Product Manual

CAUTION!
Let your heater cool before
you put your cover on.
Installation
Check your standup heater to
make sure there are no sharp
objects or corners that could
stress your cover as you pull
it on.
Completely unzip your cover
all the way from the top to the
bottom and around the top.
Undo the rip-and-grip closure at
the bottom of your cover.
Using a stepladder, carefully slip
your cover over the top of the
heater and zip it closed around the
top. Now zip your cover closed up
from the heater base. Close the
zipper together at the bottom of
your cover. Then zip your cover up
to the top of your heater. Close the
rip-and-grip closure at the bottom
of your heater.
Cleaning and Care
Clean your cover with a soft brush
and luke-warm water. DO NOT
USE SOAP as it may remove the
protective coatings added by the
factory. Air dry.
Storage
To avoid any possibility of mildew
be sure your cover is completely
dry before you store it in an
enclosed area for a long period.
Three Year Warranty
This cover is factory warranted for
workmanship and materials for
three years after purchase.
Instructions: Standup Patio Heater Cover
08cH5571952
This cover will fit both
round or square base
standup patio heaters.