CZ302 CD/USB/MP3/WMA RECEIVER
English Contents Thank you for purchasing this Clarion product. • Please fully read this owner’s manual before operating this equipment. • Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES........................................................................................................................ 3 2. PRECAUTIONS.................................................................................................................
Compatible with iPod® / iPhone® with PANDORA® internet radio App Front Panel Auxiliary Input and 4ch RCA Output with Subwoofer Control BEAT-EQ with 3 Band Parametric Equalizer and MAGNA BASS EX Dynamic Bass Enhancement Expanding Systems Expanding audio features 4 Channel Amplifier iPod/iPhone (Connect via CCA-748) USB Memory (Connect via CCA-755) Portable Player (Connect via AUX IN Jack) Bluetooth cellular phone Note: • T he items listed outside of the frames are the commercial products generally sol
English Cleaning the body CZ302 530-1710kHz 87.9-107.9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
[SRC / ] Button • Toggle the audio source • Power on / Power off (long press) Operational Panel [BAND] [MENU] Disc Slot [PS/AS] [ ] USB Connector [ , ] Buttons • Preset station up/down • Previous / next track • Search (long press) • Station up/down (PANDORA mode) [SCN/PS/AS] Button • Scan play / Preset scan • Auto memory store (long press) • Thumbs down (PANDORA mode) [ SRC / ] [OPEN] [ / ] [VOLUME] [DISP] [1~6] [ISR] AUX Jack Names of Buttons [ SRC / ] Button • Power / Toggle the audio
English 4. CAUTIONS ON HANDLING 5. OPERATIONS Handling Discs Basic Operations Storage • New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc. • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters.
In any mode, press and hold [DISP] button to enter system setup. Press [ ] or [ ] button to select options, rotate the [VOLUME] knob to adjust. CLOCK Press the [VOLUME] knob to enter clock setting mode, rotate the [VOLUME] knob to set clock, ] or [ ] button to select hour or press [ minute, press and hold the [VOLUME] knob to confirm. DX/LO (RADIO mode) Rotate the [VOLUME] knob to choose radio local or distant at RADIO mode. • LO: Only stations with strong signal can be received.
English Radio Operations Manual store When one expected radio station has been detected, press and hold number button 1-6 to store it in the memory. Recall the stored stations Press one numeric button among 1 to 6 on the panel to select the corresponding stored station. SiriusXM Satallite Radio Operations [ DISP ] button on the front panel, then ] button repeatedly until LO or press [ DX displays on the screen, and rotate the [volume] knob to select Local or Distant mode.
SiriusXM Satallite Radio Operations Receiving and Tuning to an Alert 1. When SiriusXM mode,select your favorite SiriusXM Channel. 2. Press and hold [ ] for at leadt 2 seconds. The channel you selected is stored as the jump Source. 3. Press and hold [ ] for at least 2 seconds to recall and tune to the saved jump Source channel. “CANNOT TAG” ,etc, may not be displayed.
English displayed as the title during MP3/WMA play but the title must be within 32 single byte alphabetical letters and numerals (including an extension). 3. Do not affix a name to a file inside a folder having the same name. • If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. or mark and • Discs without the CD-ROMs cannot be played by this unit. • Some CD-R/CD-RW discs may not be usable.
iPod & iPhone Operations 1. Open the cover of the USB connector to the right. Insert a USB cable (CCA-755) into the USB connector. Insert a USB device into the USB cable. When connecting a USB device, the unit will read the files automatically. 2. To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device. Open the cover to the left. 3. Operation is same as MP3/WMA operation.
English iPod & iPhone Operations Thumbs up/down 1. Press the [ 6 ] button on the panel or the [RDM] button on the remote control for the thumbs up. 2. Press the [ 5 ] button on the panel or the [SCN] button on the remote control for the thumbs down. Notes: • You can personalize your stations by “thumbs up” or “thumbs down”. • PANDORA limits the number of thumbs down allowed on their service. If you attempt to thumbs down songs beyond the limit, the current song continues to playback.
The Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music.
English AUX Operations Press [SRC / ] button on the panel to select “AUX”. AUX is just for audio content with 3.5mm Jack connector plugged into audio-in socket on the front panel. AUX Input sensitivity setting 1. Press and hold the [DISP] button (1 sec.). 2. Turn the [VOLUME] knob to select “AUX SENS”. 3. If the output level of connected external audio player is “HIGH”, rotate [VOLUME] knob and choose “LOW”. And if the output level is “LOW”, choose “HIGH”. 6.
The USB connector is broken. Replace with a new USB device. The USB device is damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing with a different USB device. Connectors are loose. No sound heard with the display “No File” shown. No MP3/WMA file is stored in the USB device. Store these files properly in the USB device. Sound skips or is noisy. MP3/WMA files are not encoded properly. Use MP3/WMA files encoded properly.
English 4) Cautions on Installation 9. I NSTALLATION / WIRE CONNECTION GUIDE 1. Prepare all articles necessary for installing the source unit before starting. 2. Install the unit within 30° of the horizontal plane. (Figure 2) 3. If you have to do any work on the car body, such as drilling holes, consult CONTENTS 1) Before Starting....................................................................... 15 2) Package Contents..................................................................
1. Before installation, please make sure proper connections are conducted and the unit operates normally. Improper connection may result in damage to the unit. 2. Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3. Before installation, please fasten all power cables. 4. DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head. 5.
16-Pin Connector Extension Lead (attached to the source unit) Black White Rear Left / SUB OUT 1 English 7) Wiring and Connections Black Rear audio output (Left)/ Subwoofer output 1 Gray Front Right Gray/Black Red White Rear Right / SUB OUT 2 Rear audio output (Right)/ Subwoofer output 2 Front Left White/Black Purple Rear Right Gray Black Red Purple/Black Left Right Front audio output terminal Green Rear Left Red wire (Power lead) Accessory 12V Green/Black Black 4-Speaker system SWC S
English 10. WARNING -English:" This device complies with industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interrence, and (2) this device must accept any interference, including interference that may cause undersired operation of the device." -French:" Le présent appareil est conforme aux CNR d’Industrie Canada applicablestechnicien aux appareils radio exempts de licence.