Thank you for your purchase of this Citizen watch. Before using the watch, please read this instruction manual carefully to ensure correct use. After reading the manual, store it in a safe place for future reference. ■ Before using the watch This instruction manual explains the usage of calibers 051*, 051C, 0540 and 0560. Confirm your watch’s caliber No. following the instruction below.
C O N T ■ Before using the watch ..............1 ■ Main components Caliber 051* ..................................3 Caliber 051C .................................4 Caliber 0540 ..................................5 Caliber 0560 ..................................6 ■ Setting the watch Caliber 051*/051C .........................7 Caliber 0540 ..................................8 Caliber 0560 ..................................9 ■ Setting the date Caliber 051*/051C/0540/0560 .....
■ Main Components 051* Chronograph minute hand Minute hand Button B Hour hand Chronograph hour hand Small second hand Crown Chronograph second hand Button A 3
051C Chronograph minute hand Minute hand Button B Hour hand Chronograph hour hand Small second hand 4 Crown Chronograph second hand Button A
0540 Chronograph minute hand Minute hand Button B Hour hand 24 hour hand Small second hand Crown Chronograph second hand Button A 5
0560 Minute hand Chronograph minute hand Hour hand Chronograph hour hand Chronograph 1/20 second hand Button B Crown Chronograph second hand Button A The Chronograph 1/20 second hand functions as one step movement to confirm normal watch operation when the chronograph is not being used. When stopped, this hand can be re-started by pressing button A.
■ Setting the watch 051* 051C Hour hand Minute hand Crown Small second hand 1. Pull the crown out to position (2) to stop the small second hand at “0” sec. 2. Turn the crown to set the minute/hour hands to the desired time. * The date changes at 12:00 AM each day. Pay attention to AM and PM when setting the time. 3. Push the crown in to position (0) to start the hands again. * To stop the movement and reduce the power consumption, pull the crown out to position (2).
0540 Hour hand Minute hand 24-hour hand Crown Small second hand 1. Pull the crown out to position (2) to stop the small second hand at “0” sec. 2. Turn the crown to set the minute/hour hands to the desired time. * The 24-hour hand is synchronized with the hour hand. Use the 24-hour time display as a reference to confirm a.m. and p.m. setting. 3. Push the crown in to position (0) to start the hands again. * To stop the movement and reduce the power consumption, pull the crown out to position (2).
0560 Minute hand Hour hand Crown 1. Pull the crown out to position (2). 2. Turn the crown to set the minute/hour hands to the desired time. * The date changes at 12:00 AM each day. Pay attention to AM and PM when setting the time. 3. Push the crown in to position (0) to start the hands again. * To stop the movement and reduce the power consumption, pull the crown out to position (2).
■ Setting the date 051* 0540 0560 051C Crown Crown The current date is indicated here. 1. Pull out the crown to position (1). 2. Turn the crown until the desired date appears. * Do not set the date between 9:00PM and 1:00AM. Otherwise, the date may not change properly. 3. Push the crown back to position (0) after setting the date.
■ Chronograph operation 051* Chronograph minute hand Chronograph hour hand Chronograph second hand The chronograph can measure up to 12 hours in one second increments.
051C Chronograph minute hand *Chronograph hour hand * The chronograph hour hand points at the inner dial at first and the outer dial after passing six hours. Chronograph second hand The chronograph can measure up to 12 hours in one second increments.
0540 Chronograph minute hand Chronograph second hand The chronograph can measure up to 60 minutes in one second increments.
0560 Chronograph minute hand Chronograph hour hand Chronograph 1/20 Second hand Chronograph second hand The chronograph can measure up to 12 hours in 1/20 (0.05) second increments.
The Chronograph 1/20 second hand will still indicate the correct time measurement even when the chronograph is started by pressing button B while the Chronograph 1/20 second hand is functioning as one step movement. The Chronograph 1/20 second hand automatically stops at 00 second position 30 seconds after the chronograph is started. When the chronograph is stopped by the button B, the Chronograph 1/20 second hand indicates the elapsed time.
■ Adjusting the chronograph If the chronograph hands do not return to “0” position when the chronograph is reset.
<0540> Chronograph minute hand 1. Pull out the crown to position (2). 2. Press button B repeatedly to adjust the chronograph second hand to “0” position. * The hand moves quickly if the button B is pressed continuously. 3. Press the button A to reset chronograph minute/hour hands to “0” position. 4. Set the watch to current time. 5. Push the crown back to position (0).
0560 Chronograph minute hand Chronograph hour hand Chronograph 1/20 second hand 18 Chronograph second hand
1. Pull out the crown to position (2). 2. Press button B repeatedly to adjust the chronograph second hand to “0” position. * The hand moves quickly if the button B is pressed continuously. 3. Press button A repeatedly to adjust the chronograph 1/20 second hand at “0” position. * The hand moves quickly if the button A is pressed continuously. 4. Set the watch to current time. 5. Push the crown back to position (0). 6. Press the button A to reset the chronograph minute/hour hands to “0” position.
■ Precautions Water resistance Names Indication (Case or back) Non-water resistant 20 Specification Non-water resistant Everyday-use water-resistant watch WATER RESIST(ANT) Water-resistant to 3 atmospheres Upgraded everyday-use water-resistant watch WATER RESIST(ANT) 5 bar Water-resistant to 5 atmospheres Upgraded everyday-use water-resistant watch WATER RESIST(ANT) 10/20 bar Water-resistant to 10 or 20 atmospheres
Examples of use Minor exposure to water (washing face, rain, etc.
Warnings on water-resistance performance • Non-water resistant watches cannot be used underwater or in environments in contact with water. • Water-resistance for daily use (to 3 atmospheres) means that the watch may be worn while washing your face or in the rain, but is not to be immersed in water. • Upgraded water-resistance for daily use (tested to 5 bar): This type of watch is resistant to moderate exposure to water.
Cautions on exposure to water • Be sure to use the watch with the crown pressed in fully (normal position) to ensure the water resistance. If the crown of your watch is the screw down crown, be sure to tighten it completely. • Do not operate the crown or buttons when the watch is wet. • If water has penetrated the watch, or if the inside of the glass is fogged up and does not become clear in a day, take the watch to your dealer or Citizen Service Center for repair.
Keep your watch clean • Keep your watch clean to prevent rust or dirt building up as this may stain your clothes, damage the watch or appear as black residue on your wrist. Depending on use, occasional cleaning of the exterior of your watch may be necessary. • Wipe dirt off the leather band with a soft and dry cloth to prevent it from discoloring. To Avoid Injury • DO NOT wear the watch where the temperature becomes extremely high—such as in a sauna. The watch may become hot and burn the skin.
– a magnetic coin tray – speakers of a mobile phone – electromagnetic cooking devices They may interfere with function of the movement in the watch causing it to stop or operate erratically. • DO NOT place the watch on or nearby household appliances that generate static electricity such as Televisions or computer monitors. The timekeeping may be affected. • DO NOT apply any strong shock, for example, by dropping it onto a hard floor.
■ Maintenance Daily maintenance • Rotate the crown while it is pressed in fully and press the buttons periodically so they do not become stuck due to accumulations of foreign matter. • Wipe off dirt, perspiration, and water from the case and glass with a clean soft cloth occasionally. • To clean a metal, plastic, or rubber watchband, wash away dirt with water. Use a soft brush to remove dust and dirt stuck in the gaps in a metal band.
■ Battery handling • Do not attempt to recharge an old battery. • Do not dispose an old battery into a fire. • Keep batteries out of reach of children. • In the event a battery is swallowed, immediately consult a physician. • Do not disassemble,modify, or heat the battery. Doing so may cause an accident. • If a depleted battery is left in your watch, damage may be caused by leakage of battery fluid. Be sure to replace the battery promptly.
■ Information About luminous paints The paint on the dial and hands helps you with reading the time in a dark place. The luminous paint stores light (daylight or artificial light) and glows in a dark place. It is free from any radioactive substance or any other material harmful to a human body or environment. • The light emission gradually becomes weaker as time passes.
■ Tachymeter The tachymeter is the device which measures the speed of an automobile. Knowing in how many seconds the car covers a distance of 1km, the meter can measure the approximate average speed per hour during a journey (up to the maximum measurable range of 60 seconds.) Chronograph second hand If the chronograph is started at the same time as measurement, and stopped after 1km, the average speed per hour can be determined according to the position of the second hand.
■ Specifications Caliber No: Item 051* 0540 1. Type 2. Accuracy ±20 seconds/month at temperature (5°C to 35°C/41°F to 95°F) 3. Quartz oscillator frequency 32,768Hz 4. IC used 5. Effective temperature range 0560 Analog quartz watch C/MOS-LSI 1pce −10°C to +60°C (14°F to 140°F) 6. Calendar Date 7. Additional Function · Chronograph · Others 8. Battery life time 9. Battery No.