NOTE This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1 Getting Start 1.1 Feature This Genesis combining HUB, Router, and high-speed serial interface js a use friendly SOHO (Small Office, Home Office) appliance. Glossary . Router A device connects different LAN and networks. ® 10BASE-THUE (4 JR-45 ports) . Four Theme ABASE-T ports Glossary \Ethernet A network protocol scheme originally developed by Xerox, DEC, and Intel for local network, includes ABASE-T and ABASE-S etc. ABASE-T One of Ethernet protocol.
® RAS Client IP Connection ' Connecting RAS Client Dial-Up Connection . | Glossary . ; PAS “A service allows remote computer connects to local network through (Remote PST (Plain Simple Telephone Network) dial-up. i [Access Service) Client In networking, the terminal who accept services. Server In networking, the terminal who offer services. ® RAS Server IP Connection Allow RAS clients to connect as a server.
® ISP LAN Dial-Up IP Connection communication. Glossary | Connecting LAN and Internet through dial-up network to ISP to enable bi-directional LAN © A computer Network) communication system limited 10 no more than a few (Local Area’ miles and using high-speed connection (2 to 100 megabits per second). LAN dial-up IP Connecting LAN and Internet through dial connection enable bi-directional communication -up network 10 ISP to I ® ISP Leased Line IP Connection i .
® Telephone Dial Connecting to ISP without auto disconnecting if Telephone Dial is activated and the time is during the setup period (PM11:00 ~ AM 8:00) | . Glossary Telephone Dial A log in service provided by NTT which allow user to use telephone service from PM: 00 ~ AMS: 00 st. discount rat, aegis he connection time. : ® AT command control for MODEM or TA ! Through AT command, MODEM or TA can be initiated and perform auto connecting and disconnecting.