MPSD - 1 USB And Dual SD Card MP3 Player OPERATING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully Please keep these instructions for future reference 1. Do not use the apparatus near water. 2. Clean only with dry cloth. 3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 5.
MAIN FEATURES Auto cue Auto BPM Pitch Bend Fader start Pitch display Folder Search Fast Track Search Single/Continuous Music Master Tempo Mp3 Track Listings, ID3 Tags SD & SDHC cards available Full Functional MP3 Playback 1/75th second frame search Big LCD Display with Backlight Selectable elapsed and remain time display Jog Wheel Pitch Bend +/-100% Seamless Loop (uninterrupted loop playback) USB mass storage device available Adjustable pitch percentages: +/-4%,+/-8%,+/-16% CONTROLS AND F
CONTROLS AND FUNCTIONS CONTROL UNIT 3. SEAMLESS LOOP (See basic operation for more information.) IN BUTTON – Allow you to set the cue point without stopping the playback. This button also sets the beginning of a seamless loop. When the button contains a cue point it lights up. OUT BUTTON – Used to set the endpoint when looping music. The point where you press the button will be memorized as an endpoint of the loop. The player starts to loop seamlessly until you press this button again to exit.
CONTROLS AND FUNCTIONS CONTROL UNIT 17. CUE BUTTON –Pressing the CUE button during playback immediately pauses playback and returns the track to the last set cue point. The CUE LED will glow when the unit is in cue mode. The LED will also flash every time a new CUE POINT is set. The CUE button can be held down to momentarily play the music. When you release the CUE button it instantly returns to the CUE POINT. You can also tap the CUE button to create a STUTTER EFFECT. 18.
CONTROLS AND FUNCTIONS 1 LCD DISPLAY 4 3 2 5 17 6 16 7 8 15 9 14 13 12 11 10 1. CUE INDICATOR –This indicator will glow when the device is in CUE mode and will flash every time a new CUE POINT is set. 2. FOLDER INDICATOR – Indicates the number of the currently playing folder. 3. TIME BAR INDICATOR –Shows either time remaining or elapsed depending on the setting of the TIME BUTTON.This bar will begin to flash shortly before the end of a track.
BASIC OPERATION SOURCE SELECT functions 1. MUSIC SOURCE DEVICE SELECT There is a SOURCE SELECT BUTTON to select the music source playback in each PLAYER by your desires. You have three different choices as below: (a) THE SAME CARD PLAYBACK To play the same card in both player 1 and player 2; insert the card into either SDA or SD B slot. Press the SOURCE SELECT and both SD A LEDs in the player panel are on when card is in SD A slot; either does when card is in SD B slot.
BASIC OPERATION AUTO CUE This function will automatically set a cue point to the first music note of each track. If a new track is selected, a new CUE POINT will be set to reflect the new starting point. Push the SGL/CTN button for more than 1 second, you can switch between normal and “AUTO CUE” mode. SETTING A CUE POINT A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON is pressed. (1) You may press the IN BUTTON on the fly (while the music is playing).
BASIC OPERATION SEAMLESS LOOP 1. CREATING AND PLAYING A SEAMLESS LOOP A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire lengt h of the current folder. You can create a seamless loop between two continuous points of a music source device as below: (1) Press PLAY/PAUSE BUTTON to activate playback mode. (2) Press the IN BUTTON.
BASIC OPERATION 4. EDITING A LOOP You can edit your seamless loop you obviously must first have created a seamless loop to edit. If you haven’t created a SEAMLESS LOOP, follow the instructions in step 1 to create a loop. There are three methods as below: (1) Edit a seamless loop’s ending point You can edit the end point of the loop to make your loop shorter or longer. Make sure the loop that you want to edit is not in reloop mode. Turn the JOG WHEEL or press search buttons to make the loop shorter/ longer.
BASIC OPERATION TRACKS KNOB has three functions as below: 1. TRACK SEARCH When FOLDER LED is off, left turning the TRACK knob to backward search and forward search on the right turn. You can select the desired up to 999 tracks in a folder. Turning the track knob counterclockwise will take you to the previous track. Turning the track knob clockwise will take you to the to the next track. 2. FOLDER SEARCH When FOLDER LED is on, to select folder number by turning the TRACK knob.
BASIC OPERATION TAP BPM AUTO BPM is the default mode when power on. You can switch Manual /Auto BPM by pressing the “TAP BPM” button. Notice: Switch Manual BPM on just need one touch the button. Switch Auto BPM on by pressing the “TAP BPM” button more than 1 sec. and then the LCD will display “AUTO BPM”. There are two modes for BPM count as below: 1.
BASIC OPERATION SYSTEM SETTING Press the TIME BUTTON for 2 sec. until "PRESET " is displayed. Note: System setting will be closed automatically when more than 5 sec no function. Turn the TRACK KNOB to scroll through the different submenus including: REPEAT, Reset all, and, FIRMWARE VERSION.. You can adjust the setting by stopping on the desired submenu and pushing the TRACK KNOB. To exit the menu settings press the TIME BUTTON again.
BASIC OPERATION FIRMWARE VERSION You may display the unit firmware version Firmware is the unit internal programming code. Once enter preset menu and then turn the TRACK KNOB until Vxx.xx is displayed. “x’s” are the version number. FIRMWARE upgrade: Step1: Copy the controller code or DSP code from PC and then save into memory device (Files must be in root directory). Step2. Off the controller power cord and re-plug in.
SPECIFICATION MODEL: MPSD - 1, USB And Dual SD Card MP3 Player (compatible with USB mass storage device 1.0/1.1/2.0) POWER SOURCE: DC 6V, 2A DIMENSIONS: 482 x 88 x 120.4 mm WEIGHT: 2.03kg GENERAL: Display Pitch control range Pitch bend P itch accuracy LCD Within +/-4%, +/-8%, +/-16% +/-4%, +/-8%, +/-16% +/-0.15 % AUDIO CHARACTERISTICS (LOAD: LINE=100Kohm, TEST SIGNAL FORMAT: MP3,128Kbps) ITEM TYPICAL LIMIT CONDITION 2V +/-0.5dB 2V +/-1dB 1KHz, 0dB (TCD-782 TRK.
