Precautions: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
and access apps, while displaying the telephone and air conditioning screens. - You can enlarge the area you want to operate by touching the area. - You can switch from the full screen view to the four screen view by touching the cross point. - You can rearrange the areas of the Quad View. - Move the area you want to rearrange using the four screen view.
Functions of drive limitation is as follows: Prohibit the display of image and the play of USB video, the current video is automatically shifted from video mode to audio mode. Prohibit the dialing of phone number. Prohibit the viewing of short message. Prohibit equal four screens dragging of 2 sections shifting operation. Prohibit the setting of partial functions, such as Vehicle Settings,Bluetooth Settings, Device Connection etc.
Menu, long press again Home button to back into the screen before Main Menu. Short press, shift to 75% view or full view in clockwise sequence. ② Back Button - If the current view was full view or 75% view, then it went back to the previous menu.
- When Android Auto connected, the shifting sequence will be Radio→Android Auto Music; - When Apple CarPlay Auto is connected, the shifting sequence will be Radio→USB→Apple CarPlay Music; - When Apple CarPlay is connected (through USB), the shifting sequence will be Radio → USB → Apple CarPlay Music; ④ Audio Button Press down Audio button to enter into Audio Settings interface.
or enter into the program when cursor stays at; When Apple CarPlay/Android Auto full screen, press button is invalid. When it is 360° look around view, shift 360° look around view into as its 2D/3D model; Under standby, run the operation of turning on. - Long press: under turning on state, long press for 3s for standby; under turning off state, long press for 6s to reboot. -Rotary: Rotate clockwise to turn the volume up; rotate anticlockwise to turn the volume down.
1 Up, Down Button: under the mode of USB ( Music, Video, Picture)、iPod、Bluetooth Audio and Apple CarPlay Music, shift to play of previous/next file; Long press, fast track/fast reverse (except USB Picture). Under Radio mode, short press, present channel up/down; long press, seek up/down. 2 Volume Button: Volume adjustment 3 Mute button: Mute on or off.
- Short Press, enter into Bluetooth Phone Menu view, Apple CarPlay Phone or Android Phone view; under receiving phone call, short press to answer the call; under dialing or calling, short press to hang up. - Long press, when Apple CarPlay/Android Auto is connected, active Siri/VR; if Apple CarPlay is not connected, run the Wireless Apple CarPlay connection, display Apple CarPlay equipment registration view.
1-1 [A/C Menu]: Enter into A/C setup view 1-2 [A/C Max]: Fast refrigeration 1-3 Temperature regulation: Regulate the air temperature 1-4 Wind speed regulation: Regulate the wind speed of A/C. 2-1 [Source ]: Press to enter into media source view,shifting to play of media source or Audio OFF. 2-2 [Audio Settings]:Press and enter into Audio Setting View. 2-3 [Audio OFF]: Press Audio OFF, stop the play of Media. 3-1 [Settings]: Enter into Settings view 3-2 [Day/Night]: Shifting between day/night display mode.
3-3 [Display OFF]: Turn off screen display; press again display, press any button on central control panel or press the Mute button or VR/Phone button on steering wheel to turn on the display screen. 3-4 [360° Camera]: it is 360° look around image system. (suitable for Tiannium Plus model car) 4-1 [Phone]: When Apple CarPlay is not connected, shift to Bluetooth phone menu view; when Apple CarPlay is connected, shift to Apple CarPlay phone view.
1 Reinforce the Gain Value of Volume automatically based on the vehicle speed. 2 Replenish the high pitch and bass base on the Volume levels. 3 Press [Reset] button to resume to factory settings of Audio Settings. TOOL View Clock,mute sign are shown on TOOL view; When connecting with Bluetooth, Bluetooth sign and signal strength of hand phone is shown. ① Press to shift the screen between day and night model. ② Press to enter into view setup.
③ Press to turn off the monitor. ④ Press to enter into 360° look around video system. (Suitable for Titanium Plus model of car). ⑤ Showing the current connection status of Modem, press to enter into view of Modem. (Only for Brazil) Settings Under Main Menu, press [Settings] to enter into the configuration of view, total 2 pages. 1 [Vehicle Settings]:car information is shown, for configuration of car safety, car body and atmosphere light.
devices name can be changed. 3 [Apple CarPlay Settings]:wireless connection, choose or delete connection Apple CarPlay devices. 4 [Android Auto Settings]:Configure Use Android Auto as on state or off state. When it is on, automatically use Android Auto when connecting Android Auto mobile phone. 5 [Select Language]:the system language can be set as Brazil Portugal language, Mexican Spanish language or English.
off. 10 [Modem]:Showing the vehicle data or location is under sharing or not, when the vehicle is under location sharing, Modem reset is allowed. (Only for Brazil). 11 [Instruction Manual]:Viewing the manual book of the vehicle. 12 [Others]:Press to enter into setup of others, following functions are allowed: -Resume to factory configuration: to setup the device to default setting -Unit setting: the unit of Millage, temperature, pressure and average fuel consumption can be set.
Bluetooth Settings Press [Bluetooth Settings] under Settings view and enter into Bluetooth Settings. The Bluetooth can be turned on and off, Bluetooth connection and change name of Bluetooth. Notes: When the device is under Android Auto or Apple CarPlay, [Bluetooth] and [Device Connection] button are invalid. Device Connection Under the view of Bluetooth Settings, press [Device Connection] to enter into the view of Device Connection, new Bluetooth device can be matched, connected or deleted.
1. Press “Add New”,Pair Device view is shown, from your Bluetooth set up menu, look for “Ford Territory” to pair. 2. After successfully matched, press “End”button to return to connecting view, the matched devices will be shown on the lists. The Bluetooth device which is connected will be marked with “✅”. 3. Press “☆” button besides the device, customers can add the favorites here.
paired. Phone Menu On Main Menu, press [Phone] to enter into telephone menu view, when mobile phone is connected, you can check the dialing history, dialing, phone number book, short message, equipment connections and configuration of telephone. At the end of the view, current connecting mobile phone is shown. 1 [Call History]:After entering into Call History view, phone number can be chosen for dialing. 2 [Dial Number]: Entering into Dial Number, you can directly enter the phone number to dial.
list, short message can be checked. 5 [Device Connection]: Press to enter into Device Connection view. 6 [Phone Settings]:(Ring volume and call volume), set the incoming call number show on/off and call history synchronization on/off. When call history synchronization is on, call history will be synchronized automatically when the mobile phone and the device is paired.
1 [Private]:Press to shift to private conversation mode, the voice of the other calling party is not transmitted by speaker. 2 [Mute]:Turn the speaker mute, shut off the transmission of voice. 3 [Dial Number]:On some occasion, phone number should be entered here. 4 Hang off button: end the current call. Media Play Shift of Media Source The Media Sources supports by the device includes: Radio, USB/iPod, Bluetooth Audio, Android Auto (music) , Apple CarPlay (music). Two ways of media sources shift.
After entered into Media Source view, you can shift the media source, also you can press Audio OFF key to turn off the play of media. ■Shift by press the down key Press the key [Media] on Center control panel. Listening to Radio The tuner in this head unit contains RBDS (Radio Broadcast Data System) in FM band. ① Radio information view: Based on the previous radios you have listened, the preset radio number, radio frequency, stereo indicator, PS name, PTY name and Radio Text are shown.
the radio frequency. ④ Option key:Press to enter into the view of Option, Auto Store function is active. It will automatically search for the top 12 or 18 most strong signal radios and preset in the radio list. ⑤ [◀], [▶]: Press to manually tune up/down. ⑥ Up, Down key:Press to automatically seek up/down ⑦ Preset Channel List:short press every preset radio key, listen to the selected preset radio. Long press to preset radio key, the current frequency radio will be preset.
folder, maximum 255 files is allowed, the maximum total files is 8000, 2GM maximum audio file is allowed. (2) iPod: iPod, iPhone etc. (3) Bluetooth Audio: Bluetooth 4.2;HFP 1.7; A2DP 1.3; AVRCP 1.6; PBAP 1.2. ■The compatible media type Mass storage files in the USB can be played, including audio, video, pictures etc. - Pictures: JPG/BMP/PNG. - Audio: MP3/WMA/AAC/WAV/FLAC/AACLC/HEAC/WMA10Std. - Compressed Video: MKV/AVI/MOV/M4V/MPEG( MPG/MPE)/MP4/MPEG2/MPEG4 /H.264/WMV/FLV.
① Current paly media type. ② Song information area: Based on the song data, the name of the song, SN of the tracks/total numbers of tracks (USB/iPod mode), theme name, singer and album cover of theme will be shown. Under Bluetooth Audio mode, current connected Bluetooth name is shown. ③ Repeat button- Press to play single file repeatedly or shift between folders ④ Random button- press to shift between random on /off.
⑥ Up, Down button- press to jump to previous track/next track; long press to forward/backward. ⑦ Play/Pause button- press to pause or play ⑧ List button: under USB/iPod mode, press to open all current play media category list ( for the first time use, enter into all the tracks song name.), from the list, you can select according to category, play any tracks or category. Under the list, press Search sign on the upper left, you can type text to do the file searching.
sound of the video can be heard. ① Video information- shows the name of the video under playing and video number/total files. ② Progress bar – drag the progress bar to quickly shift to current video play. ③ Play/Pause button- press play or pause. ④ Up, Down button- press to jump to previous video /next video; long press to forward/backward by 4 times speed.
video or picture playing. In this view, there are also pictures shift of video, the time of play can be set as on/off. ⑦ Audio Settings button- jump to sound setting view. ⑧ Source button- jump to media source to select view for shifting to media source. ⑨ Repeat Button- Press to repeatedly play single song or play songs in folders one by one. ⑩ Random button- press to shift between random on/ off. Picture Browse(USB) Press screen or operation function button, the below function button will be shown.
picture to play. ③ Option button- When there are both audio and video files are stored in USB, enter into Option view, press “Switch to Audio” or “Switch to Video” to shift to audio or video play. ④ [►] – press this button to enter into picture slide play. Each picture will show for 3 seconds, then automatically shift to next picture. Press this button, “||”is show; press again to exit slide play.
send or receive short message, music play or voice function. Compatible models: Android smartphone Compatible OS: Android OS over 5.0 Compatible Bluetooth protocol:HFP (Hands-Free Profile) Preparation - Set Android Auto under Android Auto Settings as on. -Using the Google Play in your Android smartphone to download and install Auto application. -Connect Android smartphone to the device USB by the equipped data line.
Connection by line or by wireless - Wire connection: connect your iPhone with the device USB interface by equipped dataline. -Wireless connection:Wireless connection or data transmission can be realized through bluetooth. The maximum of 5 Apple CarPlay and one fix line connection of Apple CarPlay are realized.
5、 6、 Pair successfully. Passkey pass. 7、 When active CaPlay is shown, press agree on your iPhone to run Apple CarPlay. 8、 When connection is successful, it automatically jumps to CarPaly view. ■ Run the Apple CarPlay Connect iPhone with the device, or under already connected state, press Apple CaPlay button on Menu. ■ Exit the Apple CarPlay Disconnect the iPhone with the device, then Apple CarPlay is exited.
model of cars. Vehicle Information Press [Vehicle Information] button under Vehicle Settings shown, you can check vehicle information here such as total mileage of car, fuel percentage left, range, average fuel consumption, tire pressure and temperature, driving time, average speed, maintenance mileage, driving mode etc. Vehicle Safety Settings Press “Vehicle Safety Settings” button under Vehicle Settings shown, you can enter into vehicle safety view. Here you can set safety reminder during driving.
set namely high, medium and low, customer can set based on their desire on sensivity. 3、 AEB (Autonomous Emergency Braking):When radar detects a collide possibility, it prompts and assist driving to give enough brake. If no brake is done by driver, it automatically starts the emergency braking, in this way, collide or collide speed is avoided or reduced. It is in on state during driving.
2、 Courtesy Lamp: Once the complete vehicle is unlocked, the timer for indoor ceiling lamp, background light, small light, atmosphere light can be set, three options are possible, namely 0 Seconds,15 Seconds,30 Seconds. 3、 Room Lamp: When it is set to be Off, the indoor lamp will not be turned off immediately, after a while, it turned off automatically, energy saving is done. This setting can be set as a delayed mode, such as 5 Minutes,10 Minutes,15 Minutes.
windows to be opened by one push on the key. 8、 Smart Lock:it is unlock when nearing or unlock when leaving car. When the key is nearing car or to a certain distance, the car will be unlock automatically; When key is away from car for a certain distant, the car will be locked automatically. 9、Wireless Charge: it can turn on or off the function of wireless charging. Ambient Lighting Settings Under Vehicle Settings view, press “Ambient Lighting Settings” to enter into atmosphere lamp setup.
① Temperature regulation ② A/C switch ③ front defrost switch ④ rear defrost switch ⑤ A/C foot blowing switch ⑥ A/C face blowing switch ⑦ A/C ON/OFF switch ⑧ A/C MAX switch: quick A/C ⑨ ndoor/outdoor circulation switch ⑩ Wind volume regulation switch ⑪ Auto button: Automatically A/C switch ⑫ Driver seat Heat Control ⑬ Driver Seat Cool Control ⑭ Passenger Seat Cool Control ⑮ Passenger Seat Heat Control 36
RVC function (For Trend or Trend + model of cars RVC (Rear View Camera) is a back car assistant function which shifts to rear camera when backing the car. Once the electric door is functioning and car shift to rear shift steadily, rear camera view and radar detected information is shown on screen. Four areas individually are: left edge angel, left middle, right middle, right edge angle will be detected by radar.
and car speed is ≥20km/h, 360°look around image is turn off, when the car speed is ≤15km/h, 360°look around image to turn on. Turned off of 360°look around image Under the following circumstances, the 360°look around image can be turned off. Power is shifted to non ON mode. After entering into 360°look around image view and under non R gear, car speed is ≥20km/h Press 360°look around image exit button and the gear is not under R shift. The gear is from non P shift to P shift.