CIS Customized U-level Assets Management Module Specification V1.
Content 1. Overview.........................................................................................................................................- 3 1.1 Objective............................................................................................................................... - 3 1.2 Application............................................................................................................................- 3 1.3 Reference Standard..........................................
1. Overview 1.1 Objective This document defines the application and specification of U-Level Asset Management Module for: The guidance for components model selection The guidance for application The guidance for testing 1.2 Application Server room, data center, micro module data center and container data center will deploy U-Level Asset Management Module to monitor servers in the rack, manage U-level utilization, etc. 1.
2. Overall System Requirements 2.1 Wiring Topology In the application scenario of U-level Asset Management Module, wiring topology is as following: PS：The connector extension used for wiring. Wiring Mode: End-to-end：One gateway supports one rack. This mode uses for the project with high reliability and real-time. One-to-More: One gateway supports five racks at most. This mode uses for the project with saving-cost.
The distance between the first “connector extension” and the fifth should be less than 20 meters and it recommends to use Cat5e To ensure the reliable operation of U-level management module, the rack should be reliably grounded. 2.2 Application Environmental Requirements Graphic 1.
3.2 Cooling Requirements Natural heat dissipation 4. Technical Parameters of U-level Modules Attribute Device Parameters Number of Supported U-Levels 42U/44U/45U/48U(Can be customized) Single 6U module 277mm(Length) x 27mm(Width)x 11mm(Height) Single 5U module 232.5mm(Length) x 27mm(Width)x 11mm(Height) RFID Frequency 13.
5. Feature ■Adopting Digitalor MC-RFID(US Patent No: 9633235B2) technology solves electromagnetic interference and realizes 100% accuracy of U-Level positioning and identification. ■ hot plug of modules and arbitrary replacement of Secondary modules are supported. The program does not need to be reset. The modules can be configured according to the number of U-level in the rack, at most support 54 U. ■ Flexible connection; double-row in-line pins; stable and durable in series; convenient installation.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
