QUICK INSTALLATION GUIDE Linksys Business Series Network Attached Storage Models NSS4000 and NSS6000
Linksys Business Series NSS4000 and NSS6000
Linksys Business Series NSS4000 and NSS6000 181356 Linksys NSS4000/NSS6000 1
Linksys Business Series NSS4000 and NSS6000 2 Install Disk Drives
Linksys Business Series NSS4000 and NSS6000 Remove Drive Trays 3
Linksys Business Series NSS4000 and NSS6000 4 Install Drive in Drive Trays
Linksys Business Series NSS4000 and NSS6000 181352 Insert Drive Trays 5
Linksys Business Series NSS4000 and NSS6000 6 Install: Rack
AUX 1 Linksys Business Series NSS4000 and NSS6000 Install: Desktop (optional) 7
181363 Linksys Business Series NSS4000 and NSS6000 8 Rear Panel AUX 1
9 Connect Devices Linksys One Services Router RPS (optional, not included) APC Smart UPS (optional, not included) 181364 Ethernet cable (included) Linksys Business Series NSS4000 and NSS6000 LAN
Linksys Business Series NSS4000 and NSS6000 10 Connect to Power
Regulatory Compliance and Safety Information The Linksys Business Series models NSS4000 and NSS6000 meet the following regulatory compliance and safety standards: Description Regulatory Compliance Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed below. Safety UL 60950-1 IEC60950-1 CB /PSB CSA C22.2 No.
FCC Part 15 Class A Compliance This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
• Modifications to this product not authorized by Linksys could void the FCC approval and negate your authority to operate this product. Warning You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Canadian ICES-003 rule. Cet appareil est conforme a la norme NMB-003 d'Industry Canada.
Safety Information The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents. IMPORTANT SAFETY INSTRUCTIONS Linksys Business Series NSS4000 and NSS6000 Warning This warning symbol means danger. You are in a situation that could cause bodily injury.
SELV Circuit Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Equipment Installation Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Linksys Business Series NSS4000 and NSS6000 Environmental Specifications Dimensions 17.31” x 16.62” x 1.75” (439 mm x 422 mm x 44.45 mm) Unit Weight 21 lbs (9.
Power Supply Safety Warnings When using the Linksys Business Series models NSS4000 and NSS6000, observe the following power supply safety warnings: TN Power The device is designed to work with TN power systems. Ground Conductor Warning Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
Circuit Breaker Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A U.S. (240 VAC, 10A international) Main Disconnecting Device Linksys Business Series NSS4000 and NSS6000 Warning Caution The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Only use the Linksys-specified power supply.
Linksys Software License Agreement v.2.14.05 License. Subject to the terms and conditions of this Agreement, Linksys grants the original end user purchaser of the Linksys product containing the Software ("You") a nonexclusive license to use the Software solely as embedded in or (where authorized in the applicable documentation) for communication with such product.
Limited Warranty Linksys warrants to the original end user purchaser of the Linksys Product (“You”) that for a period of two (2) years for the Linksys Product’s Hardware and for a period of one (1) year for the Linksys Product’s disk drives (if included), fan and power supply (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use.
WWW LINKSYS COM ©2007 Cisco Systems, Inc. All rights reserved. Linksys is a registered trademark and the Linksys One logo is a trademark of Cisco Systems, Inc.