PD-1s mk3 Pro-Drive Direct Drive Turntable Ref. No: 170.
Safety Warnings: The unit should not be opened or repaired by anyone except properly qualified service personnel. Double insulated - when servicing, use only identical replacement parts. All the safety and operating instructions should be read before the appliance is operated. To prevent fire or shock hazard, do not expose this appliance to rain or moisture. To reduce the risk of electric shock, do not remove the cover (or back). There are no serviceable parts inside.
Assembly Instructions Scratch Mixing Tip 1. Remove the main unit with the packing from the box and take off the packing. If you are using the deck for scratching the cartridge can be adjusted to give better traction as follows: Align the cartridge in a direct line to the back of the tone arm. 2. Insert the 45-rpm adaptor in the slot on the turntable. 3. Place the turntable platter onto the center spindle. 4. Place the slip mat on the platter. 5.
Maintenance CE Markings • EMC Conformity Clean the stylus periodically with a soft brush to prevent the accumulation of dust. • When the sound becomes distorted or noisy, check the stylus. If worn out, replace it with a new one. • From time to time, the dust cover and turntable cabinet should be wiped with a soft, dry cloth.
