User guide

ManualsBrandsClarion ManualsDVD PlayerNX509E

Sync Tool

for Clarion NX700/NX509/NP509 Series

User Guide

1 Introduction

The Sync Tool is a downloadable application that enables you to update the navigation software, maps

and other content included in the following Clarion products:

• NX700E

• NX509E

• NP509E

• MMES T-01

It must be used in combination with the online update service provided by Naviextras and its Toolbox

PC-tool.

2 Before you start

Before using Sync Tool, you will need the following:

• You will need a PC equipped with:

 Microsoft Windows

® operating system (Windows XP Service Pack 2, Windows Vista 32-

bit versions or Windows 7)

 Internet connection

 SD card reader

• You will need an empty SD card formatted to FAT32 file system, with a capacity of at least 1 GB,

preferably 2 GB, depending on the size of the update data.

3 Step by step instructions

3.1 Downloading the Toolbox PC-tool and Sync Tool

1. Download and install the Toolbox PC-tool on your PC.

Detailed instructions:

v2.1 February 2013

Summary of content (5 pages)

PAGE 1
Sync Tool for Clarion NX700/NX509/NP509 Series User Guide 1 Introduction The Sync Tool is a downloadable application that enables you to update the navigation software, maps and other content included in the following Clarion products: • NX700E • NX509E • NP509E • MMES T-01 It must be used in combination with the online update service provided by Naviextras and its Toolbox PC-tool.
PAGE 2
a. Go to the http://clarion.naviextras.com website, and select your language in the top right corner. If you do not have a user account yet, create one now on http://clarion.naviextras.com. b. Click Downloads to access the download page. c. Follow the instructions on the site to download and install the Toolbox PC-tool on your PC. 2. Download the Sync Tool on your PC and store it on an SD card. Detailed instructions: a. Download the Sync Tool from https://clarion.naviextras.
PAGE 3
. Use the Toolbox PC-tool to download updates and to purchase additional extras at your convenience. For instructions on using Toolbox, see the Toolbox How-to Guides at http://clarion.naviextras.com/shop/portal/support. 4. Once the download is complete, disconnect the SD card reader from your PC and remove the SD card from the SD card reader. 3.4 Performing the update on your Clarion product IMPORTANT:  Do not switch off (power off) your clarion product during the following process.
PAGE 4
f. Wait until you receive the message ‘The navigation software is up to date’. When prompted, remove the SD card from your Clarion product. The navigation software restarts automatically. You are now ready to use the updated navigation software, maps and other content on your Clarion product. 4 Troubleshooting 4.1 Sync Tool does not start when I insert the SD card into the device. There might be two reasons for this:  The device started to read the SD card before launching the navigation software.
PAGE 5
4.5 Product Support Should you encounter any other problems, please contact the Naviextras support team on the http://clarion.naviextras.com/to/contactus website. v2.