Text Part Number: 78-7132-01 Release Notes for Cisco IOS Release 12.0(5)XK Feature Packs for Cisco MC3810 August 26, 1999 These release notes describe the Cisco IOS Release 12.
Introduction Introduction How to Use These Release Notes The tables in these release notes contain details about the Cisco feature packs. Use these tables to perform the following tasks before loading a software image on a router: 1 Use Table 1, “Cisco MC3810 Default Memory and Upgrade Options,” for the feature set memory requirements, factory-default memory, and available memory upgrades for your Cisco MC3810.
Memory Requirements • • • • Upgrading to a New Software Release, page 5 Product Numbers Quick-Reference List, page 5 Feature Pack Overview Table, page 6 Feature Set Tables, page 6 Memory Requirements Table 1 Cisco MC3810 Default Memory and Upgrade Options Memory Type Defaults Upgrade Options Flash 8 MB 16 MB Flash, MEM-381-1X16F= DRAM 32 MB — Hardware Supported Cisco IOS Release 12.0(5)XK supports the Cisco MC3810 multiservice access concentrator.
System Requirements Table 2 Category T1/E1 trunk chassis Cisco MC3810 Series Standard Hardware Categories (continued) Service Types Supported 1 Base chassis services plus channelized T1 or E1 Required Modules Optional Modules MFT1 DVM to support digital cross-connect voice (channel bank functionality/ drop-and-insert) through digital PBX or channel bank VDM3 to support video codec dialing VCM3 and/or VCM6 (1 or 2 VCMs) to support voice compression 1 2 3 4 Base chassis services include administrative
Software Compatibility Software Compatibility The feature packs described in these release notes contain Cisco IOS Release 12.0(5)XK software images, some images from previous software releases, and RSL Version 7.5.
System Requirements Feature Pack Overview Table Table 5 Cisco MC3810 Feature Packs Image Name (UNIX) Image Name (DOS) Flash Memory Required Main Memory Required RSL Installer Description Product Number CD-ROM Title CD38-C-12.0(5)= Cisco MC3810 IP Feature Pack Release 12.0(5)XK mc3810-i-mz aaa0806 4 MB1 16 MB2 Cisco MC3810 IOS IP Feature Set, Release 12.0(5)XK CD38-CP-12.0(5)= Cisco MC3810 IP Plus Voice Feature Pack Release 12.
Feature Set Tables Caution Cisco IOS images with strong encryption (including, but not limited to, 56-bit data encryption feature sets) are subject to United States government export controls and limited distribution. Images to be installed outside the United States require an export license. Customer orders may be denied or subject to delay because of United States government regulations. Contact your sales representative or distributor for more information, or send e-mail to export@cisco.com.
System Requirements Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus DLSw (RFC 1795) No Yes Yes Yes Yes DLSw+ RSVP No Yes Yes Yes Yes DLSw+ RSVP Bandwidth Reservation No Yes Yes Yes Yes DLSw Version 2 (RFC 1266) No Yes Yes Yes Yes Downstream PU Concentration (DSPU) No Yes Yes Yes Yes Frame Relay SNA Support (RFC 1490) No Yes Yes Yes Yes NCIA No Yes Yes Yes Yes NetView Na
Feature Set Tables Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus On Demand Routing Yes Yes Yes Yes Yes OSPF Yes Yes Yes Yes Yes OSPF Not-So-Stubby-Areas (NSSA) Yes Yes Yes Yes Yes OSPF On Demand Circuit (RFC 1793) Yes Yes Yes Yes Yes Protocol-Independent Multicast (PIM) Yes Yes Yes Yes Yes PIM Version 2 Yes Yes Yes Yes Yes Policy-Based Routing Yes Yes Yes Yes Yes RIP
System Requirements Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set Features IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus SNMP Yes Yes Yes Yes Yes SNMP Inform Request Yes Yes Yes Yes Yes SNMP version 3 Yes Yes Yes Yes Yes Telnet Yes Yes Yes Yes Yes VPDN MIB Feature Yes Yes Yes Yes Yes Application Specific Routing No No No No No Generic Traffic Shaping Yes Yes Yes Yes Yes H.
Feature Set Tables Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set Features IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus DHCP Yes Yes Yes Yes Yes IP Pooling Yes Yes Yes Yes Yes IPX and ARAP on Virtual Async Interfaces No No No Yes Yes IPXCP No No No Yes Yes MacIP No No No Yes Yes NASI No No No Yes Yes NetBEUI over PPP No No No Yes Yes PPP Yes Yes Yes Yes Yes SLIP Yes Yes Yes Yes Yes Airline Product S
System Requirements Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus Md5 Routing Authentication Yes Yes Yes Yes Yes MS-CHAP Support No No No Yes Yes Named Method Lists for AAA Authentication & Accounting Yes Yes Yes Yes Yes Network Layer Encryption (40-bit or Export Controlled 56-bit DES) No No No No No RADIUS Yes Yes Yes Yes Yes Router Authentication No No No No No Sublock Ph
Feature Set Tables Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus Off-Net Dialing No Yes Yes Yes Yes On-Net/Off-Net Call Rerouting No Yes Yes Yes Yes OPX Ring-Through No Yes Yes Yes Yes Pass-Through Voice Yes Yes Yes Yes Yes Permanent Connection No Yes Yes Yes Yes PLAR No Yes Yes Yes Yes Preference-based Hunt Groups No Yes Yes Yes Yes Remote Dialing No Yes Yes Yes
System Requirements Table 7 Feature List by Feature Set for the Cisco MC3810 (continued) Feature Set IP IP/ATM IP Plus Plus Enterprise Plus Enterprise ATM Plus Facility Data Link Capabilities on Multiflex Trunk Yes Yes Yes Yes Yes Frame Relay Compression (FRF.
Installation Notes Installation Notes This section describes the following topics: • • Image Installation Tips and Troubleshooting When Using RSL, page 15 Alternatives to RSL, page 16 Image Installation Tips and Troubleshooting When Using RSL Image Installation Tips The following information about RSL operations can help you with the installation process: • If you are loading software on a preconfigured router, save the router configuration file on your PC before running RSL.
Installation Notes Restoring the Startup Configuration In some cases, RSL is unable to restore the startup configuration. If this happens, follow these steps: Step 1 Ensure that all cables are properly attached to both the router and the PC. Step 2 Restart RSL and connect by using the Preconfigured router option. Step 3 When asked if you want to overwrite the existing startup configuration file, choose no. Step 4 When asked if you want to continue, choose yes.
Alternatives to RSL Max Retry Count [10]: Perform image validation checks? [confirm] yes Xmodem download using crc checksumming with image validation Continue? [confirm] yes Partition Size Used Free Bank-Size State 1 4096K 3259K 836K 4096K Read/Write 2 4096K 0K 4095K 4096K Read/Write Copy Mode Direct Direct [Type ? for partition directory; ? for full directory; q to abort] Which partition? [default = 1] 2 System flash directory, partition 2: File Length Name/status 1 68 TESTFILE [132 bytes used, 4194
Installation Notes Select a root directory where the Cisco IOS files reside (for example, d:\cpswinst\images). Caution Make sure you set up your local PC as a TFTP server. If you do not, you cannot perform the copy procedure. This caution applies to both TFTP and rcp. Step 4 Establish a console session from your local PC (which is now configured as a TFTP server) to the Cisco router by using one of these methods: • Connect the PC com port to the router console port. This is the recommended method.
Related Documentation Step 9 At the prompt, enter yes if you want to erase the existing image copy resident in the router Flash memory before copying the new one: Erase flash device before writing? [confirm] yes The entire copying process takes several minutes and differs from network to network. The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!) indicates that ten packets have been transferred successfully.
Related Documentation For caveat details, see the Caveats for Cisco IOS Release 12.0 T document, which contains caveats applicable to all platforms for all maintenance releases of Release 12.0 T. You can reach the caveats document on CCO at: Service & Support: Technical Documents: Documentation Home Page: Cisco IOS Software Configuration: Cisco IOS Release 12.0: Release Notes: Caveats: Caveats for Cisco IOS Release 12.
Cisco IOS Documentation Set You can reach the feature modules on the Documentation CD-ROM at: Cisco IOS Software Configuration: Cisco IOS Release 12.0: New Feature Documentation Cisco IOS Documentation Set The Cisco IOS software documentation set consists of the Cisco IOS configuration guides, Cisco IOS command references, and several other supporting documents, which are shipped with your order in electronic form on the Documentation CD-ROM—unless you specifically ordered the printed versions.
Related Documentation Table 8 Cisco IOS Software Release 12.
Service and Support Table 8 Cisco IOS Software Release 12.0 Documentation Set (continued) Books Chapter Topics • Wide-Area Networking Configuration Guide ATM Frame Relay SMDS X.
Cisco Connection Online Software Configuration Tips on the Cisco Technical Assistance Center Home Page If you have a CCO login account, you can access the following URL, which contains links and tips on configuring your Cisco products: http://www.cisco.com/kobayashi/serv_tips.shtml This URL is subject to change without notice. If it changes, point your Web browser to CCO and click on this path: Products & Technologies: Products: Technical Tips.
Documentation CD-ROM You can access CCO in the following ways: • • • • • WWW: http://www.cisco.com WWW: http://www-europe.cisco.com WWW: http://www-china.cisco.com Telnet: cco.cisco.com Modem: From North America, 408 526-8070; from Europe, 33 1 64 46 40 82. Use the following terminal settings: VT100 emulation; databits: 8; parity: none; stop bits: 1; and connection rates up to 28.8 kbps. For a copy of CCO’s Frequently Asked Questions (FAQ), contact cco-help@cisco.com.
Documentation CD-ROM 26 Release Notes for Cisco IOS Release 12.
