User's Guide

Change Your Bluetooth Source
You can connect up to two Bluetooth devices to your headset at one time. Music playback is paused and active
calls are automatically placed on hold when you change sources.
Procedure
To change your Bluetooth source, play music or answer a call on a different connected source.
Delete Paired Devices
You can erase all saved Bluetooth devices from your headset.
Procedure
Slide and hold the Power/Bluetooth switch for nine seconds, until you hear "Bluetooth records erased."
Use the USB Cable
Use the included USB-C cable to connect your headset with your laptop, Cisco IP Phone, or Cisco Webex
DX device. Any connected Bluetooth audio sources take priority over the USB-C connection. For example,
the headset stays with an active Bluetooth source when you connect the USB-C cable.
Procedure
Step 1 Plug the USB-C cable into the port at the bottom of the left ear cup.
Step 2 Connect the other end of the cable to your intended device.
Cisco Headset 730 User Guide
6
Your Headset
Change Your Bluetooth Source
REVIEW DRAFT - CISCO CONFIDENTIAL