Operation Manual

Active Crossovers

CX23 170.929

CX34 170.932

User Manual

Features:

 Linkwitz-Riley crossover filters

 Mono/Stereo operating modes

 Switchable Phase Invert

 Switchable Butterworth 40Hz low cut

 Balanced or unbalanced XLR connections

www.citronic.com

PAGE 1
Active Crossovers CX23 CX34 170.929 170.932 User Manual Features:      Linkwitz-Riley crossover filters Mono/Stereo operating modes Switchable Phase Invert Switchable Butterworth 40Hz low cut Balanced or unbalanced XLR connections www.citronic.
PAGE 2
Introduction: Thank you for choosing a Citronic active crossover. This product has been designed to give accurate control for a multi-amplifier sound reinforcement system. In order to achieve the best results from this equipment and avoid damage through misuse, please read and follow these instructions and retain for future reference. Warning: To prevent the risk of fire or electric shock, do not expose any part of the unit to rain or moisture.
PAGE 3
Rear Panel 27. 28. 29. 30. 31. 32. 33. 34. Voltage selector IEC mains inlet High output: Channel B High-mid or Mid output: Channel B Low or Mid output: Channel B Low output: Channel B Crossover frequency multiplier: Channel B Input: Channel B 35. 36. 37. 38. 39. 40. 41.
PAGE 4
the power amplifier which will power the main drivers of the mid-top cabinets and the HIGH outputs are connected to the inputs of the power amplifier which will drive the high frequency drivers in the mid-top cabinets Connect the crossover to mains power via the supplied IEC lead, ensuring the supply voltage is correct. There may be slight variations from these set-ups but all follow the same basic principles.