Jena ™ Digital Baby Video Monitor Moniteur vidéo bébé numérique Video Monitor Digital para Bebé MANUAL MANUEL MANUAL CAUTION: Keep small parts away from children. ATTENTION: Gardez les petites pièces hors de la portée des enfants. PRECAUCIÓN: Mantenga las piezas pequeñas fuera del alcance de los niños. mylevana.
SAFETY WARNINGS CAUTION: Keep small parts away from children. This product cannot replace responsible adult supervision. Strangulation Hazard: Children can become entangled in cords. Power cords should be kept more than 3 feet away from the crib and baby’s reach at all times. Baby monitors and cameras with power cords should never be hung on or near the crib. Use only with provided power supply. This product is not a toy and should be kept out of children’s reach.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Please visit our website at www.mylevana.com for information about your product’s warranty We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues please contact us using any of the following methods: Web: www.mylevana.com LEVANA Canada 4080 Montrose Road Niagara Falls, ON Canada L2H 1J9 Support: www.mylevana.
TABLE OF CONTENTS SAFETY INSTRUCTIONS ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������2 FCC STATEMENT ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
WHAT’S INCLUDED • • • • • • • • Baby Video Monitor Night Vision Camera Rechargeable Lithium Ion Battery 2 Power Adapters Charging Base for Monitor Quick Start Quide 1 Year Warranty Lifetime Customer Support This product is not a toy. This product contains small parts. Exercise care when unpacking and assembling the product. Battery life of 8 hours based on full duration testing. Battery life may vary depending on usage. Night vision range up to 15ft under ideal conditions.
MONITOR 1. ANTENNA Transmits and receives signals 12. VOLUME – Decreases the volume through the speaker 2. VOLUME LEDS Indicates the amount of sound being heard by the camera 13. TALK TO BABY™ Press and hold to talk, release to listen 3. 2.4" SCREEN 4. POWER/SCREEN ON-OFF 14. LULLABIES 5 Remote-controlled lullabies to choose from 5. MENU/ZOOM BUTTON 6. BELT CLIP/TABLE STAND 15. PAIRING LED Flashes red quickly when pairing 7. PAIRING BUTTON 16. SPEAKER 8.
CAMERA 1 5 6 2 3 12 7 9 8 4 10 11 1. ANTENNA 5. NIGHTLIGHT 9. 2. NIGHT VISION LEDs 6. NIGHT VISION LIGHT SENSOR 10. TEMPERATURE SENSOR 3. CAMERA LENS 7. ON/OFF BUTTON 11. POWER INPUT 4. MICROPHONE 8. POWER LED 12.
SETUP Battery Installation - Monitor 1 3 1. Gently remove the BATTERY COMPARTMENT COVER on the back of the monitor by sliding down. 2. Insert the included rechargeable battery, plug the battery cord into the small jack on the inside of the battery compartment. 3. Slide the BATTERY COMPARTMENT COVER back into place. 4. For extended periods of non-use, please remove battery from baby monitor.
SETUP Connecting Power to the Monitor / Charging Battery 1. Connect the power adapter attached to the charging dock marked MONITOR into an available wall outlet. For safety reasons, ONLY use the adapters included in the package. 2. With the battery in the monitor, place the monitor into the charging dock with the screen facing you. 3. Press and hold the POWER button on the side of the monitor to turn the monitor ON. 4.
SCREEN ICONS PAN/TILT SIGNAL STRENGTH NO SIGNAL TALK TO BABY™ STRONG SIGNAL TEMPERATURE EMPTY ZOOM 1X 2X PEEP MODE BRIGHTNESS OFF BATTERY STRENGTH CAMERA VIEW 1 2 3 4 VOLUME OFF DARK LOW CHARGING FULL NIGHTLIGHT LULLABIES PAIRING CAMERA CAM 1 CAM 1 CAM 2 CAM 2 CAM 3 CAM 3 CAM 4 CAM 4 LOW BRIGHT LOUD HIGH 11
OPERATION Turn the MONITOR ON/OFF • Press and hold the POWER • Press and hold the POWER button on the side of the monitor to turn the monitor ON. button again to turn OFF the monitor. Pairing the Camera(s) and Monitor The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the devices do not automatically connect and transmit, you may do so manually.
OPERATION Placement of the Monitor The monitor can be used three different ways; placed on a tabletop, attached to your belt or mounted on the wall. • • • Set up the monitor on a tabletop by turning the belt clip DOWN and use the clip as a support stand. Carry the monitor on your belt by turning the belt clip UP on the back of the monitor and slide the clip over your belt. Hang the monitor from a screw on the wall using the screw mounting hole in the belt clip.
OPERATION Mounting the Camera on a Wall Safely: Before drilling the holes, it is important to check the reception and camera positioning in the intended location on the wall. Ensure you are hanging the camera no less than 3 feet away from baby’s crib. Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s reach at all times. 1.
OPERATION Night Vision The camera is equipped with Invisible IR (infrared) LEDs which keep the nursery dark. The LEDs are located on the front of the camera and allow you to see up to 15 feet in complete darkness so you can check on your baby at any time of night. The night vision LEDs will activate automatically when the Light Sensor on the front of the camera detects that the light levels are too low.
OPERATION Volume Use the VOLUME arrows (side) to increase/decrease/ mute the VOLUME. Nightlight 1. To turn the Nightlight ON/OFF, press the / until you see the OFF icon. 2. Use the VOLUME arrows (side) to select (MUTE) button ON. Note: Placing the monitor and camera too close together will create feedback. DECREASE or MUTE the volume and move the camera away from the monitor.
OPERATION Setting a lullaby Choose from five different lullabies to soothe your baby to sleep. 1. 2. 3. To select a lullaby, press the LULLABY button. Use the VOLUME arrows (side) to scroll through the 5 lullabies. To turn OFF the lullabies, press the LULLABY button. 1 Manual Screen OFF Another power saving feature allows you to turn the screen OFF without turning off the monitor. When sound is detected, the screen changes to live view. 1. 2. 3. 4. To turn the screen OFF, press the POWER button ONCE.
OPERATION Setting the Brightness Note: Low brightness levels reduce battery consumption and extends the battery life. Brightness Mode sets the brightness of the the screen. Brightness Mode also extends the battery life. 1. To set the Brightness Mode, press the / button until you see the icon. 2. Use the VOLUME arrows (side) to increase/descrease the brightness level. Using VOX (PEEP) Mode When in VOX (PEEP) Mode, the monitor enters standby/sleep mode after 1 minute of inactivity.
OPERATION Temperature Settings The ideal temperature for a baby’s room is between 16° - 20° Celcius or 61° - 68° Fahrenheit. Please set or adjust the room temperature accordingly. 1. To select a Temperature, press the / button until you see the 2. Use the VOLUME arrows (side) to select °C or °F. icon. Temperature Ranges You can preset alarms which will alert you to temperature changes in the room you are monitoring. An alarm will beep if the temperature drops below or goes above a selected temperature.
TROUBLESHOOTING ISSUE POSSIBLE SOLUTION Equipment does not function • • • Confirm that the camera and monitor are ON The battery may be depleted; charge battery The power adapters may not be properly connected No reception • • Camera and monitor may not be properly paired; follow PAIRING instructions Camera may be too far away from the monitor Reception Interference (static) • • • • The camera and monitor may be too far apart The battery power may be too low Other electronic devices may be interfe