QUICK START GUIDE & Installation Manual คู่มือการเริ่มต้นใช้งานด่วนและคู่มือติดตั้ง 快速入门指南 & 安装手册 PEDOMAN MULAI CEPAT & Petunjuk Pemasangan NX502A DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 6.2” TOUCH PANEL CONTROL เครื่องเล่น DVD มัลติมีเดีย พร้อมแผงควบคุมระบบสัมผัสและระบบนำ�ทางในตัวขนาด 6.2” 带内置导航及 6.
Contents English This guide is intended to guide you through the basic functions of the unit. Precautions........................................................................................................................... 2 Operational Panel................................................................................................................. 3 Turning the Power On..........................................................................................................
Operational Panel ALL ] ALL MENU [MIC] [ Disc Slot English [ Turning the Power On Start the engine. The power is supplied to this unit. ] EJECT RESET [ ] NAVI/AV Press [POWER/VOL] button on the panel to turn on the unit. [POWER/VOL] SD Card Slot Dummy SD card already inserted in this unit for prevent misinsertion of micro SD card. Please remove the dummy SD card before inserting SD card. .
English Source Media Modes Source Media Modes When you select the desired source mode (for example, the DVD Video, USB or iPod mode), the following screen will appear. During playback, touch the bottom half of screen to show operation bar. MP3/WMA Playback DVD Video mode 1. Play/Pause/Stop(long press) 2. Show cursor keys in DVD title menu 3. Previous chapter Fast-backward (long press) 4. Progress bar 5. Next chapter Fast-forward (long press) 6. Root menu Root Title (long press) 7.
Source Media Modes iPod ® Audio Playback Radio mode 1. 2. 3. 4. 5. 6. Show file list (Browse) Switch between iPod Audio and Video Song/Artist/Album information Play/Pause Repeat play Previous track Fast reverse (long press) 7. Progress bar 8. Next track Fast forward (long press) 9. Random play 10. Show other options 1. 2. 3. 4. 5. 6. 7. 11. Turn on / off Simple Control 12. Select Audiobook play speed 13. Back to main operation bar 11. Choose local or distant seeking mode 12.
English Bluetooth Operations Start using Clarion Mobile Map Pairing When Clarion Mobile Map is started the first time, you need to do the following: 1. Select the written language of the application interface. Later you can change it in Settings. 2. Select the language and speaker used for voice guidance messages. Later you can change it in Settings. 3. Read and accept the End User Licence Agreement. 4. Read and accept the road safety warning.
Installation Guide Map Screen Before Starting 12. To enlarge this small map and open the Map screen, tap [Show Map] button 13. Zooming in and out 14. Tilting up and down 15. Rotating left and right 16. 2D or 3D view 17. Compass in 2D map view mode 18. Compass in 3D map view mode 19. Location information 20. Return to normal navigation 21. Select destination Quick Menu 22. The Quick menu is a selection of controls and functions that are frequently needed during navigation.
English Installation Guide Installation Guide Installing The Main Unit Note: This unit is designed for fixed installation in the dashboard. 1. When installing the main unit in NISSAN vehicles, use the parts attached to the unit (see “ NISSAN”). When installing the main unit in TOYOTA vehicles, use the parts attached to the vehicle (see “ TOYOTA”). 2. Wire as shown in “Wire Connection”. 3. Reassemble and secure the unit in the dashboard and set the face panel and center panel.
Installation Guide NX502A Installation Guide Wire Connection GPS Antenna Antenna (Black) WARNING • Do not install the GPS antenna in a place where it may interfere with the operation of the airbag or hinder the driver’s visual range. • Do not use the navigation system with the GPS antenna cord cut off. The power cables in the cord may be short-circuited.
Installation Guide Installation Guide English Note: 18-Pin Connector Extension Lead (attached to the source unit) Gray Front Right Gray/Black White Brown wire (Phone mute lead) Connect to cellular phone mute lead. Front Left *1 Connect to the AUX audio input terminal and the iPod video input terminal. (Audio connection is required only when [Analog] is selected for the iPod output signal. See Owner’s Manual.
Clarion Co., Ltd. All Rights Reserved. Copyright © 2012: Clarion Co., Ltd.