SP1390 2.4GHz Digital Wireless Speakers User’s Manual Please read before using the equipment. Please visit www.promowide.com for details.
INTRODUCTION This 2.4G digital wireless speakers system uses latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and i-Pod/CD/MP3/VCD/DVD player. Without complicated wiring and installation with your Audio/Video equipments and rear channel amplifier, the system enables you to enjoy thrilling, lifelike sound in minutes. FEATURES 1. 2.4G Digital technology. 2.
SPEAKER RECEIVERS INSTALLATION TRANSMITTER 1. Connect the supplied AC/DC power adaptor to an electrical wall outlet. 2. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter. 3. Plug in the AC adapter and press on the “Power” button, the blue POWER LED illuminates. If the blue POWER LED does not illuminate, make sure the adapter is plugged in. 4. You can connect different kinds of audio devices, such as i-Pod, MP3 or MD to the transmitter by the audio cord provided. P.
SPEAKER RECEIVERS 1. Insert 6 pieces ‘AA’ size ALKALINE batteries into the battery compartment with correct polarity at the back of each speaker (batteries not included in the package) or connect the 12V power adaptor to the DC input jack on the back of each speaker, then plug them to the wall AC outlet. 2. Tune the On/Off button of the speakers to ON position and adjust the volume level. The POWER LED at the front will light up in green.
. You should now be able to place your speakers freely from room to room without disruption. Should there is any disruption (signal cuts off or carries distortion), press the speaker’s “CHANNEL” button to maximize the best reception. If you could still hear the interference, press the “CHANNEL” button on the transmitter as well. When transmitting / receiving over long distances, the signal from the system will become weaker. This device must be used with the AC/DC adapters supplied in the package.
TECHNICAL SPECIFICATIONS Transmission Mode : UHF Carrier Frequency : 2.4G Digital Operation Voltage : Transmitter, DC 9V 150mA 6 X ‘AA’ size Alkaline batteries for each speaker (not included) or DC 12V 600mA adaptors (included) Frequency Response : 20Hz – 20KHz Distortion : 0.5% S/N Ratio : 80dB (typical) Channel Separation : 65dB (Typical) Operation Distance : Up to 100 feet in open area Output Power : 2.5 Watts per channel NOTE: 1.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). 1.1 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
LIMITED WARRANTY PARAGON PRODUCTS INTERNATIONAL INC. (The Company) warrants to the original retail purchaser of this product that should this product proven to have defects in materials or workmanship for a period of one year from the date of purchase, Paragon will repair such defects or replace this product with one of similar features and price, without charge for parts and repair labor.
