Vieo1.book Page 1 Thursday, April 8, 2010 4:20 PM QUICK START GUIDE Cisco VT Camera III INCLUDING LICENSE AND WARRANTY Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.
Vieo1.
Vieo1.
Vieo1.
Vieo1.book Page 1 Thursday, April 8, 2010 4:20 PM Introducing Cisco VT Camera III Congratulations on your purchase of Cisco VT Camera III. Cisco VT Camera III allows you to add video to your communications.
Vieo1.
Vieo1.book Page 3 Thursday, April 8, 2010 4:20 PM Cisco VT Camera III Features 1 Snap shot button 4 Universal clip 2 Activity light 5 Auto focus glass lens system 3 Microphone Installing Your Cisco VT Camera III For the latest information about supported phone models and minimum PC requirements, consult the release notes for your product or contact your system administrator. If you are a system administrator or technician, release notes are available at this URL: http://www.cisco.
Vieo1.book Page 4 Thursday, April 8, 2010 4:20 PM Warning To reduce the risk of fire, connect the Cisco USB device to a certified USB port. 1. Remove the Cisco VT Camera III from the packaging. 2. Position the camera on top of your PC monitor or flat panel screen, adjusting the universal clip as necessary. See Figure 2.
Vieo1.book Page 5 Thursday, April 8, 2010 4:20 PM Position Your Cisco VT Camera III 277449 Figure 2 3. Position your camera in the middle of your monitor for optimal eye contact. 4. Position the camera no more than three feet (1 m) away from you and point it toward you. The camera contains a built-in microphone. See Figure 1 Cisco VT Camera III Features.
Vieo1.book Page 6 Thursday, April 8, 2010 4:20 PM 5. If you use speakers, position them at least 12 inches (30 cm) away from your microphone to reduce feedback. Angle the speakers away from your microphone. 6. Connect your camera to an available USB port on your computer. Your computer will detect a new hardware device and automatically download the camera drivers from the internet. Connect the Camera to a Certified USB Port.
Vieo1.book Page 7 Thursday, April 8, 2010 4:20 PM Using Cisco Video Telephony Applications You can use the Cisco VT Camera III with Cisco Unified Video Advantage and Cisco Unified Personal Communicator. For details about either of these products refer to the online help available from the applications. You can also access the documentation from the following online locations: • Cisco Unified Video Advantage User Guide available at: http://www.cisco.
Vieo1.book Page 8 Thursday, April 8, 2010 4:20 PM Regulatory Compliance and Safety Information This section describes the regulatory compliance and safety information for the Cisco VT Camera III. Regulatory Compliance The Cisco VT Camera III meets the following regulatory compliance and safety standards: Specification Description Regulatory Compliance Products with CE marking indicate compliance with the 2006/95/EC and 2004/108/EC directives, which include the safety and EMC standards listed.
Vieo1.book Page 9 Thursday, April 8, 2010 4:20 PM Specification Description Safety UL UL 60950 CAN/CSA-C22.2 No.
Vieo1.book Page 10 Thursday, April 8, 2010 4:20 PM Statement 2018—Class B Notice for FCC Modifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Vieo1.book Page 11 Thursday, April 8, 2010 4:20 PM Statement 2022—Class B Notice for Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Statement 295—Class B Warning for Korea Warning This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas.
Vieo1.book Page 12 Thursday, April 8, 2010 4:20 PM Statement 157—VCCI Compliance for Class B Equipment Warning 12 This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.
Vieo1.book Page 13 Thursday, April 8, 2010 4:20 PM Statement 388—Connect USB Device to a Certified USB Port Warning To reduce the risk of fire, connect the Cisco USB device to a certified USB port. Statement 388 Waarschuwing Tilslut Cisco USB-enheden til en certificeret USB-port for at reducere risikoen for brand. Varoitus Sluit het Cisco USB-apparaat aan op een gecertificeerde USB-poort om het risico op brand te verkleinen.
Vieo1.book Page 14 Thursday, April 8, 2010 4:20 PM Varning! Minska risken för eldsvåda genom att ansluta Cisco USB-enheten till en certifierad USB-port. Aviso Para reduzir o risco de incêndio, conecte o dispositivo USB Cisco a uma porta USB certificada.
Vieo1.book Page 15 Thursday, April 8, 2010 4:20 PM Statement 2002—Declaration of Conformity with Regard to the Directives 2006/95/EC and 2004/108/EC This equipment complies with the essential requirements and other provisions of Directives 2006/95/EC and 2004/108/EC. For more information, please refer to the Declaration of Conformity. Cisco Limited Hardware Warranty Terms Refer to the following location: http://www.cisco.com/en/US/products/prod_warranties_listing.
Vieo1.