SF. 10/100 Dual Speed Ethernet Hub —" — FCC Compliance Statement This device compliance with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
10/100 Dual Speed Ethernet Hub — — CE Compliance Statement We hereby certify that the Ethernet Hub complies with the EN 50081.1 and EN 50082-1 requirements. ce NOTE: EN 50082-1 standard: IEC 801-2 {Electrostatic Discharge) IEC 801-3 {(Radiated Immunity) + IEC801-4 (Electrical Fast Transient/Burst) All registered trademarks are the property of their respective owners.
CONTENTS FCC Compliance Statement ovum CE Compliance Statesmen Chapter 1 Introduction Summary of features Package Contents Front and Back views of the Hub LED Indicators MD I-XMDI Switch Chapter 2 Installing the Dial-speed Hab S— Pr-Installation Requirements... Connection for a 10 and 100 Bps Device Connection for Hubs Cascading Appendix A username resist responsiveness Specifications .. Appendix RB.
10/100 Dual Speed Ethernet Hub a Chapter 1 Introduction The Ethernet Hub is a dual-spored hub that is designed to easily integrate the Fast Ethernet notwork into your existing 10 Bps network work groups, The dual-speed hub consists of two internal network segments, one is for AIRBASE-Tnetwork operation, the other one is providing 100BASE-TX Ethernet connection. It also includes an internal switching port to interlink different data transferring between 10 and 100 Bps networks.
20/100 Dual Speed Ethernet Hub — Package Contents The package of your dual-speed Ethernet hub should contain the following items: t Dual-speed Ethernet hub a External power adapter 0 User manual NOTE: If any items is missing or damaged, please contact your dealer for replacement, Front and Back views of the Hub Figures 1-1 shows the front and back view of the Dual-speed hub, NOFGMDx Rich 10/100 045 Ports. Power Socks Power [ED Controlled Gr ACY.
10/106 Dual Speed Ethernet Hub — LED Indicators The dual-speed Ethernet hub provides a variety of informative LED on the front panel for easy viewing and troubleshooting. WRESTLED The green LED indicates the power status. This green LED will be lit while the hub is receiving power, COL (10 Bps) LED The amber LED displays the 10 Bps network collision status. If a collision is defected on the internal 16Mbps network segment, the amber LED will flash.
10/100 Dual Speed Ethernet Hub ee Utilization LED The green LED displays the network utilization status, The corresponding LED (shown as 1% ~ 50%) will Tight when the network traffic utilization has reached the percentage NOTE: Figure 1-1 shows the front view of the Dual-speed hub's LED indication. The switch can be easily configuration of last RI-45 port as iambi or MID-X pin assignment.
10/100 Dual Speed Ethernet Hub wo — Chapter 2 Installing the Dual-speed Hub Pr-Installation Requirements Before you connect the dual-speed Ethernet hub to the network, make sure that you have had the proper operating environment. To provide the proper operating condition, make sure the following installation requirements: © Power Requirement: 100 to 240VAC Cable Requirement: The dual-speed Theme hub requires Category UTP cable wiring for the 10 Bps connection.
/100 Dual Speed Ethernet Hub ts — Connection for a 10 and 100 Bps Device The dual-speed hub is equipped with eight (8) JR-44 ports. Be sure to use the proper cable wiring to connect the hub 100 Bps network device. Verify the following connection requirements. NOTE: 1. Set the switch 10 position *MID-X" while connect this dual-speed hub 100 Bps server or workstation. 2. Set the switch Io position "MDI" while connect this dual-speed hub 100 Bps Ethernet hub.
10/100 Dual Speed Ethernet Hub w— —" Connection for Hubs Cascading The last JR-45 port of your dual-speed hub could be configured as MDI pin assignment and enable you to daisy-chain to another 10 or 100 Bps Ethernet hub. Before cascading the dual-sped hub to another, please make sure the following installation requirements; 10 Bps Hub Cascading Use Category 3,4 or 5 UTP cable to link your dual-speed hub to another [0 Bps Ethernet hub, Make sure the UTP cable does not exceed 100m, Based on IEEE 802.
10/100 Dual Speed Ethernet Hub —— —" — Appendix A Specifications IEEE 802.3 standards: ABASE-T, 100BASE-TX ‘Wiring Connectors: RJ-45+8 Weight: 500g Dimensions: 6.3" x 3.9" x 0.98" Emission Certifications: Immunity Certifications: Input Voltage: Power Consumption: Operating Temperature; Operating Humidity: Operating Altitude: (160mm x 100mm x 25mm) FCC Part 15 Class B TEC 801-2 {Electrostatic Discharge) IEC 801-3 {Radiated Immunity) IEC 8014 (Electrical Fast Transient/Burst) 1.
INFORMATION TQ THE USER HRA kk This device complies with part 15 of the FCC Rules. operation jig subject to the following two conditions: [LY This device may not cause harmful interference, and (2) This device must accept any interference Delved including interference that may cause undesired operation. NOTE: This equipment has been tested ang found to comply with the limits for a Class B digital device.