User's Manual

ManualsBrandsCitiwell International ManualsElectronicsToy Vid Cam EyeSpy Bendable Arms (SpyderCam)

TROUBLE-SHOOTING

Manufactured for and distributed by Citiwell International Inc.

Conforms to the safety Requirements of ASTM F963 and EN-71(1).

WARNING! . Not suitable for children under 3 years of age due to small parts.

In an effort to continually improve our products, the items inside this package may vary slightly

from the photographs

9-401 Magnetic Drive, Toronto,Canada, M3J 3H9

Customer Care:1866 469 9686

MADE IN CHINA

www.eyespytoys.com

Contains LiPo battery pack. • Battery pack must be recycled or disposed of properly. • If at any time in

the future you should need to dispose of this product please note that Waste Electrical Products should

NOT be disposed of with household waste. Please recycle where facilities exist. Check with your Local

Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive).

INSTRUCTION GUIDE

surveillance technology

6+6+

If at any time the camera unit or viewer/controller unit stop working, or work in an

unexpected fashion:

1. Check the condition of the AAA batteries. If necessary, replace with fresh batteries.

2. Check the battery condition icon on the viewing screen. If indicated remaining life is low,

please recharge the unit with the USB cord.

3. Turn both units off for 15 seconds and then turn them both back on. This will reset the

electronic systems in both units.

For any other problems or concerns,

please contact us

via the EyeSpy website

www.eyespytoys.com or call our Customer Assistance Line at 1866 469 9686

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

- Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

Summary of content (4 pages)

PAGE 1
6+ TROUBLE-SHOOTING If at any time the camera unit or viewer/controller unit stop working, or work in an unexpected fashion: 1. Check the condition of the AAA batteries. If necessary, replace with fresh batteries. 2. Check the battery condition icon on the viewing screen. If indicated remaining life is low, please recharge the unit with the USB cord. 3. Turn both units off for 15 seconds and then turn them both back on. This will reset the electronic systems in both units.
PAGE 2
The EyeSpy™ Spyder Cam is a fun and exciting junior spy tool for making covert observations in real time with full color and sound. KEY FEATURES Camera: - The camera is a compact, battery powered CCD camera operating in true color and night vision modes It has a built-in mounting clip and can be used on either a level surface or attached to any convenient holder such as a shelf edge, small branch, fence edge, etc.
PAGE 3
HOW TO USE (Continued) GETTING STARTED Controller / Viewer – Slide the power switch on top of the viewer to the left. The screen will light up and show the EyeSpy logo. In another second or two the menu will appear. It will show five options: Night Vision Video Screen OFF / ON 1. Controller/Viewer: The Spyder Cam viewer’s built-in Lithium Polymer rechargeable 800mAh, 3.7 V, non-removable battery requires charging before its first use.
PAGE 4
GETTING STARTED (Continued) HOW TO USE Note: Reception is good in open areas such as arenas, or outdoors on level ground and away from buildings and transmission towers, poles and wires. Keep a good distance away from home or business Wi-Fi routers. Keep away from machine rooms. 2. Camera: Use a small Philips head (+) screwdriver to remove the battery compartment cover located on the bottom of the camera. Insert three AAA 1.