in succession, the phone will be locked until correct PUK2 code entered, for detailed operation, please refer to PIN code and PUK code.
factories or blasting scene, and adhere to any safety signs and instructions there. Breaking any rules may cause explosion or injury. Phone using in plane will interfere with the flight operation and bring dangers. Therefore, please do switch off your phone before boarding, and make sure it is power off during the whole flight. Please keep the phone in its special bracket while you’re driving. Please don’t put it on a seat or in places where it could fall off when the car encounters collision or break.
out more, please consult your doctor or medical device manufacturer. 13.2.1 Pacemaker Pacemaker manufacturers advise the distance between your phone and heart pacemaker should be 6 inches (15.3 cm) at least, otherwise the phone could interfere with the pacemaker. The personnel who wears pacemaker should do the followings: Should always keep a distance (at lease 6 inches) between the phone and pacemaker, when the phone is switched on. 13.2.
13.3 Password access 13.3.3 PIN2 code This is the password for activating special functions of the SIM card. You need to input it while entering some functions (eg.Charge Unit, Fixed Dialling etc). Usually, the PIN2 code and the SIM card will be provided together. If you incorrectly input the PIN2 code for three times in succession, it will be locked and you will need to input PUK2 to unlock it. 13.3.4 PUK code This is used to unlock the PIN code. Usually the PUK code and SIM card are provided together.
Try not to use the phone while charging. The battery icon stops scrolling while the 13.4 Cautions for battery charging The phone provides power by using a lithium battery. The standby time and call time will be influenced by the system’s environment and phone settings. Please use the approved battery and charger designated for this product. The company will take no responsibility for damage caused by unauthorized battery or charger.
Do not leave the battery in places with Please deal with the discarded battery over-high or over-low temperature, otherwise, the battery capacity will be reduced and battery life will be shortened. Always try to keep the battery in room temperature. Do not short-circuit the battery. This may damage the electronic core or internal protected circuit. If you keep the unused battery in the pocket or bags, metal objects (eg.
Please don’t have the volume over loud while FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S.
0.5cm must be maintained between the user's body and the back of the phone, including the antenna, whether extended or retracted. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 0.5cm separation distance between the user’s body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.
the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
-Consult the dealer or an experienced radio/TV technician for help Do not use the device with the environment which below minimum -10℃ or over maximum 50℃, the device may not work. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.