Ownerʼs manual / Manuel dʼutilisation Benutzer-Handbuch / Manuale utente Handleiding / Manual del usuario Bruksanvisning / Manual do proprietário CeNET iPod INTERFACE ® • • CeNET iPod INTERFACE • INTERFACCIA per iPod CeNET • CeNET iPod -INTERFACE • INTERFAZ iPod CeNET • CeNET iPod INTERFACE • INTERFACE CeNET iPod INTERFACE iPod CeNET ® ® ® ® ® ® ® Clarion Co., Ltd. All Rights Reserved. Copyright © 2005: Clarion Co., Ltd.
English Contents 1. INTRODUCTION ............................................................................................................................ 3 2. CAUTION ....................................................................................................................................... 3 3. CONNECTION ............................................................................................................................... 4 4. INSTALLATION ..........................................
The interface adapter for iPod ® by Clarion, EA1251, works by simulating the iPod as a 6 Disc CeNET CD Changer. Please consult your main unitʼs Ownerʼs Manual for CD Changer operations before beginning to use EA1251. Clarion Multimedia Station of VRX series cannot control EA1251 through the KEY PAD screen or the list screen. If required so, please use the function buttons instead. Some EA1251 functions might not be available.
English 3. CONNECTION Please consult your nearest Clarion dealer before attempting to connect EA1251 to your main unit and iPod. Improper connection might damage your main unit, EA1251, iPod or your vehicle wiring. Please make sure the Yellow wire (Bus power lead) is connected on the CeNET compatible Main Unit (This wire usually has a 3 Amp Fuse inserted) connects to battery. If this wire is not connected, the iPod interface will not function.
English 4. INSTALLATION There are no moving parts in EA1251. However, caution must be taken to ensure minimum damage to the unit. Do not press, puncture or drop the unit at anytime. Install the unit where there is no direct sunlight, away from vents or high moisture areas and away from other vehicle electronic components. Using Velcro or Double-Sided Tapes Stick velcro or Doble-sided tape to the unit.
English 5. OPERATION Start-up After connecting your iPod to the EA1251, the iPod display will change to the following: ���� ���������������� To start iPod operations, change the main unit mode to CD Changer mode. Playback will start automatically. The display changes from: Disc Check g Disc Repeat g Start Playing If the iPod is not connected, the main unit will display “No Magazine”. The main unit is unable to detect the presence of iPod if the battery of the iPod is flat.
Press Track Up/Down button to skip from song to song. Short press Track Down button restarts play of the current song. A short press Track button twice within 2 to 3 seconds restarts the previous song. If the last song is playing, by short press Track Up button, will enables playback to jump to the first song in the current disc. If the first song is playing, short press Track Down jumps to the last song in the current disc.
English Direct search Direct search from the main unit is possible, depending on the main unit features. Use the feature to select file or file from playlist directly. Using Direct Search function, some limitations apply: • Only current title of the playlist ( disc ) can be displayed. Other playlist titles might be displayed as “NO TITLE”, just blank. Playback position and setting Playback position and setting will remain the same as long as the iPod stays connected to EA1251.
Some main unit models with CD-Text function have the capability to show CD-Text. When iPod is connected to these models, the following text will be displayed: • Artist Name as Artist Title (64 byte) • Song Name as Track Title (255 byte) • Album Name as Disc Title (64 byte) A long press of Title button changes text as follows: User Title g Disc Title g Artist g Track Title … • If there are more than 2 bytes of UTF8 data, EA1251 will change these to space character.
English 11. SPECIFICATIONS General Power Supply Voltage: 14 V DC, negative ground Current Consumption: Less than 1 A Weight: 0.5 kg Dimensions (Figure 1): 100 mm (Width) x 30 mm (Height) x 110 mm (Depth) Note: Some of main unit may not display title properly. In this case, please press “DISPLAY” key and refresh TITLE display again. Figure 1 12. IDENTIFICATION OF PARTS EA1251 Ownerʼs manual CeNET cable (2.