Smart Toilet Operation Manual Warranty Card Dear users. Hello! Thank you for choosing our electronic bathroom products! In the use of the kind of problems, please check yourself according to the troubleshooting on the product manual. When you can not be ruled out, please contact our after-sales service in time. 一.Information material 二.Warranty Card Notes. 1. Please fill in the content of the warranty card to complete. 2. The warranty card and invoice are important proofs to enjoy the warranty.
四. The following cases do not fall within the scope of maintenance exemption and require paid maintenance. 1. out of warranty period. 2. where a valid invoice and warranty card cannot be presented during the warranty period. 3. failure or damage caused by transportation collision, etc. after purchase. 4.
Catalog Catalog -----------------------------------------------------------------02 Function list -----------------------------------------------------------03 Security Knowledge Safety instructions ---------------------------------------------------04 Precautions ---------------------------------------------------------05-06 Packing list Name of toilet assembly and accessories -----------------------07 Confirmation items before installation --------------------------08 Installation instructions Installatio
Common fault analysis and troubleshooting ----------------------------19 Specification Specification ---------------------------------------------------------------------20 Warranty Card Warranty card --------------------------------------------------------------------21
Function List 1. Washing function ------------------- --- sprays warm water from the washing nozzle to thoroughly clean the buttocks. 2. The female function ------------- ------ is designed for daily female hygiene and cleans carefully to prevent bacterial infections. 3. Mobile rinse ------------------------- -------- When performing the wash or female function, the nozzle can be moved back and forth to enhance the cleaning effect. 4.
to speed up the drying of the buttocks after rinsing. 8. Seat cushioning ------------ ----- seat and cover are equipped with a cushioning device, when using a gentle landing, will not make a "pop" noise. 9. Intelligent sensing --------- ------ automatically sense when a person sits on it, so that the machine is in a usable state. 10.
15. Power outage flushing --- ------ can flush normally when the power is out. 16. Foot sensing flush ------ ------ When sensing the sensing button below the toilet with your foot, the toilet flushes once automatically. 17. Foot sensing flip ring ---- ------ When sensing the induction button under the toilet with your foot, the toilet flip ring will be turned up automatically.
Specification Water supply method ---------------------------- tap water supply Water supply pressure range --------------------0.12MPa~0.75MPa Rated voltage ----------------------------------------220V~/50Hz Rated power -----------------------------------------1280W Cleaning device 1. Heating mode --------------- instant heating mode, no warm water tank 2. Water consumption for hip cleaning ----------0.6~0.8L/min 3. Female cleaning water consumption ----------0.6~0.8L/min 4.
(about 40 ℃) 3. Safety measures -------------------- temperature fuse, temperature control switch Drying device 1. Maximum drying power ---------350W 2. Temperature control ----- room temperature, low temperature, medium temperature, high temperature (about 32 ~ 65 ℃ , the temperature of the warm air outlet) 3. safety measures ---------- temperature sensor detection, temperature sensitive switch, temperature fuse 4.
Failure Analysis Common Failure Analysis and Troubleshooting Condition ----------Cause ---------Solution 一. 1. Toilet seat does not work at all ---- power outage ----- wait for incoming call 2. Toilet seat does not work at all ------ power plug disconnected ------press the red button on the power plug 3. toilet does not work at all ------- toilet is not open ----- press the "power" to open the toilet 二. 1. Cleaning does not come out of the water --- stop ---- wait for the water 2.
"off" --- with the remote control to set the water temperature to the heating state 四. 1. Cleaning water stop ------ cleaning time reached after the automatic water stop -------- press the corresponding cleaning button again to continue cleaning 2. Stop the water during cleaning ------ press the "stop", "drying" key ----------- press the corresponding cleaning button again to continue cleaning 3.
4. Warm air drying stop midway --------- drying process, the human body left more than 3 seconds -------- into the seat, press the "drying" button, continue to dry 六. 1. Seat is not hot --------- seat temperature set to "off" -------- with the remote control to set the seat temperature for the heating state 2. Seat is not hot ---------- toilet seat in a power-saving state -----------close the energy-saving state, wait about three minutes 七. 1.
Safety knowledge Safety Information Please observe the safety knowledge Pay attention to the following warning signs, which are related to safety The signs and their meanings are described as follows. If operation is carried out without paying attention to this sign, it may cause danger Failure to observe this sign may result in personal injury or property damage.
the left indicates "Strictly Observe". Warning Do not spill water or other conductive liquids on the product or the power plug to avoid electric shock or fire.
Safety knowledge Precautions Warning This product belongs to electrical products, please do not place the product in water or high humidity, when using in a humid place, open the ventilation fan or vent to maintain a good ventilation environment to prevent electric shock or fire. Power requirements. 1. Please use high sense, fast type leakage switch (rated sense current 15mA or less protection) in the socket circuit. 2.
5. Please make sure the power socket and plug are dry and no water is allowed.
○Do not use hands or other objects into or block the warm air blowing outlet, will lead to burns, electric shock. ○Do not use water sources other than tap water, which may cause skin inflammation and other problems. Do not use the toilet seat to flush anything other than urine, faeces and toilet paper, as this may cause the toilet seat to become clogged. Do not put lit cigarettes or other incendiary materials into the toilet, as this may cause a fire.
Daily Maintenance Body care and maintenance 1. Need to cut off the power when cleaning to prevent electric shock 2. When cleaning, please use a soft cloth or sponge with neutral detergent to wipe, prohibit the use of acid and alkaline detergents and other corrosive detergents, prohibit the use of rough and uneven sandpaper hard cloth to wipe, to prevent scratches products. 3. Please use a screwdriver to remove the filter, replace the filter regularly and clean it with a brush.
Long-term non-use of maintenance and maintenance When not in use for a long time, please turn off the machine, cut off the power, close the water inlet angle valve, and clean the filter.
Instructions for use Press the key to turn the light on or off. Press the key to turn on or off the energy saving function. Press the key to adjust the cleaning water pressure, only in the cleaning state, press - water pressure decreases, press + water pressure increases. Models with automatic flip cover function, press the + key to switch the cover in the standby state, press - to switch the seat ring.
the indicator light is off to close the drying heating. Press this key repeatedly, the gear cycle conversion. Press this key to adjust the temperature of the cleaning seat, adjustable high, medium, low, off four gears, for the indicator light for the gear light, red for high-grade, green for medium, blue for low, the indicator light is off for the closure of the seat heating. Press this key repeatedly, the gear cycle conversion. Toilet foot induction instructions for use.
Safety knowledge Warning 1. ○ When not in use for a long time, please cut off the power and water supply. ○ Please use neutral cleaning agent for maintenance, do not use the following items: toilet cleaner, banana water, volatile agent and decontamination brush light, which may damage the plastic parts. ○ The product ceramic base is strictly prohibited to use cement installation, cement installation may be due to expansion and propped up cracked toilet seat.
3. Please do not plug and unplug the power supply with wet hands, otherwise it may cause electric shock. 4. do not repair, disassemble or modify the product by yourself, which may lead to fire or electric shock. The water inlet braided pipe should not be repeatedly disassembled and used, so as not to cause water leakage 5.
Instructions for use Press this key to stop the running program. Press and hold the key for 5 seconds to turn off the power of the machine. Repeat the above operation if you need to turn on the machine. When seated, press the key hip wash program running. Press this key twice, the spray bar back and forth reciprocating operation to increase the cleaning range, press the key again to close the reciprocating cleaning, in the case of not in the seat, press the key will not work.
not in the seat, the button will not work. Press the key to perform the flush function, long press the key for 5 seconds, you can turn on and off the automatic flush function. Automatic flush function description details, please refer to the display instructions. In the cleaning state, press the key, the cleaning water pressure will change size to achieve the massage effect. Press the key again to turn off the massage function.
Confirmation before installation Confirmation before installation. 1 、 Confirm whether the installation location has a socket, voltage 220V~/50HZ, and effective grounding. 2、Confirm whether the height of the power outlet is greater than 50CM from the ground 3 、 Confirm whether the water pressure of the inlet valve is in the pressure range of 1.5kg-5.5kg, and the flow rate is greater than 6 liters of water per ten seconds.
Installation Instructions Installation steps. 1. Install the water inlet angle valve Mark the center line of the drainage port on the ground, and install the inlet angle valve at a suitable location on the wall according to the size of the toilet seat. After installation, open the angle valve for drainage to confirm that the water quality in the pipe network is clean and close the angle valve. 2.
According to the location of the drainage port, install the flange so that the flange is fixed on the ground. 4.Install the base After the flange is installed, install the base on top of the flange using the reference line in step 2 as a reference. 5.
7. Water test Open the water inlet angle valve and test the product in water until it works normally. 8. Electricity test After completing the installation, electrify the electronic toilet for testing, and check carefully until the product works normally. Note: Keep the socket height above 50cm from the ground. Please use 220V AC power, otherwise it will cause product failure. 1. It is forbidden to move the product from the lid part, otherwise it may cause mechanical failure.
2. If the power cord or plug is broken, or the socket is loose, please do not use the product. The plug should intervene in the socket with grounding. Attention 1. Install the 220V (10A) socket above 50cm on the ground. 2. Install the socket in a place where water does not splash easily. 3. Use a grounded outlet. 4. Insert the power plug of the product into the socket.
Instructions for use Instructions for use of the body monitor. -- power indicator: light up when the power is on, off when the power is off. -- female cleaning instructions: indicator light on when female cleaning, off when operation is complete. -- hip cleaning instructions: the light is on when the hip cleaning, and goes off when the operation is finished. -- Drying instructions: The indicator light is on when drying is running, and goes off when the operation is finished.
the indicator light is on, the display for cleaning water temperature, adjust the temperature when the indication shows the adjustment temperature, temperature adjustment is completed after the display automatically converted to cleaning real-time water temperature, in the adjustment of cleaning water pressure The indicator light is on, showing the gear, adjustment shows 1-4 gear, after the adjustment is completed, the display automatically converted to cleaning water temperature.
------ deodorization instructions: the light is green when lit, that deodorization is underway. If the light turns red, please add deodorant in a timely manner. Note: Only the model with deodorant function, the indication is effective. ------- power indicator: light when the power is on, power off off.
automatic jump to the energy-saving state. In the energy-saving off, the seat temperature for the adjustment problem. -- seat temperature indication, in standby to display the seat real-time temperature, adjust the seat temperature, display the adjustment temperature. In adjusting the drying temperature, display the drying temperature, drying work when the display drying temperature. ------ deodorization instructions: the indicator is green light up, that deodorization is underway.
Knob use instructions 1. Hip wash (when the human body into the seat) Hip wash: when the seat, knob clockwise rotation, open hip wash function, knob aperture becomes blue aperture, cleaning cycle for 90 seconds, cleaning process again clockwise rotation knob open reciprocal cleaning, reciprocal cleaning when the rotation aperture becomes blue rotation aperture, again rotate off reciprocal cleaning, cleaning before and after the spray bar will be a self-cleaning spout.
nozzle self-cleaning. After cleaning is completed, the machine will automatically perform a flush, and automatically switch to the drying program, drying 180 seconds, drying when the rotating aperture becomes a purple aperture. 3. Drying/stopping/flushing/power Flushing/power: Light up the knob to execute flushing. Light up the knob when washing or drying to stop the program.
5. Energy-saving function on, the display is a green aperture. Power failure flushing When the power failure, the remote control operation will be invalid, if you need to flush, you only need to press the knob to flush. Power outage flushing function is limited to the use of power outages, because the battery power is limited, please do not use long-term. Power failure flushing function, if the power failure flushing can not be used, please replace the battery in the battery box.
Instructions for use Remote Control Installation 1.Install the remote control bracket Remove the backing paper of the tape and stick the bracket on the selected wall surface. 2.
Notes on operation 1. Do not operate the remote control with wet hands, otherwise the remote control may not work properly. 2.Please replace the battery with the same size in time when the battery is used up. 3. Remove the battery when it is not used for a long time. *This machine has a program memory function, each function temperature, spray bar position, cleaning water pressure for your last adjusted parameters. Remote control right. 1. Confirm that the machine is in the case of power failure 2.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.