User's Manual

ManualsBrandsClassic Tech Development ManualsElectronicsWireless Audio Transmitter

900MHz Digital Hybrid Wireless Shower Speaker

Warnings

- To avoid electric shock, do not handle the transmitter base or AC adapter

with wet hands.

- Do not attempt to repair or modify this unit.

- Do not use attachments not recommended by the manufacturer.

- Do not drop, shock or apply pressure to the unit. This may cause

permanent damage.

Battery Precautions

- Only use specified AA batteries or equivalent replacements with this unit.

- Batteries may leak or explode if recharged, inserted improperly, disposed

of in fire or mixed with different types.

- When installing batteries, observe proper +/- polarities. Batteries positioned

incorrectly may leak and cause damage to the unit.

- Never attempt to recharge conventional dry cell batteries.

- Replace only with fresh, new batteries.

- If unit will not be used for a long period of time, remove batteries to prevent

damage or injury due to possible battery leakage.

- Keep all batteries away from children.

Summary of content (7 pages)

PAGE 1
900MHz Digital Hybrid Wireless Shower Speaker Warnings - To avoid electric shock, do not handle the transmitter base or AC adapter with wet hands. - Do not attempt to repair or modify this unit. Do not use attachments not recommended by the manufacturer. Do not drop, shock or apply pressure to the unit. This may cause permanent damage. Battery Precautions - Only use specified AA batteries or equivalent replacements with this unit.
PAGE 2
General Instructions Overview This 900MHz shower speaker system utilizes the latest advances in wireless transmission technology to deliver dynamic, high-quality audio from virtually any audio/video device, indoors up to 150 feet away. Simply connect the transmitter to a desired audio source: I-Pod, MP3, CD, DVD, Hi-Fi system or radio to enjoy wireless, full spectrum sound without complicated wiring and installation while having a shower. Features - Waterproof speaker.
PAGE 3
Auto Tune Volume +/- Bass Boost Power On/Off Button Buttons Button Button Transmitter Operation 1. Plug the included AC adapter into a standard wall outlet. 2. A blue POWER indicator illuminates when the AC adapter is plugged in. If the blue POWER indicator does not illuminate, ensure the adapter is plugged in. 3. Insert the adapter connector plug firmly into the DC jack located at the back of the transmitter. 4. Open the cover on the top of the transmitter, you can pull out a 3.
PAGE 4
6. You can also connect one end of the supplied audio cord to the rear of the transmitter, and connect the other end to the output jack of any of your desired audio sources, like MP3, CD, DVD, TV, Radio recorder, etc. 7. When an audio signal reaches the transmitter, the green SIGNAL indicator illuminates together with the blue POWER indicator. If the green SIGNAL indicator does not illuminate, ensure the audio source is switched on. Speaker Battery Operation 1.
PAGE 5
21 feet 5. To locate the strongest operating frequency, press the AUTO TUNE button located on the front speaker panel. When the Auto Tune function is engaged, frequency scanning begins automatically and stops when a signal is detected. 6. You should experience interference-free speaker reception during normal room to room operation.
PAGE 6
Speaker Operation Note: When transmitting over long distances, the audio signal becomes weaker and interference increases. If the source signal is too weak for reception, the transmitter automatically switches off after approximately four minutes to protect the unit and save power. If the source signal returns to an adequate level, the transmitter automatically switches back on. Power Off To switch off power, press the ON/OFF button on the front panel of the speaker.
PAGE 7
- Speaker batteries may be too weak. Replace with new batteries or connect with the AC/DC adapter (not supplied). Ensure that the volume level is set to a moderate level. The audio signal input level is too low. Increase the volume level of the audio source.