User Manual

ManualsBrandsCixi City Yidong Electronic ManualsElectronicsWi-Fi Smart Adaptor

Wi-Fi Smart Adaptor Operating Instruction

Table of contents

I. Product Overview------------------------------------------------------------------------2

II. Product Features-------------------------------------------------------------------------2

III. Mobile Client Software Installation----------------------------------------- ------2,3

IV. Phone Wi-Fi Network Connection Settings-----------------------------------------3

V. Adding Device---------------------------------------------------------------------4,5,6,7

VI. Control Operation--------------------------------------------------------------------7,8

VII. Modify Device Information----------------------------------------------------8,9,10

VIII. Timer Setting-----------------------------------------------------------------10,11,12

IX. Countdown Setting------------------------------------------------------------12,13,14

X. Restore Factory Settings--------------------------------------------------------------14

XI. Delete Device---------------------------------------------------------------------14,15

XII. Technical Parameters----------------------------------------------------------------15

XIII. Failure Analysis---------------------------------------------------------------------15

XIV.Cautions---------------------------------------------------------------------------15,16

XV. MPE Reminding----------------------------------------------------------------16,17

XVI.Region Selection--------------------------------------------------------------------17

XVII.After-sales Service -----------------------------------------------------------------17

Summary of content (17 pages)

PAGE 1
Wi-Fi Smart Adaptor Operating Instruction Table of contents I. Product Overview------------------------------------------------------------------------2 II. Product Features-------------------------------------------------------------------------2 III. Mobile Client Software Installation----------------------------------------- ------2,3 IV. Phone Wi-Fi Network Connection Settings-----------------------------------------3 V.
PAGE 2
I. Product Overview Wi-Fi smart plug switch is a kind of power socket, via Wi-Fi wireless network to connect Internet, so as to control electric appliance. From anywhere with an Internet connection, via smart phone client-side, user can control the power on/off and the status display of the socket; meanwhile, client-side supports control of multiple sockets.
PAGE 3
After successful installation, an icon will appear on the phone screen as follows (Figure 1): Figure 1 IV. Phone Wi-Fi Network Connection Settings  Click the “Settings” button on the phone interface (Figure 2), select the “Wi-Fi” to click into wireless network setting, and set the “Wi-Fi” control switch as open (Figure 3), i.e. click household wireless router model "VM664034-2G" and enter the password to connect (Figure 4). Note: Do not connect the phone to the 5GHz WIFI router.
PAGE 4
V. Adding Device  The first time you need to configure the product, plug in the product, place the equipment on home Wi-Fi environment, make the phone connect to Wi-Fi (About how to connect the phone to Wi-Fi, it has been described in details above).  After the product is powered on, the blue indicator in its front is on slow flashing mode. Long press the on-off button for more than 4s until the blue LED lights become quick flashing, which means on network configuration status. Loosen the button.
PAGE 5
Click the “Action right now” button (Figure 8) to enter into the main interface (Figure 9). There is no devices list to be controlled for the first time using the software, so we need to add and configure controlled devices. Click “setup” button on Figure 9 to entry into Figure 10. (Figure 9) (Figure 10) There are two methods: Method 1： Click the “Smart Config” button on Figure 10 for entering into Config page (Figure 11).
PAGE 6
Figure 12 Figure 13 While configuring, the blue LED in front of the product will flash from fast to slow until the LED keeps lighting and "success" is prompted from the phone software to indicate the device is successfully added (Figure 14), which means the successful connection of socket to Wi- Fi router. Figure 14 Figure 15 Click the “Device” button in Figure 14 to enter into Figure 15, by this time, the socket will be automatically added to the device list in the [Device] interface.
PAGE 7
 Enter YD-SW1 software(the equipment cannot be controlled at this time when the equipment icon appears in the interface) equipment setting as Figure 10 and Click “Add device by soft AP mode” .  Enter Figure A. If the wireless router used in your home is WM664034-2G, click the router and input the password to connect. After successful configuration, click OK button in Figure C for confirmation.
PAGE 8
Remote Control: When you are not in the current socket Wi-Fi LAN, you can remote control them via GPRS, mobile 3G or other Wi-Fi networks (Just make sure your phone is connected to the Internet). The system automatically confirms whether you are local or remote. If remote, it will detect the remote control password at the first time clicking power button; after the password is confirmed, you can enter the control status.
PAGE 9
reflect the picture on the device list, which is more intuitive to reflect your socket control and the corresponding appliance, and more convenient for your operation. Figure 22 Also you can lock/unlock the device here. Click on the "Shape Lock" icon, then single click to lock and double click to unlock (see Figure 23, 24). Once locked, no one can search out the socket.
PAGE 10
be changed. Fill in the old and new password as requested (factory default remote password is 666666) (see Figure 26 & 27). After successful modification, other users whose remote password is different from the one you set cannot remotely control your appliances. Figure 25 Figure 26 Figure 27 VIII. Timer Setting  Enter into main control interface (see Figure 28), click “Timer” button into Figure 29, and then click “Add” to add timer task.
PAGE 11
Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 11
PAGE 12
Figure 34  Delete Timer Task (see Figure 36) Figure 35 Select and long press the timer task, “Delete” pop up, and press “OK” to delete the timer task. If custmer use iphone operating system just slip to the left to delete countdown task. Figure 36 Note: 1. Timer task must be set under local Wi-Fi (i.e. Wi-Fi that the socket connected to). Timer Task cannot be set remotely. 2. After the task being set up in local, task will be executed no matter it is local, remote or mobile phone without any network. 3.
PAGE 13
Figure 37 Figure 38 Figure 40 Figure 41 Figure 39 Figure 42  Delete Countdown Task (see Figure 43) Select and long press the countdown, “Delete” pop up, and press button“OK” to delete the If you use Iphone operating system,just slip left to delete this devise. timer task.
PAGE 14
Note: 1. Countdown task must be set under local Wi-Fi (i.e. Wi-Fi that the socket connected to). Countdown Task cannot be set remotely. 2. After the task being set up in local, countdown will be executed no matter it is local or remote or mobile phone without any network. 3. Timing error. Due to the deviation of the phone time and system cloud time, there will be tens of seconds or one minute timing error, depending on the time difference of each user’s phone. 4.
PAGE 15
Figure 45 Figure 46 XII. Technical Parameters Voltage: Max Load: 125VAC, 60Hz 15 A, Resistive ,15A General purpose, 10A Tungsten,TV-5,1/2HP WIFI Frequency : 2.4GHz Communication Standard: IEEE802.11b/g/n Security Mechanism: WEP/WPA-PSK/WPA2-PSK, TKIP Communication range/distance: using in the normal Wi-Fi signal environment Product Type: WFU-1 Software Version: YD -SW1 Operating temperature 0 oC to +35 oC XIII. Failure Analysis 1. Check if the power socket connection is normal 2.
PAGE 16
susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 17
y être exposée àune distance de moin de 20 cm. Installer les antennes de facon àce que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’ antenne. La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au moins 20 cm des personnes pendant son functionnement. XVI. Region Selection Limited by local law regulations, version for North America does not have region selection option. XVII.