User's Manual

24/4/2012

R-138z Networking device

Functions

- Connect the computer with the network

- Act as a repeater in the network

Specifications

Power supply AC adapter 5V DC

Battery LC 18650 3.7V Lithium battery

Power consumption Max 100mA

Low battery indication 3.4V – acknowledge, 3.2V – power off

Installation Wall-hanging

Number of users Max 3 users

Communication 433.92MHz, FSK, 57.6K bit rate

Address length 16 bit

USB USB 1.0

Operating temperature range

0 – 60 ℃

PAGE 1
24/4/2012 R-138z Networking device Functions - Connect the computer with the network - Act as a repeater in the network Specifications Power supply AC adapter 5V DC Battery LC 18650 3.7V Lithium battery Power consumption Max 100mA Low battery indication 3.4V – acknowledge, 3.2V – power off Installation Wall-hanging Number of users Max 3 users Communication 433.92MHz, FSK, 57.6K bit rate Address length 16 bit USB USB 1.
PAGE 2
Instructions of use Network Status Power Network Test 1. Connect the computer with the network - Connecting R-138z to a computer does not require external power. - Install the PL-2303 USB driver, downloadable on http://www.prolific.com.tw/eng/downloads.asp?ID=31. - When using the Wetness Care system, select the appropriate COM port. This can be viewed in the Windows Device Manager. 2. Act as a repeater - Please use 5V power supply or battery. 3.
PAGE 3
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.