Installation / Owner's manual Installation / Instalaci6n / Manual del usuario EAIZ76 CeNET iPod® INTERFACE INTERFAZ iPod®CeNET , o 11\\ clarion CeNET iPod® interface EAIZ76 iPod • CeNET • ~NET
Contents 1. INTRODUCTION 2. CAUTION 3 ." 3 3. CONNECTION 4 4. INSTALLATION 5 Using Velcro or Double-Sided Tape Using Screws 5. iPod CONNECTION 5 5 6 Start-up Disconnecting 6 6 6. MAIN FEATURES 6 Playback Playlist 6 ·8 7. COMPATIBLE iPod MODELS 8 8. CHANGING SOURCES FROM iPod MODE 8 9. ERROR CODES 8 10. SPECIFICATIONS 9 11. IDENTIFICATION OF PARTS 9 iPod is for legal or rightholder-authorized copying only. Don't steal music. iPod is a trademark of Apple Computer, Inc.
The Clarion EA1276, CeNET iPod interface adapter, simulates the iPod features and functionality to a compatible main unit. The main unit will be able to display Playlists, Artists, Albums, Songs, Genres, or Composers during playback. For a list of compatible main unit with the EA1276, please contact your local Clarion dealer or www. clarion.com. Please check your iPod Owner's Manual for the operating temperatures, as leaving iPod in your vehicle may cause damage due to temperature variations and moisture.
Please consult your nearest Clarion dealer before attempting to connect EA1276 to your main unit and iPod. Improper connection might damage your main unit, EA1276 , iPod, or your vehicle wiring. Please make sure the Yellow wire (Bus power lead) is connected on the CeNET compatible Main Unit (This wire usually has a 3 Amp Fuse inserted) connects to battery. If this wire is not connected, the iPod interface will not function.
There are no moving parts in EA1276. However, caution must be taken to ensure minimum damage to the unit. Do not press, puncture or drop the unit at anytime. Install the unit where there is no direct sunlight, away from vents or high moisture areas and away from other vehicle electronic components. Mount EA1276 away from moving parts in the vehicle. Using Velcro or Double-Sided Tape Stick velcro or Doble-sided tape to the EA1276.
After connecting your iPod to the EA1276, the iPod display will change to the following: iPod ~ clarion OK to disconnect To start iPod operations, change the main unit mode to iPod mode. Playback will start automatically from the last position of the iPod. The display changes from: CONNECT --7 Start Playing It will display current track and total tracks available in the current category. If the iPod is not connected, the main unit will display "No iPod".
Supported Operation • ALBUMS Here are the operations supported by EA1276 and controlled through the main unit. • SONGS • iPod Menu mode • COMPOSER • Category Direct Each category will have its own submenu. Please refer to iPod owner's manual for each category description and structure.
Playlist When iPod is connected to EA1276 and main unit, main unit will search for available playlist. The EA 1276 simulates the iPod features and functionality to a compatible main unit. Therefore, it can support all the playlists in the iPod. Note: Please refer Acceptable playlist for more information. Changing playlist Playback will start from the first song of the selected playlist when next/previous playlist function is performed.
General Power Supply Voltage: 14 V DC, negative ground Current Consumption: Less than 1 A Weight: 0.5 kg Dimensions (Figure 1): 100 mm (Width) x 30 mm (Height) x 110 mm (Depth) 110mm 100mm Figure 1 EA1276 Owner's manual CeNET cable (2.
Clarion Co., Ltd. All Rights Reserved. Copyright © 2006: Clarion Co., Ltd.
281-0624-00 2003/8 clarion" CLARION LIMITED WARRANTY For USA and Canada only If purchased from an authorized Clarion dealer, this product is warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase. Clarion ProAudio products, except for speakers, are covered by a two (2) year limited warranty when purchased from and installed by an authorized Clarion dealer.