manual Manuel d'utilisation Manual del usuario EA1251 CeNET iPod®INTERFACE INTERFAZ iPod®CeNET r 0 clarion Cel\lET IPod" inl:erf'ace EA'i!5' .. iPod ..
Contents 1. INTRODUCTION 3 2. CAUTION 3 3. CONNECTION 4 4. INSTALLATION Using Velcro or 2-Sided Tapes Using Screw 5 5 5 5. OPERATION Start-up Disconnecting Playback Playlist 6 6 6 6 8 6. TITLE DISPLAY 9 7. USABLE iPod MODELS 9 8. USER TITLE 9 9. CHANGING MODE FROM iPod TO OTHER 9 10. ERROR DISPLAYS 9 iPod is for legal or rightholder-authorized copying only. Don't steal music. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
The interface adapter for iPod® by Clarion, EA1251, works by simulating the iPod as a 6 Disc CeNET CD Changer. Please consult your main unit's Owner's Manual for CD Changer operations before beginning to use EA1251 . Clarion Multimedia Station of VRX series cannot control EA1251 through the KEY PAD screen or the list screen. If required so, please use the function buttons instead. Some EA1251 functions might not be available.
Please consult your nearest Clarion dealer before attempting to connect EA1251 to your main unit and iPod. Improper connection might damage your main unit, EA1251, iPod or your vehicle wiring. Please make sure the Yellow wire (Bus power lead) is connected on the CeNET compatible Main Unit (This wire usually has a 3 Amp Fuse inserted) connects to battery. If this wire is not connected, the iPod interface will not function.
There are no moving parts in EA1251. However, caution must be taken to make sure minimum damage to the unit. Do not press, puncture or drop the unit at anytime. Install the unit where there is no direct sunlight, away from air condition ducts or high moisture areas and away from other vehicle electronic components. Using Velcro or 2-Sided Tapes Stick velcro or 2-sided tapes to the unit.
After connecting your iPod to the EA1251, the iPod display will change to the following: iPod ~ To start iPod operations, change the main unit mode to CD Changer mode. Playback will start automatically. The display changes from: Disc Check -7 Disc Repeat -7 Start Playing Clarion If the iPod is not connected, the main unit will display "No Magazine". OK to disconnect The main unit is unable to detect the presence of iPod if the battery of the iPod is flat.
Song (Track) Up/Down Fast Forward/Fast Backward Press Track Up/Down button to jump from song to song. Press and hold Track Up/Down button for more than one second for Fast Forward or Fast Backward functions. Short press Track Down button jumps playback to the beginning of current song. Short press Track button twice within 2 to 3 seconds jumps playback to the beginning of previous song.
Direct search Playback position and setting Direct search from the main unit is possible, depending on the main unit features. Use the feature to select file or file from playlist directly. Playback position and setting will remain the same as long as the iPod stays connected to EA1251. If the iPod is disconnected, playback position will return to the default playback setting. Using Direct Search function, some limitations apply: • Only current title of the playlist (disc) can be displayed.
Some main unit models with CD-Text function have the capability to show CD-Text. When iPod is connected to these models, the following text will be displayed: • Artist Name as Artist Title (64 byte) • Song Name as Track Title (255 byte) • Album Name as Disc Title (64 byte) Long press Title button to change text as follows: User Title -7 Disc Title -7 Artist -7 Track Title ... • If there are more than 2 bytes of UTF8 data, EA1251 will change these to space character.
Clarion Co., Ltd. All Rights Reserved. Copyright©2005: Clarion Co., Ltd.