DXZ958RMC Owner’s manual Mode d’emploi Bedienungsnleitung Istruzioni per l’uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instalação DXZ958RMC CD/MP3/WMA Receiver / CeNET & Touch Panel Control / Music Catcher Récepteur CD/MP3/WMA/CeNET et écran de contrôle tactile/Music Catcher CD/MP3/WMA-Receiver /CeNET & Touch Panel Bedienfeld / Music Catcher Lettore CD/MP3/WMA / Comando pannello a tocco CeNET con Music Catcher CD/MP3/WMA Ontvanger /CeNET & Aanraakbedieningspaneel /Music Catcher
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DAB and TV tuner connected via the CeNET cable.
1. PRECAUTIONS ............................................................................................................................. . 3 Sloping Console .............................................................................................................................. 4 Handling Compact Discs ................................................................................................................ 4 2. CONTROLS ........................................................................
Sloping Console English This unit uses a SLOPING CONSOLE to make large screen displays possible. When you use the SLOPING CONSOLE, be sure to close it. CAUTION BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE. 1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key. If you switch OFF the ignition key with the SLOPING CONSOLE tilted, the SLOPING CONSOLE does not close. 2.
English 2. CONTROLS Main unit [Q] (OPEN/EJECT) [ADJ] Photo Sensor IR-Receiver [MODE] [ROTARY] [ ] (SOUND) [SRC] [TA] Display With the SLOPING CONSOLE opened [CD SLOT] DCP Detaching Slider DXZ958RMC +DXZ958RMC_01-02-Eng.p65 5 05.1.
English 3. NOMENCLATURE Names of the Buttons and their Functions IR-Receiver DCP Detaching Slider • Receiver for remote control unit. (Operating range: 30° in all directions) • Removes the DCP. [ADJ] button • Displays the various information that indicates the operating state of this unit such as tuning/ play state and indicators. • You can operate the display by touching or touching the surface. (cf. page 9) • Use this button to set or adjust the various settings in the adjust mode.
Operations when External Equipment is Connected to this Unit English ● When the CD/DVD changer is connected ∗ For details, see the section “CD changer operations” (cf. page 53). For the DVD changer, refer to the Owner’s Manual provided with the DVD changer. ● When the TV/DAB is connected ∗ For details, see the section “TV operations” (cf. page 56) or “Digital Radio/DAB operations” (cf. page 59). DXZ958RMC +DXZ958RMC_01-02-Eng.p65 7 05.1.
Touch Panel Buttons English ● Standard operation display Left slide button Right slide button ● Simple operation display (To switch to the simple operation display, press and hold the [MODE] button for 2 seconds or longer.) Left button 98.10 FM1 Right button P3 P.CH SEEK PRESET BAND 2:45 CT DISP PS/AS FM1 P.CH SEEK 98.10 Sub buttons PRESET Left slide button BAND PS/AS 2:45 CT DISP P3 Sub buttons • Touch this button for seek up/down or track up/ down operations.
Touch Panel Operations Touch Touch the display with your fingertip and take it away within 1 second. This is the most basic operation when operating the display. Touch Touch the display with your fingertip, and move your finger to the up ( ) or down ( ) with your fingertip still touching the display, and keep your fingertip on the display. The current operation continues for the time your fingertip is held on the display. This operation is used, for example, for fast-forwarding/fast-rewinding tracks.
English 4. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Attaching the DCP 1. Place the DCP to the SLOPING CONSOLE, adjusting the metal connecters on DCP and the SLOPING CONSOLE. 2. Press the DCP until it clicks into the SLOPING CONSOLE. Removing the DCP 1. Turn off the power. 2. Press the [Q] button to open the DCP. 3.
English 5. REMOTE CONTROL Receiver for remote control unit Operating range : 30° in all directions Signal transmitter Remote control unit [SRC] [BND] [ ] [ ], [ ] [a], [d] [MUTE] [TA] [PS/AS] [DISP] [PTY] [AF] Inserting the Battery 1. Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration. 2. Insert the battery (CR2025) into the insertion guides, with the printed side (+) facing upwards. 3.
English Functions of the Remote Control Unit Buttons Mode Radio (RDS)/DAB Button CD/MP3/WMA/ M.CATCHER CD changer DVD changer TV [SRC] Switches among radio, DAB tuner, CD/MP3/WMA, MC, CD changer, DVD changer, TV and AUX. [BND] Switches reception band. Returns to the first track. Moves the next disc in increasing order. Switches reception band. [ ],[ ] Increases and decreases volume (in all modes). [ ],[ ] Moves preset channels up and down. Moves tracks up and down.
English 6. OPERATIONS Basic Operations Speaker system CAUTION Be sure to lower the volume before switching the unit off or the ignition key. The unit remembers its last volume setting. If you switch the power OFF with the volume up, when you switch the power back ON, the sudden loud volume may hurt your hearing and damage the unit.
Basic Operations English Selecting a speaker system CODEMATIC function When this product is turned on for the first time, it allows you to select a speaker system. Choose your system in “SPEAKER SELECT” screen by following the procedure below. When “CODEMATIC” is set to “ON”, and the power is turned ON with the DCP attached, the Touch Code display appears. Touch the display in the order that was set in the adjust mode. 1. Touch the speaker system best suited to your car.
Basic Operations 2. Touch [COLOR]. DISPLAY EDIT P << 05 BGV TITLE SP/ANA D-BLUE AUTO COLOR SCROLL RTN ∗ The [COLOR] is displayed only when you choose wallpaper from P05 to P12. Switching the background 3. Touch on the left of the display to select [DAY] or [NIGHT]. 1. Touch [DISP]. COLOR SELECT 98.10 FM1 P3 PRESET BAND DARK BLUE 2:45 CT DISP PS/AS RTN ∗ DISPLAY EDIT screen displays. 2. Touch on the left of the display to choose the background.
Basic Operations English ●CD mode (MP3/WMA) 4. Touch [SENS] to select the sensitivity. DISPLAY EDIT P 1 05 BGV TITLE D-BLUE LOW COLOR SENS SPE/ANA RTN • You can choose from [HIGH], [MID], or [LOW]. 5. Touch [RTN]. Switching the title display You can display stored information such as disc titles or track titles when playing back music in CD, CD changer, or MUSIC CATCHER mode.
Radio Operations ● Standard operation display The standard operation display appears by pressing the [SRC] button and selecting the radio mode. Preset No. display Title display Reception Frequency band display display 98.10 FM1 P3 PS/AS Touching this starts a preset scan. Touching and holding this for 2 seconds or longer starts an auto store. Touching this during the preset scan/auto scan ends the operation. DISP The display contents can be changed. P.
Radio Operations English 1. Touch [BAND] to select the desired band (FM or AM (MW, LW)). 1. Touch [PRESET]. The preset memory No. list is displayed. 2. Tune into a station. ∗ If "MANU" is displayed, touch and hold [BAND] for 1 second or longer. Automatic tuning is possible when "SEEK" is displayed. ∗ If “TA” is lit in the display, TP stations are automatically sought. DX SEEK is touched on the frequency When display, automatic tuning starts.
Radio Operations English Preset scan Preset scan is a function for receiving stations in the order that they are currently stored to preset No. so that broadcasts can be checked. 1. Touch [PS/AS]. “P-SCAN” is displayed. ∗ The currently stored stations are received in order for 7 seconds or longer each. Stations with poor reception are skipped, and the next station is received. ■ To cancel preset scan 1. Touch [PS/AS].
RDS Operations English RDS (Radio Data System) AF function This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS), and can automatically switch to the broadcast station with the best reception as you move over long distances (AF switching). If a traffic announcement or programme type is broadcasted from an RDS station, this broadcast is received no matter what mode you are in.
RDS Operations When the REG function is ON, the optimum regional station can be received. When this function is OFF, the optimum station for that region is received if the regional station area switches as you drive. • The factory default setting is “OFF”. Notes: • This function is disabled when a national station such as BBC R2 is being received. • The REG function ON/OFF setting is valid when the AF function is ON. ■ To switch the REG function ON/OFF 1. Press the [MODE] button. 2. Touch [REG].
RDS Operations English Auto store function for TP stations Selecting PTY You can automatically store up to 6 TP stations to preset memory. If the number of TPs that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten. 2. Touch [PTY SELECT]. 1. Make sure that “TA” is displayed. If “TA” is not displayed, press the [TA] button to display “TA”. 2. Touch and hold [PS/AS] for 2 seconds or longer. “A-STORE” is displayed and the preset No.
RDS Operations DEUTSCH Nachrich Aktuell Service Sport Bildung Hör + Lit Kultur Wissen Unterh Pop Rock U-Musik L-Musik E-Musik - - Musik Wetter Wirtsch Kinder Soziales Religion Anruf Reise Freizeit Jazz Country Landes M Oldies Folklore Feature PTY item SVENSKA Nyheter Aktuellt Info Sport Utbildn Teater Kultur Vetenskp Underh Pop Rock Lättlyss L klass Klassisk Övrig m Väder Ekonomi För barn Socialt Andligt Telefon Resor Fritid Jazz Country Nation m Oldies Folkm Dokument FRANÇAIS Infos Magazine Services Spo
RDS Operations English Switching the PTY display language You can select one of 4 languages (English, German, Swedish or French) for the PTY displayed in the display. • The factory default setting is “ENGLISH”. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [TUNER]. 3. Touch on the left of the display to select “LANGUAGE”. ADJ TUNER LANGUAGE ENGLISH RTN 4. Touch on the right of the display to select the desired language.
CD/MP3/WMA Operations Touching this pauses or resumes play. ● Standard operation display The standard operation display appears by pressing the [SRC] button to select the CD/MP3 mode. Track No. display Title display MP3 (WMA) Folder No. display MP3 01 Don , DISP The display contents can be changed. a/d (only in the simple operation display) Touching these buttons selects the track to play. Touching and holding these buttons fastforwards or fast-rewinds tracks.
CD/MP3/WMA Operations English 2. When using Windows Media Player 9, click on TOOL ➜ OPTIONS ➜ MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility. Precautions when creating MP3/WMA disc ● Usable sampling rates and bit rates: 1. MP3: Sampling rate 11.025 kHz-48 kHz, Bit rate: 8 kbps-320 kbps / VBR 2. WMA: Bit rate 48 kbps-192 kbps ● File extensions 1.
CD/MP3/WMA Operations Pausing play ∗ No adapter is required to play an 8 cm CD. ∗ Insert the 8 cm CD into the center of the CD SLOT. 1. Touch [ English Loading 8 cm compact discs ]. ■ To resume play 1. Touch [ ] again. Backup eject function You can eject a disc by pressing the [Q] button even if the engine key or ACC is at the OFF position. CAUTION When the disc is ejected, press the [Q] button to close the control panel.
CD/MP3/WMA Operations English The operation of selecting the play list or tracks in the play list is the same as that of selecting a folder or tracks in a folder. ∗ Play list play is possible only when there is a file whose extension is “.M3U” on the CD-R/RW. ∗ Up to 5 play lists can be recognized, and up to 255 files can be recognized per play list. Top function The top function resets the CD player to the first track of the disc. 1. Touch [TOP]. Play starts from the first track (track No.1).
CD/MP3/WMA Operations English ■ To cancel folder repeat play 1. Press the [MODE] button. Random play This function allows you to play all tracks on the disc at random. When the disc contains 2 or more folders, all of the tracks in the folder are played at random, followed by all of the tracks in the next folder. This is repeated for all folders. 1. Press the [MODE] button. 2. Touch [TRACK RDM]. ■ To cancel random play 1. Press the [MODE] button.
MUSIC CATCHER Operations English The MUSIC CATCHER function allows you to record CD-DAs in the built-in flash memory. REC MODE HQ 01 Don , t Stop Be TRACK 01:01 REC 2:45 CT DISP TOP REC Setting a recording mode MUSIC CATCHER can be switched between 2 recording modes: • HQ (High Quality) MODE: about 266 minutes • LP (Long Play) MODE: about 354 minutes • The factory default setting is “HQ”. 1. Press the [MODE] button.
MUSIC CATCHER Operations Recording using MUSIC CATCHER is performed in the CD/MP3 mode and the following 2 recording modes are available: “TRACK REC” to record only one track currently being played back and “DISC REC” to record all tracks on the CD. ●TRACK REC 1. Press the [SRC] button to select the CD/MP3 mode. 2. Play back a track to be recorded, and touch [REC] to start recording. The “T-REC” indicator lights on the display. ∗ When recording is complete, “REC DONE” appears on the display. ●DISC REC 1.
Sound Adjustment English Adjustment items You can adjust a sound effect or tone quality to your preference. A speaker system is selected in the speaker select procedure (cf. page 14) when this product is turned on for the first time. The adjustment item depends on the speaker system. ● 3 WAY Anti Distortion Filter (ADF) .................... Page 32 SETTING Parametric Equalizer (P.EQ) .............. Page 33 Crossover (X-OVER) ........................ Page 34 Time Alignment (TIME ALIGN) .........
Sound Adjustment 5. Touch on the left of the display to select the desired item. Each touch of switches the adjustment item display as follows: ●Adjustment item (when USER is selected in step 3) BASS ➜ TREBLE ➜ COMP ➜ BASS... ●Adjustment item (when 1 to 3 is selected in step 3) LEVEL ➜ COMP ➜ LEVEL... 6. Touch on the right of the display to adjust the item. ∗ “BASS” and “TREBLE” can be adjusted within the range 1 to 13. ∗ “LEVEL” can be adjusted within the range 3 to +3.
Sound Adjustment English FREQUENCY (center frequency selection) Selects the frequency to be used as the center of the frequency band to be compensated from the range 20Hz to 20kHz. (1/3 octave steps, 31 points) GAIN (gain adjustment) Adjusts the gain (output level) within the range -12dB to +12dB. (1dB steps, 25 points) Q (Q curve selection) Sets one of 1, 3, 5, 7, or 20 as the sharpness of the Q curve.
Sound Adjustment 7. Repeat steps 4 to 6 to adjust each setting. 5. Touch on the right of the display to adjust the setting. ∗ The adjustment range is 0cm to 501.4cm in 2.3 cm steps. 6. Repeat steps 4 and 5 to adjust each item. 7. Touch [RTN]. ∗ You can store the settings. For details, see “Storing and recalling the SETTING adjustments” (page 36). SETTING–SP GAIN This function allows you to adjust the speaker output level. Adjust so that the volumes that are output from each speaker are well-balanced.
Sound Adjustment English SETTING–ALL SEAT ■ To initialize the adjustments The setting of “TIME ALIGN” and “SP GAIN” temporarily returns to the factory default setting. When the setting that is adjusted for the driver's seat returns to the factory default setting, a sound suitable for all seats is provided. You can initialize the adjustments for SETTING items. 1. Press the [SOUND] button. 3. Touch [ALL SEAT]. You can recall the stored adjustments for SETTING items. SETTING X-OVER TIME ALIGN 2.
Sound Adjustment Selecting the VSE menu The bass/treble mode can be adjusted only when the “SPEAKER SELECT” is set to “3 WAY”, “2 WAY”, or “NORMAL” (cf. page 14) and “EQ SELECT” is set to “BASS/TREB” (cf. page 48). • The factory default setting is “0”. 1. Press the [SOUND] button. VSE (Virtual Space Enhancer) allows you to compensate the sound pressure balance inside your car so that the same sound effect can be obtained whichever seat you are sitting in as proved in compensation simulations.
Sound Adjustment English Adjusting/storing VSE (user memory) Adjustment items ● DIFFUSE Adjusts the deviation in diffused sound pressure. ● CAR WIDTH Adjusts the deviation in sound pressure along the width of the car. ● CAR LENGTH Adjusts the deviation in sound pressure along the length of the car. 2. Touch [VSE]. SOUND 1 2 VSE P.EQ OFF OFF OFF 11. Touch and hold [USER] for 2 seconds or longer. You will hear a long beep, and the values you adjusted up to step 9 are stored to the VSE menu.
Sound Adjustment Speaker Mounting No. Display name position 1 SEDAN-1 Front: Front door Rear: Rear parcel 2 SEDAN-2 Front: Front door Rear: Rear door 3 MINI VAN-1 Front: Front door Rear: Luggage (side) 4 MINI VAN-2 Front: Front door Rear: Rear door 5 WAGON Front: Front door Rear: Luggage (side) 6 USER User preference 5. Press the [SOUND] button to return to the original mode. Adjusting/storing P.EQ (user memory) 1. Press the [SOUND] button. 2. Touch [P.EQ]. SETTING P.
Sound Adjustment English Notes: • The screen displayed in step 3 appears, with the title being accompanied by “✓” mark. Operation so far completes P.EQ adjustment. To continue to store the adjustment value to the P.EQ user menu, perform the following. 12. Touch [PRESET] to display the P.EQ menu list. 13. Touch and hold [USER] for 2 seconds or longer. You will hear a long beep, and the values you adjusted up to step 10 are stored to the P.EQ menu.
Sound Adjustment on the right of the display to 4. Touch adjust to the gain level. • “SP-GAIN” can be adjusted within the range -10dB to +10dB. ● SUB-W LPF (Subwoofer Low-Pass Filter) adjustment This filter cuts the signals above the selected frequency value. Each touch switches the frequency value as follows: THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz ➜ THROUGH... Select the frequency that suits your subwoofer. Set to “THROUGH” if you use powered subwoofers with built-in low-pass filters. 1. Press the [SOUND] button.
Sound Adjustment English Set the value to “0” to reproduce all center sound from the center speaker. Set the value to “7” to distribute all center sound to left/right front speakers, just like a normal stereo system. * “CTR WIDTH” is displayed only when “CENTER-SP” is set to “ON”. 4. Touching on the right of the display to adjust the delay time. • “SRD-SP” can be adjusted within the range 0ms to 15ms. 5. Press the [SOUND] button to return to the original mode. 1. Press the [SOUND] button. 2.
Common Operations The “TITLE INPUT” screen appears when you enter a title. Title TEXT FONT display display display TITLE INPUT Me I o d y a a-Z FONT TEXT / RTN 2. Touch [DISP]. 3. Touch [INPUT]. DISPLAY EDIT P << FOLDER00002 05 BGV TITLE AVIL.208:43 SP/ANA FONT display A : Capital alphabet letters a : Small alphabet letters 1 : Numbers U: Symbols Ā : Umlaut Number of titles 100 titles 100 titles 50 titles 1.
Common Operations English Clearing titles Changing settings 1. Either receive the TV station, or play a CD or MUSIC CATCHER file whose title you want to clear. Selecting setting items 2. Touch [DISP]. 1. Press the [ADJ] button. The mode changes to the adjust mode. ADJ 1 1 3. Touch [INPUT]. 4. Touch and hold [RTN] for 2 seconds or longer to erase the title. 5. Touch [MEMO]. ∗ Erasing is performed by overwriting with a blank title.
Common Operations Main item APPEARANCE SOUND TUNER SETTING Sub item MSG INFO • Setting the message display ON/OFF (cf. page 46) MSG INPUT • Message information input (cf. page 46) DIMMER IN • Auto-dimmer setting (cf. page 46) DMR LEVEL • Setting the dimmer level (cf. page 47) BRIGHT • Adjusting the display brightness (cf. page 47) BLINK LED • Making the LED blink when DCP is removed (cf. page 47) BEEP • Setting beep (cf. page 47) SCROLL SPD • Adjusting the scroll speed (cf.
Common Operations English Displaying messages (MSG INFO) This function allows you to display a message on the display when no operation is performed for more than 30 seconds. • The factory default setting is “OFF”. 1. Press the [ADJ] button to set to the adjust mode. 6. Touch on [FONT] to select the type of text. Each touch of switches the type of text. For details, see page 43. 7. Touch on [TEXT] to determine the character to enter. 8. Repeat steps 5 to 7 to enter the message. 2. Touch [APPEARANCE].
Common Operations Making the LED blink when DCP is removed (BLINK LED) This function allows you to set how much the displayed is to be dimmed. • The factory default setting is “3”. You can make the LED on this unit blink when the DCP is removed. • The factory default setting is “OFF”. 1. Press the [ADJ] button to set to the adjust mode. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select “DMR LEVEL”.
Common Operations English Adjusting the title scroll speed (SCROLL SPD) Selecting the equalizer (EQ SELECT) This feature allows you to slow down the scroll speed when the scroll speed is too fast, making it difficult to view the screen. • The factory default setting is “SPEED 1”. You can change the equalizer that adjusts the sound quality. • The factory default setting is “P.EQ”. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3.
Common Operations Set internal amplifier use ON/OFF matched to whether or not an external amplifier is used. Set AMP CANCEL to “ON” (internal amplifier use OFF) when an external amplifier is connected and the internal amplifier is not used. • The factory default setting is “OFF” (internal amplifier used). 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SOUND]. 3. Touch on the left of the display to select “AMP CANCEL”. 4. Touch on the right of the display to select “AUX” or “TEL”.
Common Operations English 3. Touch on the left of the display to select “TEL-SP”. ADJ SETTING TEL-SP MUTE: The sound from this unit is muted during telephone calls. 5. Press the [ADJ] button to return to the original mode. RIGHT RTN 4. Touch on the right of the display to select “LEFT” or “RIGHT”. LEFT: Telephone calls can be heard on the front left speaker connected to this unit. RIGHT: Telephone calls can be heard on the front right speaker connected to this unit. 5.
Common Operations This function allows you to perform a system check when an external equipment is connected to this unit or the “SPEAKER SELECT” is changed. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SETTING]. 3. Touch on the left of the display to select “SYSTEM CHECK”. ADJ SETTING SYSTEM CHECK [START] RTN 4. Touch [START]. The confirmation display appears. 2. Touch [SETTING]. 3. Touch on the left of the display to select “CODEMATIC”.
Common Operations English Setting the slide direction of the slide buttons (SLIDE CONT) This function allows you to set the direction of the left and right slide buttons. • The factory default setting is “UP ➜ +”. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [SETTING]. 3. Touch on the left of the display to select “SLIDE CONT”. ADJ SETTING SLIDE CONT UP RTN 4. Touch on the right of the display to select “UP ➜ +” or “DOWN ➜ +”. 5. Press the [ADJ] button to return to the original mode.
English 7. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer When an optional CD changer is connected through the CeNET cable, this unit can control CD changer operations. This unit can be connected to a total of 2 CeNET-wired CD changers. ■ When 2 CD changers are connected Press the [SRC] button to select the changer connected to this unit. (Each press of the [SRC] button switches the changer.
CD Changer Operations English Selecting the changer mode Fast-forward/fast-rewind 1. Press the [SRC] button to select the changer mode. ∗ Each time you press the [SRC] button, the display switches as follows: Radio ➜ (DAB) ➜ CD/MP3 ➜ M. CATCHER ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio... 1. To fast-forward, touch display. ∗ The mode of equipment that is not connected is not displayed. Play starts automatically when the mode changes to the changer mode. Pausing play 2.
CD Changer Operations English Disc repeat play After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is canceled. 1. Press the [MODE] button. 2. Touch [DISC RPT]. ■ To cancel disc repeat play 1. Press the [MODE] button. Random play Random play selects and plays individual tracks on the disc in no particular order.
TV Operations English TV tuner function When an optional TV tuner is connected through the CeNET cable, this unit controls all TV tuner functions. To watch TV, you need a TV tuner and a monitor. Screen displays in the TV mode ● Standard operation display The standard operation display appears by pressing the [SRC] button to select the TV mode. Reception Channel display band display Preset No. Title display display TV1 3ch MANU 2:45 CT PRESET BAND PS AS DISP DISP PRESET SEEK/MANU indicator P1 P.
TV Operations Preset memory Seek tuning is a function for automatically tuning stations with good reception. A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This allows you to select your favorite TV stations and store them in memory for later recall. 1. Touch and hold [BAND] for 1 second or longer while “MANU” is displayed. Automatic tuning is possible when “SEEK” is displayed. on the channel display. 2. Touch “SEEK UP/SEEK DOWN” is displayed, and tuning starts.
TV Operations English ■ To cancel the preset scan 1. Touch [PS/AS]. “P-SCAN” disappears, and the stations that were being received when [PS/AS] was touched are received next. 3. Touch on the left of the display to select [TV DIVER]. ADJ TUNER TV D I V E R ON RTN Watching a video The TV tuner has a VTR input terminal to which 1 external device can be connected. Connect a 12 V video cassette player (VCP) or video cassette recorder (VCR) to the TV tuner input terminal. 4.
Digital Radio / DAB Operations Switching programmes When a CeNET cable is used to connect a DAB (Optional, DAH913 or DAH923), all functions can be operated. 1. Press the [SRC] button to select the DAB mode. Listening to the DAB station 1. Press the [SRC] button to select the DAB mode. Notes: • The display shown in the normal reception mode and the preset reception mode is the same as that when a DAB station is received. • The number of programmes and broadcasting times depend on the DAB station.
Digital Radio / DAB Operations English Recalling a preset programme 1. Press the [SRC] button to select the DAB mode. 2. Touch [BAND]. Each touch of [BAND] changes the display in the following order: M1 ➜ M2 ➜ M3 ➜ M1... on the right of the display to 3. Touch recall a preset programme. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. • The factory default setting is “ON”.
Digital Radio / DAB Operations on the left of the display to 3. Touch select an information item. You can select any of 6 items: Travel ➜ Warning ➜ News ➜ Weather ➜ Event ➜ Special ➜ Travel... on the right of the display to 4. Touch select “ON” or “OFF”. Switching the PTY and INFO display language You can select one of 4 languages (English, German, Swedish or French) for the PTY and INFO shown in the display. • The factory default setting is “ENGLISH”.
Problem General English 8. IN CASE OF DIFFICULTY Cause Measure Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No audio when operating the unit with amplifiers. Amplifier turn-on lead is Turn the unit off and check each wire for a possible shorted to ground or short.
CD/MP3/WMA Cause Measure Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place. Let dry for about 1 hour with the power on. Wrong filename File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. File name or extension is not correct. Use alphanumeric/ASCII characters for MP3/WMA file name. Use “.M3U” for the file extension of a play list. Play list play is not performed.
English 9. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Measure ERROR 2 A DISC is caught inside the CD deck and is not ejected. This is a failure of CD deck’s mechanism and consult your store of purchase. ERROR 3 A DISC cannot be played due to scratches, etc. Replace with a non-scratched, non-warped-disc. ERROR 6 A DISC is loaded upside-down inside the CD deck and does not play.
Radio section Audio Tuning System: PLL synthesizer tuner Receiving Frequencies: FM : 87.5 to 108 MHz (0.05 MHz steps) MW : 531 to 1602 kHz (9 kHz steps) LW : 153 to 279 kHz (3 kHz steps) Output Power: 4 × 31 W (DIN 45324, +B=14.4 V) Continuous Average Power Output: 18 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD Bass Control Action (50 Hz): ±12 dB Treble Control Action (12.