OWNERS MANUAL VERSION 1.
Safety information 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this item near water. Clean only with dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacture’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves or other items (including amplifiers) that produce heat.
MAIN FEATURES y Auto Cue y Digital output y Pitch Display y Frame Search y Single/Continuous y +10 Track skip search y Pitch range: +/-4%, +/-8%, +/-16% y 8 times over sampling 1 bit D/A converter y Relay play allow consecutive playback during two decks GENERAL FUNCTIONS 1 12 13 2 3 4 14 5 CONTROL UNIT 6 8 9 10 11 7 15 16 17 18 22 1. 19 20 21 23 OPEN/CLOSE button (Disc Tray Open/Close) – This button is used to open and close the disc tray door.
GENERAL FUNCTIONS CONTROL UNIT 6. PITCH SLIDER – This slider is used to adjust the playback pitch percentage when the PITCH function is activated. The slider is a set adjustment and will remain set until the pitch slider is moved or the PITCH function has been turned off. The maximum pitch range of the slider is +/-16%. This adjustment can be made with or without a CD in the drive. The pitch adjustment will remain even if a disc has been removed, and will reflect on any other disc loaded into the unit.
GENERAL FUNCTIONS CONTROL UNIT 17. PITCH BEND BUTTONS (-) PITCH BEND button – The (-) pitch bend function creates a momentary “Slow Down” in the CD’s pitch speed (Beats per minute - BPM) when the PITCH function is activated. This function allows the beats between two CD’s or any other music source to match. This is a momentary function. When the button is depressed the pitch speed will automatically return to PITCH SLIDER'S selected pitch. Holding down this button will give a maximum of -16% pitch.
GENERAL FUNCTIONS PLAY UNIT 2 1 4 5 3 2 6 7 1 8 5 4 1. CD TRAY – This tray is used to load and unload a compact disc into the mechanism. The tray is opened and closed by pressing the OPEN/CLOSE BUTTON. Never attempt to force the transport tray open or closed when the power is turned off. 2. OPEN/CLOSE button (CD Tray Open/Close) – This button is used to open and close the transport tray.
GENERAL FUNCTIONS 1 2 LCD DISPLAY 3 4 5 6 7 8 9 1. TRACK INDICATOR – This 3-digit indicator details a current track. The number displayed in the track indicator is a direct reference to a track being selected a track in play, pause, or cue mode. 2. TIME BAR INDICATOR - This bar visually details the time defined in the TIME METER (M, S, &F) as with the TIME METER, this bar is also dependent on the selected time function TOTAL REMAIN, REMAIN or ELAPSED.
PREPARATIONS 1. Checking the Contents Check that the carton contains the following items: (1) Main Unit (2) Controller Unit (3) Operating Instructions (This Booklet) (4) ONE (1) 8P cable right angle (5) Two (2)2P RCA path cord (L/R) (6) Two (2) Auto-start cable (7) ONE (1) AC power cord 2. Installing the Units (1) Place your unit on a flat surface or mount it in a secure rack mount case.
BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power, be sure that the disc holder had been closed with the OPEN/CLOSE button. CAUTION: Do not forcibly close the disc holder when the power is off. Do not switch off the power when the disc holder is open. To avoid damage, please don’t switch off the power until “no disc” or “time code” is showed on the LCD after the disc holder has been closed with the Open/Close button.
SPECIFICATIONS GENERAL Dimensions: Weight: Main Unit 482(W)x 88.8(H)x 262.5(D)mm Control Unit 482(W)x 88.8(H)x 97(D)mm Main Unit 5.1Kg Control Unit 1.7Kg Power supply: AC 115/230V, 60/50Hz Power consumption: 16.5W Pitch control range: within+/-4%, +/-8%, +/-16% Pitch bend: +/-16% Pitch accuracy: +/- 0.15% Digital out level 0.5V+/-0.1 p-p @ LOAD = 75 ohm (option) AUDIO CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm) ITEM TYPICAL LIMIT CONDITION Output level 2Vrms+/-0.
10
FOR MORE INFORMATION ON CITRONIC PRODUCTS VISIT WWW.CITRONIC.