Owner’s manual Mode d’emploi Manual de instrucciones AM/FM CD PLAYER WITH DVD/CD/MD CHANGER CONTROL • RADIO AM/FM-LECTEUR CD AVEC COMMANDE DE CHANGEUR DVD/CD/MD • RADIO-REPRODUCTOR AM/FM DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DVD/DISCOS COMPACTOS/ MINIDISCOS Clarion Co., Ltd. All Rights Reserved. Copyright © 2002: Clarion Co., Ltd.
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, MD changer, AUX, DAB, DSP DVD, PHONE MUTE and TV tuner connected via the CeNET cable.
English Display Items Clock (Clock indication) etc. (Audio mode, FADER, BALANCE, etc. indications) Operation status indication Titles, PS names, PTYs, Clock, etc. are displays. Preset channel indication (1 to 6) Disc number indication (1 to 12) SIRIUS indication Stereo indication Loudness indication : BEQ indication (BEQ:Beat EQ) : Professional mode indication Function mode indication • The names of modes being selected, etc. are displayed.
English 5. REMOTE CONTROL Receiver for remote control unit Operating range: 30˚ in all directions Signal transmitter Remote control unit [FUNC] [ [ ],[ ] ] [ ],[ ] [BAND] [ISR] [MUTE] [DISP] [SCN] [RDM] [RPT] Inserting the Batteries 1.Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2.Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.
Mode Radio (DAB) CD/MD changer DVD changer CD Button TV [FUNC] Switches among radio, DAB, CD, DVD deck, CD/MD changer, DVD changer, TV, and AUX. [BAND] Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward.
English 6. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Attaching the DCP 1. Insert the DCP so that the A section on the right side of the DCP catches on the hook B on the unit. Removing the DCP 1. With the MOTORIZED FACE closed, turn off the power. 2. Press the [RELEASE] button to open the DCP. [RELEASE] button 2.
Basic Operations Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations English Setting the Beat EQ This unit are provided with 5 types of sound tone effects stored in memory. Select the one you prefer. ∗ The factory default setting is “USER CUSTOM”. Each time you press the [BEQ] button, the tone effect changes in the following order: “BASS BOOST” ➜ “IMPACT” ➜ “EXCITE” ➜ “USER CUSTOM” ➜ “TONE BYPASS” ➜ “BASS BOOST” ...
Basic Operations : 700Hz/1KHz/2KHz (The factory default setting is “1k”) MID Q : 1.5/2 (The factory default setting is “2”) 4. When the adfustment is complete, press the [A] button several times until the function mode is reached. Adjusting the TREBLE The treble gain and treble F (center frequency) can be adjusted as follows. 1. Press the [A] button and select “TREB ”. 2. Press the [a] or [d] button and select from “TREB ” ➜ “TREB ” ➜ “TREB ”. 3.
Radio Operations English FM reception Seek tuning ® For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. 1. Press the [BND] button and select the desired band (FM or AM). Changing the reception area This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.
Radio Operations CD Operations Loading a CD 1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. 1. Press the [Q] button. The MOTORIZED FACE opens. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
CD Operations English Ejecting a CD Scan play 1. Press the [Q] button. The MOTORIZED FACE opens and a CD ejects. “EJECT” appears in the display. The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. CAUTION Be careful not to get your fingers caught when opening and closing the MOTORIZED FACE. 2. Remove the CD and press the [Q] button to close the MOTORIZED FACE.
Operations Common to Each Mode Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows. Mode CD mode TV mode Number of titles 50 titles 15 titles CD changer mode DCZ625 connected CDC1255z connected Number of titles 100 titles 50 titles 1. Press the [FNC] button to select the mode you want to enter a title (CD, CD changer or TV). 2.
Operations Common to Each Mode English Adjusting the display contrast You can adjust the display contrast to match the angle of installation of the unit. ∗ The factory default setting is “8”. (Adjustment level: 1 to 18) 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select “CONTRAST”. 3. Turn the [ROTARY] knob clockwise or counterclockwise to adjust the contrast. 4.
Operations Common to Each Mode Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. Triggered audio mute for cellular telepones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. ∗ This function is not compatible with all cellular telephones.
English 8. OPERATIONS OF ACCESSORIES CD/MD Changer Operations CD/MD changer functions When an optional CD/MD changer is connected through the CeNET cable, this unit controls all CD/MD changer functions. This unit can control a total of 2 changers (MD and/or CD). Press the [FNC] button and select the CD(MD) changer mode to start play. If 2 CD(MD) changers are connected, press the [FNC] button to select the CD(MD) changer for play.
CD/MD Changer Operations Scan play ●Track-up 1. Press the [d] button to move ahead to the beginning of the next track. 2. Each time you press the [d] button, the track advances ahead to the beginning of the next track. ●Track-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track. Scan play locates and plays the first 10 seconds of each track on a disc automatically.
English CD/MD Changer Operations TV Operations Random play TV tuner functions Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RD] button. “RDM” lights in the display and random play begins. 2. To cancel random play, press the [RD] button again. “RDM” goes off from the display and normal play resumes.
TV Operations ∗ If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” lights in the display and manual tuning is now available. 2. Tune into a station. ●Quick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. ●Step tuning: Press the [a] or [d] button to manually tune in a station. Recalling a preset station A total of 12 TV stations can be stored (6-TV1 and 6-TV2).
DSP Operations English DSP control function If the DSP (DPH910), sold separately, is connected to this unit using the CeNET cable, all the functions of the DSP can be controlled. ] button returns to the ad6. Pressing the [ justment selection display. 7. Press the [T] button to return to the previous mode. DSF functions Selecting the easy mode or the professional mode There are 2 modes available in DPH910, STD mode and professional mode.
DSP Operations Note: • The adjustment made in standard mode is not reflected in the adjustment in professional mode. On the contrary, the adjustment made in professional mode is not reflected in the adjustment in easy mode. G.EQ effect ON/OFF While the “G.EQ” indication is lit in the display, the G.EQ effect is set to “ON”. 4. Turn the [ROTARY] knob clockwise or counterclockwise to make the adjustment. The adjustment range is from –6 to 6. 5.
DSP Operations English Selecting a sound field menu VSE effect ON/OFF 1. Press the [A] button and select “DSF”. “DSF” blinks in the display. 2. Press the [BND] button to select “BSC1” (basic-1) or “BSC2” (basic-2). “BSC1” or “BSC2” is displayed in the function mode indication in the display. 3. Press one of the [DIRECT] buttons and select the desired sound field menu. While the “VSE” indication is lit in the display, the VSE effect is set to “ON”.
DSP Operations P.EQ effect ON/OFF While the “P.EQ” indication is lit in the display, the P.EQ effect is set to “ON”. ∗ The factory default setting is “ON”. 1. Press the [A] button and select “P.EQ”. 2. Press the [D] button. “P.EQ” in the display is changed from blinking to lit or unlit. ∗ When “P.EQ” is unlit, the P.EQ effect is set to OFF. Note: • If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.
Digital Radio / DAB Operations English Seek tuning Manual memory 1. Press the [FNC] button to select the DAB mode. 2. Press and hold the [a] or [d] button for 1 second or longer. The main unit has a manual memory function for DAB programmes. Up to 18 programmes (6 programmes each) can be preset in the preset buttons. [M1], [M2] and [M3] 1. Press the [FNC] button to select DAB mode. 2. Press the [BND] button to select any one shown above. 3. Press the [a] or [d] button to select a desired programme. 4.
Digital Radio / DAB Operations In the INFO standby mode, when the selected announcement programme starts, the main unit switches to the selected announcement programme automatically. ●Setting the INFO standby mode If you press and hold the [ I ] button for 1 second or longer, “INFO” lights in the display and the main unit is set into the INFO standby mode until the selected announcement is broadcast. When the selected announcement broadcast starts, the announcement item appears in the display.
Digital Radio / DAB Operations English ● Searching for a TP station When “TP” is not lit, if you press the [ I ] button, “TA” in the display lights and the unit automatically receives a TP station. Note: • If a TP station is not received, the unit continues the search operation. Pressing the [ I ] button again goes off “TA” in the display and stops TP station searching. PTY This function enables you to listen to the selected programme type, irrespective of the function mode.
Digital Radio / DAB Operations DVD Operations Operation 1. When you press the [RD] button, the PTY select mode is turned on. 2. Turn the [ROTARY] knob clockwise or counterclockwise to select the desired PTY. The 24 types of PTY below can be selected. 3. If you press and hold any one of the [DIRECT] buttons for 2 seconds or longer, the selected PTY is stored into that preset channel memory.
Problem General Power does not turn on. (No sound is produced.) Cause Measure Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shor- 1. Turn the unit off. ted to ground or excessive 2. Remove all wires attached to the power antencurrent is required for na lead.
English 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Measure ERROR 2 A CD is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A CD is loaded upside-down inside the CD deck and does not play.
36 DXZ825
FM Tuner Audio Frequency Range: 87.9 MHz to 107.
11.
11.
Memo/Mémo/Memorando 112 DXZ825