User's Guide

Procedure
Step 1 Slide up and hold the Power/Bluetooth switch for two seconds until the Bluetooth LED blinks.
Step 2 Enable Bluetooth on your device.
You can enable and disable Bluetooth from the Settings menu on most call devices.
Note
Step 3 Select your headset from the device list.
Your headset will appear in the device list as Cisco Headset 730 followed by the last three digits
of your headset serial number. See Find Your Cisco Headset 730 Serial Number, on page 30 to for
more information.
Note
Bluetooth LED
The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and
shows your headset connection status.
Table 1: Bluetooth LED Status
System StateLight Status
Successful Bluetooth connection
Solid blue, then
off
Headset in Pairing Mode
Blinks blue
Cisco Headset 730 User Guide
5
Your Headset
Bluetooth LED
REVIEW DRAFT - CISCO CONFIDENTIAL