WH200 D UAL C HANNEL S TEREO I NFRARED H EADPHONES OWNER’S MANUAL INSTALLATION GUIDE
OWNER’S MANUAL/INSTALLATION GUIDE WARNING! THE CLARION WH200 DUAL INFRARED HEADPHONES ARE DESIGNED FOR LISTENING TO VIDEO OR AUDIO SOURCES FOR REAR SEAT PASSENGERS ONLY. If you do not have the required knowledge and experience to successfully complete the installation, we strongly recommend consulting an authorized Clarion Pro Audio dealer about professional installation options.
WH200 DUAL CHANNEL INFRARED HEADPHONES INTRODUCTION The Clarion WH200 is a full-featured Dual Channel Infrared Headphone System specifically created for the mobile environment. The WH200 frees you from the tangle of headphone wires and lets you enjoy music or TV audio without the clutter of cables. To ensure the best performance of your system, please read this manual carefully.
OWNER’S MANUAL/INSTALLATION GUIDE DESCRIPTION OF CONTROLS AND INDICATORS Infrared Transmitter 1 IR Array window Point Infrared LED array window toward users. 2 Mounting hole locations (covers removed) Use M4x12 sheet metal screws to attach IR Transmitter. (see Mounting Description on page 7). IR TRANSMITTER SPECIFICATIONS General Specifications Figure 1. The WH200 Transmitter descriptions. Power Requirement: 12 volts dc Power Consumption: 1 watt, Power On Dimensions (w x h x d): Mounting Base 3.
WH200 DUAL CHANNEL INFRARED HEADPHONES DESCRIPTION OF HEADPHONE CONTROLS Infrared Headphones 3 POWER Switch Main power switch turns headphone power off to prevent accidental micro switch activation during storage. 4 POWER Indicator When illuminated the headphones are fully functional. The indicator will turn off when the headphones are removed or when the power switch is turned off. 5 CHANNEL SELECTION A/B Switch Allows user to choose the audio source.
OWNER’S MANUAL/INSTALLATION GUIDE BATTERY INSTALLATION 1. Open the battery compartment by sliding the cover toward the bottom of the Headphone. 2. Place two (2) alkaline AAA batteries into the battery compartment of the Headphones, making sure that the battery polarity is correct. 3. Snap the battery cover back into place. OPERATION DESCRIPTION PLEASE READ CAREFULLY TO PREVENT DAMAGE TO THE HEADPHONES OR YOUR EARS. 1. Be sure batteries are properly installed in the Headphones. 2.
WH200 DUAL CHANNEL INFRARED HEADPHONES OPERATION PRECAUTIONS: • Do not allow liquids or foreign objects to enter the WH200 IR Transmitter or Headphones. • If any unit should become wet, turn off all power and let your authorized Clarion Pro Audio dealer clean or service the equipment. DO NOT ATTEMPT TO OPEN OR SERVICE THE IR TRANSMITTER OR HEADPHONES. THE INTERNAL PARTS ARE NOT USER-SERVICEABLE. DOING SO WILL VOID THE WARRANTY. • Do not drop or excessively jar the WH200 headphones.
OWNER’S MANUAL/INSTALLATION GUIDE any holes or installing any screws. MOUNTING DESCRIPTION • Always wear protective eyewear when using tools. • Use only high-quality RCA cables that are no longer than necessary. Extra-length audio and video cables can cause signal loss and act as an “antenna” for noise. • When routing RCA cables, keep them away from power cables and output speaker wires. Blind Nut Blind Nut Opening for Cables • If a fuse needs replacement, use the same value as the original.
WH200 DUAL CHANNEL INFRARED HEADPHONES WIRING DESCRIPTION Figure 5. The WH200’s input connectors and wiring.
OWNER’S MANUAL/INSTALLATION GUIDE FCC STATEMENT TROUBLESHOOTING Symptom Cause Solution System does not work. Fuse is blown. Replace external fuse with the same value. Headphone Power wires not Check Battery and indicator illu- connected. Ground wiring at tranminated but no mitter. sound. No power indi- Batteries not cator on head- inserted. phone. Battery polarity improper. No sound from Wrong audio channel selected headphone. Micro switch not activated.
Clarion Corporation of America ©2000 Clarion Corporation, Gardena, CA 661 West Redondo Beach Blvd Gardena, CA 90247 800-Go-Clarion www.clarion-usa.com 2000-WH200-10 Rev.