User's Manual

ManualsBrandsClarion ManualsElectronicsCar equipment unit

Clarion Co., Ltd.

Confidential

INSTRUCTION MANUAL OF UGZZ8-X01

1. BLUETOOTH MODULE SPECIFICATION

1-1. PRODUCT NAME

UGZZ8-X01

1-2. MANUFACTURER

ALPS ELECTRIC

1-3. FEATURES

Bluetooth

™

Specification V2.0+EDR support

Complete type of Bluetooth module, built-in various profile

Built-in Link controller, Link Manager Protocol

Output Power class2 compliant

Type with a chip antenna

Full custom package with pwb can be fit to only navigation products made by Clarion

Built-in Flash memory(16Mbit), system clock 26MHz(OSC)

B to B connector interface

1-4. SPECIFICATION

1-4-1. MECHANICAL SPECIFICATION

1-4-1-1. EXTERNAL DIMENSIONS

Refer to the following page.

Bluetooth

Module

ALPS

ELECTRIC

On-Board Lug Terminal

ETO

OG-R

ＲＦ COAXIAL CONNECTOR

HIROSE ELECTRIC

U. FL-R-SMT-1[15]

FPC Connector

HIROSE ELECTRIC

FH12-30S-0.5SH[55]

FPC Connector

terminal No.

Tact Switch

ALPS ELECTRIC

SKRPABE010

ROHM

SML-

311DTT86J2

INSTRUCTION MANUAL OF UGZZ8-X01 - 1 / 9 -

Summary of content (9 pages)

PAGE 1
Clarion Co., Ltd. Confidential INSTRUCTION MANUAL OF UGZZ8-X01 1. BLUETOOTH MODULE SPECIFICATION 1-1. PRODUCT NAME UGZZ8-X01 1-2. MANUFACTURER ALPS ELECTRIC 1-3. FEATURES Bluetooth™ Specification V2.
PAGE 2
Clarion Co., Ltd. Confidential 1-4-1-2. MASS 10.17 [g] (Typ.) 1-4-2. ELECTRIC SPECIFICATION 1-4-2-1. POWER-SUPPLY-VOLTAGE DC +3.1 to +3.6 [V] 1-4-2-2. TEMPERATURE RANGE -40 to +85 [degree C] 1-4-3. RF SPECIFICATION 1-4-3-1. NORMAL TRANSMIT POWER(AVERAGED POWER) -6 to +4 [dBm] 1-4-3-2. REFERENCE SENSITIVITY LEVEL(BER=0.001%) MAX. -70 [dBm] 1-5. LABEL INFORMATION 1-5-1.
PAGE 3
Clarion Co., Ltd. Confidential 1-5-2. CONTENTS OF LABEL Model Number Rev. Number Model: UGZZ8-X01 060-8136-01 Clarion Parts A Lot Number TELEC Mark & ID SJ20608136 IC:419C-0608136 001WWDA1609 FCC ID & IC ID Company Name 1-6. CONNECTOR PIN ASSIGNMENT FPC Connector terminal NO. 30 1 NO.
PAGE 4
Clarion Co., Ltd. Confidential 1-7. BLOCK DIAGRAM 2. PROCEDURE TO BUILD IN 2-1.
PAGE 5
Clarion Co., Ltd.
PAGE 6
Clarion Co., Ltd. Confidential 2-2.
PAGE 7
Clarion Co., Ltd. Confidential (2)Connect External antenna to UGZZ8-X01 , FPC cable connection between UGZZ8-X01 and FSWA PCB 1)Connect the dot mark side to FSWA PCB ※firmly-lock the ＦＦＣ connector Navigation unit External A dot mark Point of contact side 30pin FFC cable 2)connect a cable as follows. After placement , fix it in TAPE-DV1. Arrange a cable between BT module IC and FPC connector TAPE-DV1 More than 4 A cable do not be arranged on a white print part External antenna More than 4.
PAGE 8
Clarion Co., Ltd. Confidential (3) Install F-SHIELD-CASE-AS to Navigation unit (4) Install INNER-ESCUTCHEON-AS to Navigation unit (5) Install REAR-COVER-AS to Navigation unit (6) FPC cable connection between Navigation unit and 8400US-MONITOR-AS (7) Install 8400US-MONITOR-AS to Navigation unit (8) Pasting up of BT-COVER in Navigation unit BT-COVER does not overlap the throttle portion.
PAGE 9
Clarion Co., Ltd. Confidential 3. NOITCE Avis 3-1. General information -Please note that this users manual should not be provided to end-users. 3-2. FCC Regulatory Information -This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.