Owner’s manual & Installation manual VRX756VD AM/FM DVD VIDEO / VIDEO CD / CD / MP3 PLAYER / CD CHANGER CONTROLLER WITH 7" LC DISPLAY Clarion Co., Ltd. All Rights Reserved. Copyright © 2005: Clarion Co., Ltd. Printed in Japan / / / 2005/2 (Y·Y) +VRX756VD-001-cover 1 R QC-6822K 280-8207-00 05.1.
English Owner’s manual Thank you for purchasing the Clarion VRX756VD. ∗ This owner’s manual is for the VRX756VD. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DVD changer, TV tuner, iPod control, 2-ZONE control, 5.
The Color LCD Display and the Information Panel on the main unit show the following displays, providing information about the mode and functions operated. Operation status indication ∗The frequency, play time, clock, etc. are displayed. 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper playback may not be possible.
[FRONT OPEN] [SENSOR] [ISR] [DISP] [TILT] button Names of Buttons Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). [VOL] button [ADJ] button [Q] button • Use this button to increase/decrease the volume. • Shows the ADJUST MODE menu to change the settings when the liquid crystal panel is open. • Press and hold this button for 1 second or longer, the liquid crystal panel can be switched to a composite screen to lock the monitor.
[FRONT OPEN] [SENSOR] [ISR] [DISP] [TILT] button Names of Buttons Note: • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). [VOL] button [ADJ] button [Q] button • Use this button to increase/decrease the volume. • Shows the ADJUST MODE menu to change the settings when the liquid crystal panel is open. • Press and hold this button for 1 second or longer, the liquid crystal panel can be switched to a composite screen to lock the monitor.
The Color LCD Display and the Information Panel on the main unit show the following displays, providing information about the mode and functions operated. Operation status indication ∗The frequency, play time, clock, etc. are displayed. 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper playback may not be possible.
English Color LCD Display Mode name Owner’s manual •Radio mode : FM1 98.10MHz Pch 1 (band/frequency/preset No.) •DVD changer mode: D2 T02 C002 01:08:20 (disc No./title No./chapter No./ playback time) •DVD video mode : T01 C003 00:08:20 (title No./chapter No./playback time) •Video CD mode : T01 00:01:18 (track No./playback time) •MP-3 mode : F001 T001 00:04:07 (folderNo./track No./playback time) •CD mode : T 02 04 : 07 (track No./playback time) •CD changer mode : D2 T02 00 : 45 (disc No./track No.
English 6. OUTLINE OF BUTTON AND TOUCHKEY OPERATION Owner’s manual ∗2 ∗1 Engine ON position System check The CeNET format utilized on this unit is provided with a system check function. The operation panel’s system check menu is displayed under the following conditions: • When power is first turned on after initial installation. • When an external device is connected or disconnected. • When batteries are changed or otherwise when power is disconnected. • When reset button is pressed.
English (Radio mode screen) (Next page) Owner’s manual (List screen) ∗3 (KEY PAD screen) ∗5 (Title input screen) ∗4 1 0 7 9 0 ENT ∗6 ∗7 Notes: ∗1: The operation button is [OPEN] button in the description of operation per mode. ∗2: External equipment not connected with CeNET is not displayed. ∗3: The operation key is [SRCH] key in the description of operation per mode. ∗4: This shows a KEY PAD selection example in the radio mode when 107.90 MHz is selected.
English (Radio mode screen) Owner’s manual (SOURCE menu) ∗8 ∗9 ∗11 (DVD mode screen) ∗10 (SUB menu) Notes: ∗8: The SOURCE menu screen displays icons for components connected to the main unit. The icons serve as touch keys for selecting play modes. ∗9: Pressing the [SOURCE] button changes to the following play modes. P.TIME ∗12 ∗10: Screen during DVD mode when automobile is moving. ∗11: When displaying images in DVD mode, touching the screen surface will cause the menu screen to be displayed.
English (Next page) Owner’s manual (ADJUST mode menu) (DVD SETUP menu) (MONITOR menu) MONI ADJ PARENRTAL LEBEL VRX756VD +VRX756VD-009-Eng1 13 05.1.
English (ADJUST mode menu) Owner’s manual When a 5.1 ch Surround Decorder is connected (AUDIO mode menu) (GENERAL menu) BAL/FAD CLOCK 14 VRX756VD +VRX756VD-009-Eng1 14 05.1.
English (AUDIO EXT. menu) STATUS SPEAKER SEL DSF SUB WOOFER VRX756VD +VRX756VD-009-Eng1 15 Owner’s manual (AUDIO mode menu) 05.1.
English 7. REMOTE CONTROL Remote control unit Owner’s manual Signal transmitter Operating range: 30˚ in all directions [BAND] [MUTE] [SOURCE] [VOLUME] [P.TIME] [0-9] [DISP] [DISC SEL] [ ],[ ] [SEARCH MODE] [MENU] [RTN] [DVD TITLE] [SET UP] [ [ENT] ],[ ] [ISR] [2-ZONE] [RPT] [SCN] [RDM] [AUDIO] [PBC] [SLOW] [ANGLE] [SUB TITLE] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.
When 2-ZONE function is OFF: ● Shared modes ● DVD player mode [BAND] button • Press to return to the first chapter in DVD video mode. • Press to return to the first track in CD/MP-3 mode or video CD mode with the PBC function turned off. [P.TIME] button [SOURCE] button • Press and hold this button for 1 second or longer to turn on or off the power. Power on/ off, switches among radio, TV, etc. [VOLUME] button • Increases and decreases volume.
English Functions of Remote Control Unit Buttons Owner’s manual [SCAN] button [RDM] button • Press to perform chapter scans in DVD video mode and track scans in CD mode. Press to perform track scan and hold down to perform folder in MP-3 mode. • Press to play tracks at random and hold down to play folders at random. [RPT] button [BAND] button • Press to perform chapter repeat in DVD video mode and track repeat in CD mode.
Removing the DCP 1. Press the [SOURCE] button for 1 second or longer to turn off the power. CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP. Attaching the DCP 1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP into the main unit. [SOURCE] button DCP [FRONT OPEN] button 2. Deeply push in [FRONT OPEN] button to unlock the front panel. ∗ If the front panel does not open fully, gently open it with your hand. DCP 3.
English 9. CAUTIONS ON HANDLING Liquid crystal panel/Generalities Owner’s manual For a longer service life, be sure to read the following cautions. • Be sure to store the liquid crystal panel inside the main unit when parking the car outdoors for long period of time. The liquid crystal panel will operate properly in a temperature range of 0 to 60˚C. • Don’t allow any liquids on the set from drinks, umbrellas etc. Doing so may damage the internal circuitry.
DVD Video Features This unit provides the following functions in addition to the high image quality and sound quality of DVD video. Notes: • The functions described in the section, “Features”, for example, the recorded language, subtitles, angles, etc. differ with the DVD video disc. Refer to the instructions provided with the DVD video. • Some disc functions may operate differently than described in this manual.
English Discs TV color system This DVD player plays NTSC or PAL discs only and cannot be used for playback of SECAM discs. Playable discs This DVD video player can play the following discs. Owner’s manual Playable discs DVD video discs video CDs CD TEXT Audio CDs About MP3 playback This unit can play back CD-R/CD-RW discs on which MP3 music data have been recorded. For a detailed information, see the page entitled “Listening to an MP3”. About the registered marks etc.
Basic Operations Note: Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Engine ON position Turning on and off the power Note: • Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press the [SOURCE] button. 2. The illumination and display on the unit light up.
English Basic Operations Opening and turning the liquid crystal panel Owner’s manual WARNING • To prevent the battery from going dead, operate this unit with the engine running, if possible. • When the liquid crystal panel is operating, be careful not to get your hand or finger caught between the panel and main unit or the instrument panel of the car. • Do not move the liquid crystal panel by hand. Standing up the liquid crystal panel 1.
Adjusting the AUDIO 1. Press the [OPEN] button and the liquid crystal panel is housed automatically. Note: • When leaving this unit unused for a long period of time or leaving your car, be sure to house the liquid crystal panel into the main unit. Note: • When the separately-sold 5.1 ch Surround Decoder (DVH940) is used, the bass and treble tone adjustments cannot be made. To adjust the tone, refer to the section “5.1 ch Surround Decorder Operations”.
English Basic Operations Adjusting the MID Owner’s manual The MID gain, MID frequency (center frequency) and MID Q can be adjusted as follows. 1. Press the [ADJ] button, then touch the [AUDIO] key. 2. Touch the [MID] key. 3. When the bass type selection screen is displayed, touch the key for the desirable type to select it. 4. Touch the [w] or [z] key to adjust to desirable level. GAIN : –6 to 6 (The factory default setting is “0”) FREQ. : 700Hz/1kHz/2kHz (The factory default setting is “1k”) Q : 1.
Adjusting the MONITOR Notes: • This function is not available when the display is stored. • The HUE setting can be adjusted only when the NTSC mode is selected. • Switch to the VISUAL/DVD player(DVD video or video CD)/DVD changer/TV mode you see. 1. Press the [ADJ] button to switch to the ADJUST MODE menu. 2. Touch the [MONITOR] key. 3. Touch the [MONI ADJ] key to display [BRIGHT], [HUE] and [COLOR] key. Touch the [BRIGHT], [HUE] and [COLOR] key to adjust BRIGHT, HUE and COLOR.
English Basic Operations Adjusting the GENERAL Setting the BEEP Owner’s manual ∗ The sound heard when you make operations is called “beep”. The unit can be set up so that it does not produce this beep sound. ∗ The factory default setting is “BEEP ON”. 1. When the panel is open, press the [ADJ] button to select the ADJUST MODE menu. 2. Touch the [GENERAL] key. Touch the [BEEP] key to select “ON” and “OFF”. 3. Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
English Basic Operations 2-ZONE Function About the 2-ZONE function Setting the 2-ZONE function ∗ The factory default setting is “OFF”. 1. Hold the remote control unit’s [2-ZONE] button depressed (about 1 second) to turn the 2-ZONE function ON. • The function can also be switched by touching and holding the main menu’s [2ZONE] key (about 1 second).
English Basic Operations Monitor image and sound with 2-ZONE ON/OFF ● With 2-ZONE function OFF Owner’s manual Front monitor lock ON (∗4) (∗1) Visual connection [OTHERS] Front image Image of device (receiver screen) connected to the Visual terminal (∗3) Visual connection [NAVI] Image of device connected to the Visual terminal Front monitor lock OFF (∗4) Visual connection Visual connection [OTHERS] [NAVI] Displays image of mode selected using the [SOURCE] button Rear monitor Displays image of mode sel
FM reception Listening to the radio 1. Press the [SOURCE] button and select the Radio mode. The frequency is displayed. 2. Press the [BAND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1... 3. Press the [a] or [d] button to tune in the desired station. Seek tuning 1. Press the [BAND] button and select the desired band. (FM or AM) 2. Tune in to a station.
English Radio Operations ●Using the LIST screen 1. Touch the [LIST] key. Owner’s manual 1. Press the [BAND] button and select the desired band. (FM or AM) 2. Touch the [LIST] key. 3. Touch and hold the [AS] key for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. Preset scan 2. Touch the corresponding [DIRECT] key to recall the stored station. ∗ You can select the desired band to touch the [BAND] key.
Changing DVD System Settings Selecting the DVD SETUP menu 1. Touch the screen to show the menu screen. 2. Touch the [SUB] key to display the SUB menu. 3. Touch the [SETUP] key to display the DVD SETUP menu. 4. Touch the [z] key. Touch the [w] key to return to the previous menu. This function allows displaying the important part of image fully on the screen. In some cases, image is displayed while being panned (scrolled). • N LB : A black zone is created in the top and bottom areas of the screen.
English DVD Video Player Operations 2. Touch the key to select a desired language to set it. ∗ The factory default setting is “ENGLISH”. Owner’s manual 3. Touch the [RTN] key ([ESC] key). Setting up the audio language 1. Following the steps 1 to 3 in “Selecting the DVD SETUP menu”, touch the [AUDIO LANGUAGE] key. 2. Touch the key to select a desired language to set it. ∗ The factory default setting is “ENGLISH”. 3. Touch the [RTN] key ([ESC] key). Setting up the subtitle language 1.
Input code 7284 7278 7477 7573 7772 7788 7077 7882 7890 7873 PALAU PANAMA PAPUA NEW GUINEA PARAGUAY PERU SAINT KITTS AND NEVIS SAINT LUCIA SAINT VINCENT AND THE GRENADINES SAMOA SOLOMON ISLANDS 8087 8065 8071 8089 8069 7578 7667 8667 8783 8366 SURINAME TONGA TRINIDAD AND TOBAGO TUVALU URUGUAY VANUATU VENEZUELA ANGUILLA ARUBA VIRGIN ISLANDS (BRITISH) 8382 8479 8484 8486 8589 8689 8669 6573 6587 8671 CAYMAN ISLAND CHRISTMAS ISLAND COCOS (KEELING) ISLANDS COOK ISLANDS FALKLAND ISLANDS (MALVINAS) FRENCH GU
English DVD Video Player Operations Basic Operations Pausing play Loading a disc Owner’s manual Insert a disc into the centre of the insertion slot with the label side facing up. The disc plays automatically after loading. Notes: • Never insert foreign objects into the disc insertion slot. • If the disc is not inserted easily, there may be another disc in the mechanism or the unit may require service. • 8 cm (single play) discs cannot be used.
Switching KEY PAD position 1. Touch the screen to show the menu screen. Touch the [MENU] key during playback. The DVD menus appears. The displayed contents may differ, depending on the DVD software. • Example showing DVD menu display When the KEY PAD becomes difficult to view in the menu display, you can move it to the other side of the screen. 2. To select the DVD menu contents, touch the [KEY] key. The “Cross KEY PAD” (wzÅ Î) is displayed. 3.
English DVD Video Player Operations Owner’s manual Slow playback Fast forward and fast backward 1. Press the [s] button or touch the [s] key, then press and hold the [d] button or the [∂] key. While the button or key is being pressed, slow playback continues at the speed 1/3 times the normal playback. • Slow playback cannot be performed in the backward direction. In addition, audio cannot be reproduced during slow playback. 1. Press and hold the [a] or [d] button during playback.
Using the title menu Scans and plays back all chapters recorded on the DVD-Video, the first 10 seconds for each. 1. Touch the screen to display the menu, then touch the [SUB] key. 2. Touch the [SCAN] key, then touch the [RTN] key. The message “C.SCN” will be displayed. After scan playback of all chapters on the disc, chapter scanning through the same disc is performed again. Depending on the disc, the menu may appear again after scan playback of all chapters within the title. 3. Touch the [C.
English DVD Video Player Operations Owner’s manual Switching subtitles Switching angles On DVD discs in which two or more subtitle languages have been recorded, you can switch among the subtitle languages during playback. 1. Touch the screen to display the menu, then touch the [SUB] key. 2. Touch the [SUB TITLE] key during playback. Each time you touch the key, you can switch among subtitles. • Depending on the disc, up to 32 kinds of subtitles may be recorded.
Watching a video CD Showing the V-CD menu (for V-CD discs with PBC) This key does not function on some discs. 1. Touch the screen to display the menu screen. Touch the [MENU] key during playback. The V-CD menu appears. The displayed contents may differ, depending on the V-CD software. • Example showing menu display Skipping a track (searching) 1. Press the [a] / [d] button or touch the [å] / [∂] key during playback. The track is skipped and playback starts.
English DVD Video Player Operations Owner’s manual Fast forward and fast backward Displaying the playback status 1. Press and hold the [a] or [d] button during playback. Press and hold the button, and the playback speed becomes 5-time faster first and then 20-time faster 3 seconds later. Release the button, and the normal speed is restored. • The same operation can be performed by touching the screen to display the menu screen, then touching the [å] or [∂] key.
Selecting a track on the LIST screen This function allows you to select tracks from a displayed list. 1. Touch the [LIST] key. The list menu will appear. 2. Press the [w] or [z] button to change the track display. 3. Touch the desired track title key. The corresponding track will begin playback. • The titles will scroll when the selected track’s “ ” mark is touched. 4. Press the [RTN] key to return to the previous screen. Other various play functions 1. Touch the [SUB] key.
English DVD Video Player Operations 3. Touch the [RTN] key to return to the previous screen. Displaying MP3 ID3-TAG titles Owner’s manual ID3 information such as title, artist and album title can be displayed for an MP3 file containing ID3 Tag information. Precautions when creating an MP3 disc ∗ ∗ Use to display current play status, and also as the cancel key. 4. To cancel play, touch the [T.SCN] ([T.RPT] or [T.RDM]) key.
Regarding MP3 folder creation Up to 8 folder levels (including the root directory) can be created for MP3 files (items 1 – in the illustration). However, on this unit, folders created above the third level will be converted to 2 levels. 1 2 3 1 4 2 3 4 • Folders containing no MP3 files are not recognized. • Only folders containing tracks (1 to 4 in illustration) are given numbers and displayed on the list. Pausing playback 1. Press the [s] button or touch the [s] key during playback. Playback pauses.
English DVD Video Player Operations 3. Touch the [w] or [z] key to select the track and touch the track name. Owner’s manual ∗ When the selected track’s “ ” mark is touched, the titles will scroll. Touch the [RTN] key to return to the folder select (LIST) screen. 4. Touch the [ESC] key. Playback by selecting a folder and track (Direct select mode) This operation allows searching using the folder and track numbers recorded on the MP3 disc. 1. Touch the [SRCH] key.
Notes regarding use of Apple iPod • When using an iPod, after connecting the iPod to the connector, select the iPod mode by either pressing the [SOURCE] button, or by touching the iPod icon on the SOURCE menu. • After the iPod has been connected to this unit, the iPod’s buttons are disabled for operation. • When the iPod mode has been selected, a special iPod control screen is displayed different from the main menus for other modes.
English iPod Operations Owner’s manual [BROWSE] key Press to display the browse menu, allowing selections to be made from the item key (ARTISTS, ALBUMS, SONGS, GENRES, or COMPOSERS). When a track is selected from this menu, the icon turns orange. [2ZONE] key Touch continuously (for about 1 second or more) to switch the 2-ZONE function ON. (the icon turns orenge) Touch again to turn OFF. s] key [s Use to control playback and pause. [å], [∂] keys Use to perform track selection.
Touch desired artist name ➜ ALBUMS for that artist are displayed Touch desired album name ➜ SONGS on that album are displayed • • • • • • Then touch the desired SONG title to select. When you return to the iPod main menu after selecting a track, the [BROWSE] key icon will turn to orange. If you touch the [BROWSE] key again in this condition, the song title list will be displayed directly. At a list display menu, touching the [Å] key will cause the display to go back one menu.
English CD Changer Operations Owner’s manual Note: • When an optional DVD (CD) changer is connected through the CeNET cable, this unit controls all DVD (CD) changer functions. This unit can control a total of 2 changers (CD and/or DVD). When the panel is open: 1. Touch the [DISC], [TRACK], [ARTIST], or [USER] key to select the desired title. The selected titles except for the user title scroll once.
Switching to a next disc. (Disc Up function) Selecting with a track number ●Fast-forward Press and hold the [d] button for 1 second or longer. ∗ When the panel is open, the same operation is also available by using the [∂] key. ●Fast-backward Press and hold the [a] button for 1 second or longer. ∗ When the panel is open, the same operation is also available by using the [å] key. TOP function 1. Touch the [SRCH] key. 2. Touch the [0] ~ [9] key corresponding with the track you desired.
English Owner’s manual CD Changer Operations DVD Changer Operations * TRACK [REPEAT]; track repeat playback The repeat play cintinuously plays the current track. * DISC [REPEAT]; disc repeat playback After all tracks in the current disc have been played, the disc repeat play automatically replays the current disc over from the first track. * TRACK [RANDOM]; track random playback The random play selects and plays individual tracks on the disc in no particular order.
Seek tuning When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV requires a TV tuner. 1. Press the [BAND] button and select the desired TV band (TV1 or TV2). WARNING For your safety, the driver should not watch the TV or operate the controls while driving. Please note that watching and operating the TV while driving are prohibited by law in some countries.
English TV Operations Owner’s manual ●Step tuning: Press the [d] or [a] button to manually tune in a station. Notes: • The same operation can be performed by touching the screen to display the menu screen, then touching the [å] or [∂] key. • Manual tuning is cancelled if you do not operate the unit for 7 seconds longer. (∗Only when connecting the TTX7503z or TTX7504z with this unit) Recalling a preset station A total of 12 TV stations can be stored (6-TV1 and 6-TV2).
Setting the TV diver Entering titles ∗ This function is enabled only when the panel is open. ∗ Normally use the TV diver with the “ON” position. Titles up to 10 characters long can be stored in memory and displayed for Radio stations, CD, TV stations and CD changer. The numbers of titles that can be entered for each mode are as follows. You can change the reception setting for the TV antenna connected to the TV tuner. 1. Touch the screen to display the menu, then touch [SUB] key. 2.
English Other Functions Owner’s manual Title list play Changing over monitor display size You can display a list of titles, then select the CD track, disc or broadcast station to listen to from that list. ∗ This function is available only when the panel is open. Notes: • This function is not available while you are driving. • Switch to the VISUAL/DVD player(DVD video or video CD)/DVD changer/TV mode you see.
Internal amplifier cancel function ∗ The factory default setting is “OFF”. 1. Press the [ADJ] button. 2. Touch the [AUDIO EXT.] key. 3. Touch the [AMP CANCEL] key to select “ON” or “OFF”. ●OFF: Use with the internal amplifier. ●ON: Use with the external amplifier. 4. Touch the [ESC] key to return to the previous screen. Triggered audio mute for cellular telepones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. 5.
English 5.1 ch Surround Decoder Operations ●Dolby PL II CONTROL Owner’s manual ∗ This function is available only when the MUSIC MODE is selected for Dolby PL II. For setup details, see “Selecting the Dolby PL II (Dolby Pro Logic II) type.” 3-1. Touch the [Dolby PL II CONTROL] key to show the submenu. 3-2. Touch the [PANORAMA], [DIMENSION] or [CENTER WIDTH] key to select respective item. [PANORAMA]: Select the “ON” or “OFF”. “OFF” is the default value.
English 5.1 ch Surround Decoder Operations P.EQ mode DSF effect ON/OFF P.EQ effect ON/OFF ∗ The factory default setting is “OFF”. ∗ The factory default setting is “OFF”. 1. Press the [ADJ] button and touch the [AUDIO] key. 1. Press the [ADJ] button and touch the [AUDIO] key. 2. Touch the [STATUS] key. 3. Touch the [P.EQ] key to select “ON” and “OFF”. 4. Each time the [P.EQ] key is touched, the on and off statuses are switched alternately. 5. Touch the [RTN] key, [ESC] key, or press the [ADJ] button.
English 5.1 ch Surround Decoder Operations Setting and storing P.EQ Properties Owner’s manual 1. Press the [ADJ] button and touch the [AUDIO] key. 2. Touch the [P.EQ] key to show the P.EQ adjusting display. 3. Touch the key for the desirable type to select it. The P.EQ adjustment contents are as follows: ●SIGNAL ∗ The factory default setting is “P.NOISE”. This function selects “P. NOISE” or “MUSIC”. ●SPEAKER SELECT ∗ The factory default setting is “FRONT”.
Problem Cause English 12. IN CASE OF DIFFICULTY Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed. The microprocessor has malfunctioned due to noise, etc. Turn off the power and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Note: When the reset button is pressed, turn off the ACC power.
English Problem TV Owner’s manual 62 Cause Measure The image is not displayed. The parking brake is not pulled. Check that the parking brake is applied. The display is dark. The brightness control is too low. Adjust the brightness properly. The operating condition is not good. The temperature inside the vehicle may be 0˚C or less. Set to an appropriate temperature (25˚C or so) and check it again. The headlight of the vehicle is lit.
English 13. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. DVD PLAYER CD CHANGER Measure A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A CD is loaded upside-down inside the CD Eject the disc then reload it properly.
English FM Tuner LCD Monitor Owner’s manual 14. SPECIFICATIONS Frequency Range: 87.0 MHz to 108.
English VRX756VD Installation and Wire connection manual 1. 2. 3. 4. 5. 6. 7. 8. 9. BEFORE STARTING ............................................................... PACKAGE CONTENTS ........................................................... GENERAL CAUTIONS ............................................................ CAUTIONS ON INSTALLATION .............................................. INSTALLING THE MAIN UNIT ................................................. REMOVING THE MAIN UNIT ....................
English 3. GENERAL CAUTIONS Installation and Wire connection manual 1. Do not open the case. There are no user serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized CLARION service centre. 2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol, etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. 4. CAUTIONS ON INSTALLATION 1.
English 5. INSTALLING THE MAIN UNIT ■ Universal Mount Notes: 1) Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. 2) Fasten the front stopper securely to prevent the main unit from coming loose.
English ■ Fixed Mount (TOYOTA, NISSAN and other ISO/DIN equipped vehicles) Installation and Wire connection manual This unit is designed for fixed installation in the dashboard. If the vehicle is equipped with a factory-installed radio, install the main unit with the parts and screws marked (∗). (Figure 8) If the vehicle is not equipped with a factoryinstalled radio, obtain an installation kit to install the main unit in the following procedure. 1. Remove the screws from both side of the main unit.
pull the main unit out by the hook plate. (Insert both the right and left edges of the hook plate.) (Figure 9) Note: Keep the hook plate. You cannot remove the main unit without disengaging the hook plate. Instrument panel Universal mounting bracket 2-Hook plate Main Unit Spring Outer escutcheon A B Figure 9 7. CAUTIONS ON WIRING 1. Be sure to turn the power off before wiring. 2. Be particularly careful where you route the wires. Keep them well away from the engine, and exhaust pipe, etc.
English 8.
English Installation and Wire connection manual Yellow +12V main power Black Ground Purple Purple/Black Grass-green al (∗2) Glay Rear right Parking brake Front right + Glay/Black al (∗2) Rear right + White White/Black Green Green/Black Blue/White Front right Front left + Front left Rear left + Rear left Amplifier turn-on lead Orange/White Illumination Red +12V accessory Brawn Phone mute (∗1) Blue Auto antenna VRX756VD +VRX756VD-065-Eng-Inst 71 05.1.
English ■ Connecting the Accessories • Connection to the external amplifier The external amplifier can be connected unless the 5.1ch Surround Decoder is connected. For detailed information, refer to the instruction manual of the 5.1ch Surround Decoder. Installation and Wire connection manual • Connection to the CCD camera for vehicle The CCD camera for vehicle can be connected to CCD terminal on the tuner amp unit. For detailed information, refer to the instruction sheet or manual for the CCD camera.
English 9.
English ■ Sample System 2 VRX756VD RCA cable (sold separately) Installation and Wire connection manual VTR Visual input (Glay) Non fader output Front Speakers RCA video cable (included the TV tuner) RCA cable (sold separately) Rear Speakers 4-Channel Amplifier (APA4320) RCA cable (included the DVH940) CeNET cable (included the DVH940) RCA cable (sold separately) Center speaker built-in amplifier (SRK5) 5.
Owner’s manual & Installation manual VRX756VD AM/FM DVD VIDEO / VIDEO CD / CD / MP3 PLAYER / CD CHANGER CONTROLLER WITH 7" LC DISPLAY Clarion Co., Ltd. All Rights Reserved. Copyright © 2005: Clarion Co., Ltd. Printed in Japan / / / 2005/2 (Y·Y) +VRX756VD-001-cover 1 R QC-6822K 280-8207-00 05.1.