Owner’s manual & Installation manual NX700 2-DIN MEMORY NAVIGATION & DVD MULTIMEDIA STATION WITH 7-inch TOUCH PANEL CONTROL
CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www.clarion.com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you’ll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www.clarion.com to register your Clarion product. We have made product registration simple with our easy to use website. The registration form is short and easy to complete.
Thank you for purchasing the Clarion NX700. Please read this owner’s manual thoroughly before operating this equipment. After reading this manual, be sure to keep it handy for future reference. Check the contents of the enclosed warranty card and keep it carefully with this manual. The provided disc (CD-ROM manual) cannot be played back on this unit. English • • • • 1. FEATURES ....................................................................................................................
English 1. FEATURES Owner’s manual ■ Built in Bluetooth® hands-free calling ■ Compatible with iPod® and iPhone™ via USB ■ Sirf III GPS module with 20-channel receiver Expanding Systems Expanding audio features Sirius Tuner XM Mini-Tuner (via Translator Adapter sold separately) Expanding visual features Rear Vision Camera (CC2011/ CAA185) Rear Monitor 4-Channel Amplifier VTR etc.
About playing a DVD-R/RW or DVD+R/RW disc This DVD player can play the following discs: This player can play DVD-R/RW and DVD+R/RW discs previously recorded in DVD video format or format with MP3/WMA/AAC/DivX files. Playable discs This player cannot play DVD Audio, DVD-RAM, Video CDs, Photo CDs, etc.
Multi-sound function English DVD video can store up to 8 languages for one film; select the language of your preference. • The languages stored on the disc are indicated by the icon shown below. Owner’s manual Multi-angle function A DVD video that is filmed from multiple angles allows you to select the angle of choice. • The number of recorded angles is indicated by the icon shown below.
INFORMATION FOR USERS: Cleaning • Cleaning the cabinet Use a soft and dry cloth and gently wipe off the dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. Operation Panel/ Generalities For a longer service life, be sure to read the following cautions. • The operation panel will operate properly in a temperature range of 0 to 60°C. • Do not allow any liquids on the set from drinks, umbrellas, etc.
English About the Registered Marks, etc. Owner’s manual • This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. • Manufactured under license from Dolby Laboratories.
English [SRC] button • Press this button to display/hide the Source screen to switch the source mode. Owner’s manual Blink LED • When the Blink LED function is set to “On” from the System tab menu on the General screen, blinks when the ACC power is turned off. SD memory card slot • SD memory card function is available in the Navi mode. For more information about the SD memory card function, see your User Manual (for the Navi mode).
English Outline of Button and Touchkey Operation Turning the power on Owner’s manual NX700 Engine ON position System check The CeNET format utilized on this unit is provided with a system check function. When the system check function is performed under the following conditions, the power is automatically turned off. Once turn off the engine switch, then restart the engine again. • When power is first turned on after initial installation. • When an external device is connected or disconnected.
Tuner mode operation English (Source screen) Owner’s manual Switches the radio band. Selects Home/Travel modes. Seek tuning Manual tuning Preset ch. • Select desired station after selecting radio band.
DVD Video mode operation English (DVD Video mode screen) *2 (Source screen) Owner’s manual * Screen during DVD Video mode when automobile moving. (Options screen) (DVD top menu) *2 (Setup screen) Note: *2 If you do not touch the screen for about 7 seconds, all the keys on the screen will disappear. Touch the screen surface to redisplay them.
Adjusting the General settings English (Source or Mode screen) Owner’s manual (Settings screen) (General screen) (Display tab screen) (System tab screen) NX700 11
Adjusting the Audio settings English (Source or Mode screen) Owner’s manual (Settings screen) (Others tab screen) (Audio screen) (Beat EQ tab screen) (BAL/FAD tab screen) 12 NX700
Remote Control Unit English CR2025 battery ❏ Names of buttons Owner’s manual Signal transmitter Operating range: 30° in all directions Rear side [SUBTITLE] [AUDIO] [ANGLE] [TOP MENU] Rear cover [MENU] [E], [e], [T], [t] [ENT] [RETURN] [SOURCE] [BAND] [6] [–], [+] [R], [F] ❏ Inserting the Battery 1. Slide the rear cover in the direction of the arrow, and remove it. 2.
English [SOURCE] button • Press to switch the source modes such as Tuner mode, DVD mode, etc. (in any mode) * Only DVD, USB, and AUX modes are selectable when 2-Zone ON. Owner’s manual • Keep pressing more than 1 second to turn the 2-Zone function ON/OFF. (in any mode) [RETURN] button • Press to return to the previous screen while the DVD menu is being displayed. However, it may occur that this button operation dose not work on some discs. (in DVD Video mode) [BAND] button • Switches reception bands.
2. Touch the [Open/Close] key. The operation panel will be opened. English Adjusting the Volume Owner’s manual 1. Press the [VOL –]/[VOL +] buttons to adjust the volume. [VOL –]: Decreases the volume. [VOL +]: Increases the volume. • The volume level indicated in the display is in a range from 0 (min.) to 33 (max.). CAUTION CAUTION While driving, keep the volume level at which external sounds can be heard.
English Owner’s manual Adjusting the angle of the operation panel Turning the Audio OFF The angle of the operation panel can be adjusted in the range of 0° to 30° 1. Touch the [o (Eject)] key to display the Eject screen. 2. Repeat touching the [Tilt] key to adjust the angle of the operation panel. Every touching the [Tilt] key tilts the operation panel forward or backward. The adjusted angle is stored in memory.
Turning the monitor on 1. Touch the monitor screen. The monitor screen is turned on, and resumes the last screen. • You can also turn on the monitor by pressing the [SRC] button. Displaying the Clock Screen You can change the screen to display only the digital clock on a black screen. 1. Touch the clock display on most screens. The Clock screen is displayed. 2. To return to the current mode screen, touch the monitor screen. • Pressing the [SRC] button displays the Source screen.
English ❏ Setting a disc Owner’s manual 1. Touch the [o (Eject)] key to display the Eject screen. 2. Touch the [Open/Close] key. The operation panel will be opened. 3. Insert a disc into the center of the insertion slot with the label side facing up. The disc will automatically be drawn into the DVD player. After setting a disc The system will automatically be switched to the relevant source media mode according to the disc, and start playing back the disc.
CAUTION After connecting an USB device 1. Confirm that data transfer is not performed on the USB media device. For the method to confirm it, see the operation manual of your USB media device. 2. Remove the USB media device from the USB connector. CAUTION Be sure to disconnect the USB media device while the vehicle’s engine is running. Otherwise, it may result in loss or damage to data on the USB media device. Do not stop the engine when the USB media device is connected.
English Selecting a Media Source Changing the source mode 1. Press the [SRC] button to display the Source screen. Owner’s manual 2. Touch the desired Source key you wish to change to. The system is switched to the corresponding source media mode. Note: • The Source keys have no effect in the Tel mode. Touch the [[] key at top left of the Phone Menu screen to cancel the Tel mode; this will resume the last operation mode.
Setting the 2-Zone function • The factory default setting is OFF. 1. Press the [SRC] button to display the Source screen. 2. Touch the [2-Zone] tab to display the 2-Zone tab screen. The source keys for the Sub zone are displayed. 3. Touch the desired source key you wish to assign to the Sub zone. The 2-Zone function is turned on with the selected source mode assigned to the Sub zone. 4. Touch the [Back] key to return to the previous screen.
English Owner’s manual Seek tuning Manual memory 1. Touch the [Band] key to select the desired band (FM or AM). 2. Touch the [{ (Seek)] or [} (Seek)] key to automatically seek a station. • When touching the [{ (Seek)] key, the station is sought in the direction of higher frequencies. • When touching the [} (Seek)] key, the station is sought in the direction of lower frequencies. 1. Touch the [Home Travel] key to select the Home or Travel mode. 2.
❏ Changing the DVD System Settings ❏ Selecting the DVD Video mode Note: • If the Setup operation is performed in the middle of DVD video play, the disc will restart from beginning. Displaying the DVD Setup screen 1. Touch the screen to display the DVD Video mode screen. 2. Touch the [Options] key to display the Options menu. 3. Touch the [Setup] key to display the Setup screen. WARNING • Some videos may be recorded at a higher volume level than desired.
English ●When watching through a wide type of the rear monitor (16:9) Wide: Setting up the disc menu language • The factory default setting is “English”. 4-1. Touch the []] key of the Menu Language item. Owner’s manual 4-2. Touch the desired Language key you wish to set. 4-3. Touch the [Back] key. ●When watching through a conventional type of the rear monitor (4:3) Pan Scan: The leftmost and rightmost areas of the screen are cut off.
Setting up the country code LEVEL7 NC-17 (NO ONE 17 AND UNDER ADMITTED) LEVEL6 R (RESTRICTED) LEVEL4 PG-13 (PARENTS STRONGLY CAUTIONED) LEVEL3 PG (PARENTAL GUIDANCE SUGGESTED) LEVEL1 G (GENERAL AUDIENCES) 4-3. Touch the [ENT] key. Country code list: Country Input code Canada 6765 United States 8583 American Samoa 6583 Bermuda 6677 Puerto Rico 8082 St. Pierre and Miquelon 8077 Virgin Islands (U.S.
English Showing the DVD Video mode screen Owner’s manual The DVD Video mode screen is used to control the playback mode from the screen. 1. Touch the screen. The DVD Video mode screen is displayed. If you do not touch the screen for 7 seconds, the display will return to the playback screen. Selecting the screen size You can change the screen size to suit to the playback film. • The factory default setting is “Full Wide”. 1. Touch the screen to display the DVD Video mode screen. 2.
Key Pad Slow playback Fast forward and fast backward 1. Showing the DVD Video mode screen, touch and hold the [{ (Chapter)] or [} (Chapter)] key during playback. [{ (Chapter)] key: Fast forward [} (Chapter)] key: Fast backward The playback speed becomes 4-time faster at first and then 16-time faster 3 seconds later. Releasing the key resumes the normal speed playback. • No audio is reproduced during fast forward and fast backward operation.
English Searching with a chapter/title number Owner’s manual You can locate the beginning of a scene using the chapter numbers or title numbers recorded on the DVD video disc. • “Chapter” means a small segment to divide the “Title” (film) which is recorded on the disc. 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [Direct] key. The Key Pad screen appears. • You can specify the title number by touching the [Title] key. 3.
Displaying/hiding the playback status 1. Showing the DVD Video mode screen, touch the [Options] key. 2. Touch the [On] or [Off] key of the P.Time item during playback. 3. Touch the [Back] key to return to the previous screen. Playback status is displayed on the screen. Title number Chapter number Playback time T01 C0 0 1 00 : 00 : 19 This system is a CD TEXT compatible model, and supports the display of the DISC TITLE, TRACK TITLE, and TRACK ARTIST (or DISK ARTIST) of the CD TEXT.
English Owner’s manual Pausing playback Scrolling track titles 1. Touch the [p] key during playback. Playback pauses. 2. To resume playback, touch the [p] key. Playback resumes. When a title or name displayed on the screen is longer than the text area, you can confirm the entire text by scrolling it. 1. Displaying the text you wish to scroll, touch the text area. The text will scroll once. Skipping a track (searching) 1. Touch the [{ (Track)] or [} (Track)] key during playback.
Precautions when preparing a disc Tag information (track title, artist name, and album title) can be displayed for an MP3/WMA/ AAC file containing the Tag information. This system supports the ID3 TAG version 1.x/ 2.x and WMA-TAG. Note: • For details of the DivX file mentioned below, see “DivX Operations” (page 33). Precautions on the MP3/WMA/AAC files ●General precautions • Files other than MP3/WMA/AAC format cannot be played. In addition, some files may not be played because of the encoding settings.
English ❏ Selecting the MP3/WMA/AAC mode Owner’s manual 1. Set a disc which the MP3/WMA/AAC files are recorded to the DVD player. The system will automatically read the disc data, change to the DVD mode (MP3/WMA/ AAC mode), and start playback after a while. See also “Setting/Ejecting a Disc” (page 17). WARNING • Audio files may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal setting after playback has started.
Other various play functions When a title or name displayed on the screen is longer than the text area, you can confirm the entire text by scrolling it. 1. Displaying the text you wish to scroll, touch the text area. The text will scroll once. MP3/WMA/AAC files can be stored together with DivX files in a disc or folder. You can select whether such discs are regarded as MP3/WMA/ AAC discs or as DivX discs. 1. Touch the [Options] key. 2.
English Owner’s manual • DivX VOD (Video-on Demand files) that have authorization data can also be played. These files must be authorized on your PC beforehand using the DivX Registration Code displayed on the System tab screen under the General screen (see page 49). • Set the Frame Size to 640 × 480 or 320 × 240 pixels. • Set the Frame Rate to 30 or 15 fps. • Add a file extension “.AVI”, “.avi”, “.DIVX”, or “.divx” using single byte characters.
Showing the DivX mode screen You can change the screen size to suit to the playback film. • The factory default setting is “Full Wide”. 1. Touch the screen to display the DivX mode screen. 2. Repeat touching the [Full Wide/Cinema/ Normal/Wide] key until your desired screen size is selected. • This key shows the current screen size setting. [Full Wide]: The image is expanded so that the rectangle of the image fits to the screen (16:9). The aspect ratio of the image may be changed.
Switching Subtitles English Owner’s manual You can switch the subtitle language if the current DivX file has one or more subtitles. 1. Showing the DivX mode screen, touch the [Options] key. 2. Touch the [Subtitle] key during playback or pause. Each time you touch the key, you can switch among the subtitle language. • The number of subtitles recorded may differ depending on the DivX file. • Depending on the DivX file, switching may be impossible. • It may take time to switch the subtitle language. 3.
Note: • The messages may vary depending on the XM tuners connected to this unit. ❏ Selecting a band 1. Touch the [Band] key to select a band. This changes the reception band as follows: • Sirius: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ... • XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ... Only channels that can be received are selected. Channels without broadcasts and channels not covered by the contract will be skipped. 1. Touch the [{ (Channel)] or [} (Channel)] key. The system will tune to the previous or next available channel.
English Owner’s manual ❏ Recalling a preset station ❏ Category Scan function A total of 18 Sirius stations and 18 XM stations can be stored (Sirius: 6-SR1, 6-SR2, and 6-SR3; XM: 6-XM1, 6-XM2, and 6-XM3). This allows you to store your favorite stations in memory for later recall. 1. Display the Preset Key screen by touching the [Preset Info] key. 2. Select the desired band by touching the [Band] key. 3. Touch the corresponding Preset key to recall the stored station.
❏ Controlling the iPod iPods can be connected by using the connection cable supplied with the iPod, but in this case, you can enjoy its audio sound only. To enjoy video movies stored in the iPod with video displaying them on this unit, it is required to use the special connection cable (CCA-723/CCA-748) separately sold.
English Owner’s manual Skipping a track (searching) Other various play functions 1. Touch the [{ (Track)] or [} (Track)] key during playback. Tracks are skipped, as many as the times the key is touched, and playback starts. • Touching the [{ (Track)] key starts playback from the beginning of the next track. • Touching the [} (Track)] key starts playback from the beginning of the current track. When this key is kept touching, playback starts from the beginning of the previous track. 1.
[TV Shows]: You can narrow the Seasons to be listed by specifying the Program title. [Video Podcasts]: You can narrow the Tracks to be listed by specifying the Video Podcast name. ●[Playlists] key The list of all the Playlists and Video Playlists stored in the iPod is displayed. ●[Music] key The following category keys are displayed. You can narrow the listed items by selecting these categories. • The category keys displayed may differ depending on the connected iPod.
English ❏ Viewing video data in the iPod (only for the iPod with video) Owner’s manual When you connect an iPod with video by using the optional connection cable, you can enjoy the video data stored in the iPod showing them on the operation panel of this unit (and the rear monitor if connected). WARNING • Some videos may be recorded at a higher volume level than desired. Increase the volume gradually from the minimal setting after the video has started.
●Notes on the folder structure • The folder hierarchy must be within 8 hierarchical levels. Otherwise, playback will be impossible. • The maximum allowable number of folders is 512 (including root directory and folders with no MP3/WMA/AAC file). • The maximum allowable number of files in a folder is 255. • You can store the MP3 files, WMA files, and AAC files together in a folder. ●Notes on the Tag titles The limitations on the Tag titles are same as those in the MP3/WMA/AAC modes.
English Owner’s manual ●When in the AV mode • Touch the [Map] key on the Source screen to switch to the Navi mode. • When the image interruption from the Navi arises, the screen will be changed to the Navi display. When the interruption is finished, the screen will return to the previous AV display. Note: • Depending on the distance to the next guidance point and the vehicle’s speed, the image interruption may continue until the next route guidance finishes.
Selecting the screen size 7. SYSTEM SETTINGS Audio Settings You can customize the various audio settings of this unit from the Audio screen. 1. Touch the [SET] key. The Settings screen appears. 2. Touch the [Audio] key. The Audio screen appears. 3. Touch the desired Tab key, and perform the adjustment. See the following sections for details. • In the following sections, only the details regarding adjustments are described, procedures to select items are skipped. 4.
English ❏ Setting the Beat EQ This system provides 4 types of sound tone adjustment functions. You can select desired function and adjust the effect level. • The factory default setting is “Off”. Owner’s manual 3-1. Touch the [Beat EQ] key to display the Beat EQ tab screen. 3-2. Touch the [BEQ1], [BEQ2], [BEQ3], [Custom], or [Off] key to select the function you wish to apply. [BEQ1]: The bass sound area is emphasized.
You can adjust the volume output to the Sub Woofer. • The factory default setting is “0”. 3-1. Touch the [Others] key to display the Others tab screen. 3-2. Touch the [–] or [+] key of the Sub Woofer Ctrl item to adjust the output level. Setting range: –6 to +6 ❏ Setting the Sub Woofer Phase You can reverse the phase of the Sub Woofer output signal. • The factory default setting is “Normal”. 3-1. Touch the [Others] key to display the Others tab screen. 3-2.
English ❏ Setting the Audio ATTenuation The audio output can be attenuated when a voice interrupt of the navigation system arises. • The factory default setting is “High”. Owner’s manual 3-1. Touch the [Others] key to display the Others tab screen. 3-2. Touch the [}] key to display the next screen. 3-3. Touch the [[] or []] key of the Audio ATT item to set the volume level when a voice interrupt arises.
❏ Performing the System Check The sound heard when you make operations is called “beep”. The system can be set so that it does not produce this beep sound. • The factory default setting is “On”. You can perform the system check by the following operation. 3-2. Touch the [}] key to display the next screen. 3-2. Touch the [On] or [Off] key of the Beep item to turn the Beep function on or off. 3-3. Touch the []] key of the System Check item. The System Check screen is displayed.
English ❏ Setting the anti-theft function (CATS) Owner’s manual “CATS” is the acronym of “Clarion Anti-Theft System”. When you set a PIN code (called as “Personal Code”), a theft is prevented by disabling the operation of the unit at the theft. In addition, set the Blink LED function to improve the effect of the CATS function (see page 49). Setting your Personal Code 3-1. Touch the [System] key to display the System tab screen. 3-2. Touch the [}] key to display the next screen. 3-3.
Adjusting the Monitor You can customize the various monitor settings by the following operations. ❏ Adjusting the Dimmer, Bright, Color, Contrast, and Hue level Note: • The Bright, Color, Contrast, and Hue settings can be adjusted only when a video image is displayed on the screen, and the car is stopped with applying the parking brake. • The Hue setting can be adjusted only when the NTSC mode is selected. • The navigation screen has own dimmer setting separately from the AV screen.
English 8. TROUBLESHOOTING If you have a problem with this system, check the following items to resolve it. See also our homepage (www.clarion.com) for additional information. Owner’s manual General Problem Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Nothing happens when buttons are pressed.
DVD Player Measure Another disc is already loaded. Eject the disc before loading the new one. There is a foreign matter already in place. Eject the foreign matter forcibly. Disc is dirty. Clean the disc with a soft cloth. Owner’s manual Sound skips or is noisy. Cause English Problem Disc cannot be loaded. Disc is heavily scratched or Replace with a disc with no scratches. warped. MP3/WMA/AAC files are not encoded properly. Use MP3/WMA/AAC files encoded properly.
USB Devices English Problem USB device cannot be inserted. Owner’s manual USB device is not recognized. Cause Measure The USB device has been inserted with wrong direction. Reversing the connection direction of the USB device, try it again. The USB connector is broken. Replace with a new USB device. The USB device is damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device. Connectors are loose.
USB Devices Cause Measure The connected USB device If the USB device is frozen, disconnect it, reset it, is not supported. and reconnect it again. Error 3 (USB memory) An error occurred when Disconnect the USB device, and reconnect it controlling the USB device. again. Error 3 (iPod) The selected category has no track data. Touch the [{ (Track)] key. If the error is not cleared, disconnect the iPod, and reconnect it again. The iPod is frozen. Disconnect the iPod, reset it, and reconnect it again.
Owner’s manual Frequency Range: 87.9 MHz to 107.
Installation Precautions WARNING Symbol Identification This manual uses symbols and icons to indicate safety precautions and concerns during the installation procedure. Be sure to carefully read and understand each precaution prior to beginning the installation. WARNING This symbol is intended to alert the user to the presence of important operating instructions. Failure to heed the instructions may result in severe injury or death.
Installation Notes English WARNING INSTALLATION MANUAL • Please note the position of pipes, tanks and electrical wirings before installing the unit into the vehicle; failure in avoiding these may cause a fire or malfunction. CAUTION CAUTION • Use only the supplied parts. If unspecified parts are used, they may cause damage. • Any holes made in the body of the vehicle should be sealed with a silicon adhesive. If exhaust fumes or water penetrates into the vehicle, this may cause an accident.
• Do not open the case. There are no userserviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center. • Prepare all articles necessary for installing the main unit before starting. • This model features an operation panel that slides forward. On some types of cars, the operation panel may make contact with the dashboard or gearshift lever, in which cause it cannot be installed.
English 5. INSTALLING THE MAIN UNIT INSTALLATION MANUAL This unit is designed for fixed installation in the dashboard. • When installing the main unit in NISSAN vehicles, use the parts attached to the unit and follow the instructions in Figure 6. When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle and follow the instructions in Figure 7. • Wire as shown in Section 10 (see page 65).
Installing the Main Unit in a TOYOTA Vehicle English Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.) INSTALLATION MANUAL Main Unit 8-Hexagonal screw (M5 × 8) Mounting bracket (1 pair for the left and right sides) Center Panel *2 *3 Figure 7 Note: *2 Some panel openings are too small for the unit depending on the vehicle type and model. In such a case, trim the upper and lower sides of the panel frame by about 0.5 to 1.
English 6. REMOVING THE MAIN UNIT When the main unit is to be removed, disassemble it in the reverse of the order in “INSTALLTING THE MAIN UNIT” (see page 60). 7. CAUTIONS ON WIRING INSTALLATION MANUAL • Be sure to turn the power off before wiring. Be particularly careful where you route the wires. • Keep them well away from the engine, and exhaust pipe, etc. Heat may damage the wires. • If the fuse should blow, check to see if the wiring is correct.
WARNING Note: • The supplied GPS antenna is for installing inside the vehicle. Do not install it outside the vehicle. • Install the GPS antenna more than 50 cm away from the main unit, other audio devices such as CD player, and a radar detector. If it is installed near these devices, GPS reception may be impaired. • To improve the GPS signal reception, install the GPS antenna horizontally on a flat plane. • Do not wax or paint the cover of the GPS antenna.
English 9. MICROPHONE ACCESSORY Note: • Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction. In addition, if leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction.
iPod/iPhone Radio antenna jack Connection cable (included in your iPod/iPhone) Microphone GPS antenna or jack Steering wheel remote control terminal INSTALLATION MANUAL USB terminal English 10. WIRE CONNECTION iPod with video/iPhone Connection cable (CCA-723/CCA748) CeNET terminal Refer to the following page. Gray Black Purple Gray * Audio connection is required only when [Analog] is selected for the iPod output signal (page 42).
English Yellow Black Ground INSTALLATION MANUAL Yellow 3A Purple Purple/Black Red Gray Gray/Black White White/Black Brown Green Green/Black +12V main power CeNET bus backup Rear right + Rear right +12V accessory Front right + Front right Front left + Front left No connection Rear left + Rear left - Blue/White Amplifier turn-on cord Orange/White Blue Illumination Auto antenna Grass-green Parking brake cord Purple/white Reverse gear cord See next page for how to connect the parking brake cord.
Parking brake lamp + cord to battery Parking brake Electro-tap (sold separately) Parking brake signal cord ●How to attach the electro-tap 1. Place the Parking brake cord at the stopper, and fold it back in the direction of the arrow. 2. Pass the Parking brake signal cord through, and fold it back in the direction of the arrow.
Clarion Co., Ltd. All Rights Reserved.Copyright © 2010: Clarion Co., Ltd.
