Operation Manual

ManualsBrandsCitronic ManualsAudioCEQ215

Graphic Equalizers

CEQ215 170.923

CEQ231 170.926

User Manual

Features:

 Switchable Bypass per channel

 Switchable Low Cut filter per channel

 Independent Gain controls

 ±12dB adjustment per band

 Balanced or unbalanced signal path

 LED VU display per channel

www.citronic.com

Summary of content (4 pages)

PAGE 1
Graphic Equalizers CEQ215 CEQ231 170.923 170.926 User Manual Features:       Switchable Bypass per channel Switchable Low Cut filter per channel Independent Gain controls ±12dB adjustment per band Balanced or unbalanced signal path LED VU display per channel www.citronic.
PAGE 2
Introduction: Thank you for choosing a Citronic equalizer unit. This product has been designed to deliver professional tone-shaping facilities with reliable and accurate function. In order to achieve the best results from this equipment and avoid damage through misuse, please read and follow these instructions and retain for future reference. Warning: To prevent the risk of fire or electric shock, do not expose any part of the unit to rain or moisture.
PAGE 3
Rear Panel 7. 8. 9. 10. 11. 12. IEC mains inlet Mains voltage selector Output 6.3mm jack Outputs - XLRM Inputs - XLRF Inputs - 6.3mm jack What is Equalization? Equalization (or EQ) is so called because its primary function is to accurately “equalize” or balance the frequency profile of a signal for a given application or environment.
PAGE 4
Operation Begin with all frequency sliders and the GAIN controls in the centre position (no boost or cut) at 0dB. Switch the “IN/OUT” button to IN and the respective LED will light. Adjust each frequency in turn to acquire the best response and reduce any problem frequencies. Bear in mind that many loudspeakers cannot reproduce frequencies down as far as 20Hz and that the energy from the amplifier at these low frequencies is wasted as heat in the speaker coil.