RS35 Mobile Computer Android™ 10 Version 1.
Copyright © 2020 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of its owner; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development, this information may change without notice.
Important Notices IMPORTANT NOTICES FOR USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication.
RK25 Mobile Computer FOR PRODUCT WITH LASER This laser component emits FDA / IEC Class 2 laser light at the exit port. Do NOT STARE INTO BEAM DIRECTLY. Do not aim the beam at the eyes. Any adjustments or performance excluding those specified herein may result in hazardous laser light exposure. ENVIRONMENT Operate the mobile computer at ambient temperatures from -20 to 50 and with humidity range from 10% to 90%.
Important Notices SAFETY PRECAUTIONS Warning statement: A pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur. To prevent possible hearing damage, do not listen at high volume levels for long periods. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. For people’s safety Do not listen at high volume levels for long periods to prevent possible hearing damage.
RK25 Mobile Computer BATTERY The main battery may not be charged to full for shipment. Charge the main battery to full before using the mobile computer for the first time. Main battery: The main battery powers the mobile computer to work. It takes approximately 4 hours to charge an empty main battery to full. For the first time charging the main battery, please charge it for at least 8 to 12 hours.
Important Notices SCANNER Scan a 1D barcode 1) Open ReaderConfig and tap Scan Test on the menu bar. 2) Aim the scanning window at the barcode to read. Move the device, having the barcode located in the center of the scanning area. 3) Press any of the two side triggers. The scanning light beams to read the printed barcodes. The buzzer beeps after scanning. The scanning light goes off once the data is decoded, or when the decode timeout period has passed.
RK25 Mobile Computer CARE & MAINTENANCE This mobile computer is intended for industrial use. The mobile computer is rated IP65, however, damage may be done to the mobile computer if it is exposed to extreme temperatures or soaked in water. When the body of the mobile computer gets dirty, use a clean, wet cloth to wipe off dust and debris. DO NOT use bleaches or cleaners. Use a clean, non-abrasive, lint-free cloth to wipe dust off the LCD touch screen.
Canada, Innovation, Science and Economic Development Canada (ISED) Notices This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
CONTENTS IMPORTANT NOTICES ........................................................................................................... - 1 For USA .....................................................................................................................................- 1 For Product with Laser ..............................................................................................................- 2 Environment................................................................................
CONTENTS 2.3. 2.3.1. 2.3.2. 2.3.3. 2.3.4. 2.4. 2.4.1. 2.4.2. 2.4.3. Touch Screen .................................................................................................... 58 Screen Brightness ............................................................................................. 58 Screen rotation.................................................................................................. 59 Screen Timeout Settings ......................................................................
RK25 Mobile Computer WIRELESS RADIOS .............................................................................................................. 108 4.1. 4.1.1. 4.1.2. 4.1.3. 4.1.4. 4.1.5. 4.2. 4.2.1. 4.2.2. 4.2.3. 4.2.4. 4.2.5. 4.3. Use Wireless Local Area Network (Wi-Fi) ......................................................... 109 Connect to Wi-Fi Network ................................................................................ 109 Manually Add Wi-Fi Network....................................
Introduction INTRODUCTION The RS35 mobile computer, powered by Android 10, is light-weight, easy to use, providing powerful and handy tools for the purpose of delivering flexibility in customization. Specifically designed to work as an industrial PDA, it provides rich options of data collection, voice and data communication, long-lasting working hours, and so on. Its large color transmissive display guarantees ease in reading in all lighting conditions. Integrated with Bluetooth® Class II, V4.1 BLE, V2.
RK25 Mobile Computer FEATURES Built tough to survive drop test and sealed against moisture/dust to industrial standard IP65. Android 10 operating system with a powerful Qualcomm SDM450 Octa-core 1.8GHz CPU 32GB eMMC flash memory to store OS and software programs 3GB LPDDR3 RAM to store and run programs, as well as store program data One expansion slot for microSDHC card up to 32GB and microSDXC card up to 64GB2TB. Built-in autofocus 13 megapixels rear camera with LED flash.
Introduction RELATED DOCUMENTATION Log in to GoBetween to access related documentation about the RS35 mobile computer from the CipherLab Central Service (CCS) platform. Download the GoBetween desktop or mobile device application, or launch the GoBetween Lite web application from the following site: http://ccs.cipherlab.com/.
RK25 Mobile Computer Chapter 1 QUICK START This chapter helps you get ready for starting using the mobile computer. IN THIS CHAPTER 1.1 Overview ................................................................... 15 1.2 Charging & Communication ..........................................
Quick Start 1.1.
RK25 Mobile Computer No. Description No.
Quick Start 1.1.1. INSTALL/ REMOVE BATTERY For shipping and storage purposes, the mobile computer and the main battery are saved in separate packages. Note: Any improper handling may reduce the battery life. To install the main battery: 1) Insert a fully-charged main battery into the grooves from the battery top, and then press down the lower edge of the battery. The Battery Top Groove 1. Insert the battery from the top. 2. Press down the lower end.
RK25 Mobile Computer 2) Slide the battery latch leftward to “Lock” position. Slide leftward to “Lock” Unlock icon: The battery cover is now unlocked. Lock icon: The battery cover is currently locked. Warning: 1) Make sure the battery latch is at the “Lock” position before powering on the device. 2) For initial use, insert a charged battery, lock the battery cover in place, and then press the Power key to power on the mobile computer.
Quick Start REMOVE BATTERY To remove the battery: 1) Slide the battery latch rightward to unlock it. Slide rightward to “Unlock” 2) Once the battery cover is unlocked, it slightly tilts up and is ready to be removed. By holding the two sides of the battery cover, lift up the main battery (which is with the battery cover) from its lower end to remove it.
RK25 Mobile Computer 1.1.2. INSTALLING SIM CARD, SAM CARD AND MEMORY CARD The RS35 mobile computer is equipped with 2 SIM card slots, 1 SAM slot, and 1 memory card slot. To insert the cards: 1) Remove the battery as described in Remove Battery 2) Lift up the inner lid that protects the card sockets chamber by holding the pull tab. Lift up the inner lid from the pull tab.
Quick Start 3) After the chamber is revealed, insert SIM cards, the SAM card and the microSD card into their respective sockets. Close and push back the hinged cover till a click sounds. SIM 1 SAM SIM 2 MicroSD To Install the Cards: 1) Slide the hinged cover back. 2) Swing the top to open. 1. Slide the hinged cover. 2. Swing to open. 3) Insert the cards, close the hinged cover, and then push it back. 4. Slide the hinged cover to lock. 3. Close the hinged cover.
RK25 Mobile Computer REMOVE CARDS To remove the cards: 1) Remove the battery. 2) Lift up the inner lid. 3) Unlock the card hinge cover and remove the card. 4) Mount the inner lid and the battery cover, and slide the battery latch back to the “Lock” position Note: Both SIM1 and SIM2 card slots support 2G/3G/4G cards. However, you can have 3G/4G data transmission on either SIM but not on both at the same time.
Quick Start 1.1.3. POWER ON/OFF MOBILE COMPUTER POWER ON To power on the mobile computer, press and hold the power button located on the top end of the device. The mobile computer will turn on and show the Home Screen after splash screen. Power Button Note: For the mobile computer to power on, the battery cover must be secured in place. POWER OFF To power off the mobile computer, press and hold the power button for more than three seconds.
RK25 Mobile Computer 1.2. CHARGING & COMMUNICATION 1.2.1. CHARGE MOBILE COMPUTER The main battery may not be charged to full for shipment. When you first receive the kit package, you will need to charge the main battery to full before using the mobile computer. You may use the Snap-on Charging Cable or Charging & Communication Cradle along with a power adapter to charge the mobile computer. Your device can also be charged by connecting to a host computer using a USB Type-C cable.
Quick Start OPERATION ON BATTERY POWER When Bluetooth® Class II, V4.1 BLE, V2.1 with Enhanced Data Rate (EDR), IEEE 802.11 a/b/g/n/ac networking, GSM/UMTS/WCDMA/HSPA/HSPA+/LTE/VOLTE, and GPRS/EGPRS are all enabled on battery power, the main battery level will drop down substantially. Prolonged use of the display and continued scanning of barcodes will also affect battery level.
RK25 Mobile Computer 3) Push the Snap-on cup upwards to make its another side to be attached to the RS35 mobile computer. 4) A “click” sound is made once the Snap-on cable is connected with the bottom of the RS35 mobile computer in place. 5) Connect the USB plug to the approved adapter for external power connection, or plug it to the USB port of PC/laptop for data transmission/ charging. While the device battery is being charged, the LED on mobile computer will indicate charging status.
Quick Start USE CHARGING & COMMUNICATION CRADLE The Charging & Communication Cradle charges your mobile computer and a spare battery at the same time, and it could also be used for data communication.
RK25 Mobile Computer To charge your mobile computer on the Charging & Communication Cradle: 1) Remove the USB Type-C cable if it is connected with the RS35 mobile computer. 2) Insert the RS35 mobile computer onto the Cradle. The installed hard shell or hand strap is not necessary to be removed in advance before inserting the mobile computer. To remove, please take out the RS35 mobile computer directly.
Quick Start 4) Connect the adapter to the Cradle, and plug the other end into an electrical outlet.
RK25 Mobile Computer 1.2.2. WIRED DATA TRANSMISSION Use a USB Type-C cable or the snap-on Cable or the cradle to connect the mobile computer to your PC for data transmission. 1) Connect your device to the computer with a USB Type-C cable/ Snap-on Cable / Cradle. 2) Once connected, “USB Preferences” page shows up. By default, the device will be in charging mode with the status “No data transfer”, in which you are unable to access the files on this device from the PC client.
Quick Start To change the USB usage after you leave “USB Preferences” page, please swipe down from the status bar to reveal Notifications Drawer, and then tap on the system notification “USB file transfer turned on” (or other USB usage notification just like this) to enter “USB Preferences” to select the option you’d like to use USB for. 1.2.3. USING WIRELESS NETWORKS The mobile computer supports widely applied wireless technologies including Bluetooth® Class II, V4.1 BLE, V2.
RK25 Mobile Computer Chapter 2 USING RS35 MOBILE COMPUTER This chapter walks you through the fundamental usage and features of this device. IN THIS CHAPTER 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 Battery ...................................................................... 33 Memory ..................................................................... 46 Touch Screen.............................................................. 58 Notifications ...............................................................
Using RS35 Mobile Computer 2.1. BATTERY Main Battery The mobile computer is powered by a rechargeable 3.8V, 4020mAh Li-Polymer battery pack, and it takes approximately 4 hours to charge it to full from the power adaptor (for the first time charging the main battery, please charge it for at least 8 to 12 hours). However, the charging time may vary by your working condition. Spare Battery A spare battery pack is provided as an accessory.
RK25 Mobile Computer 2.1.1. BATTERY STATUS INDICATORS The main battery pack is the only power source for the mobile computer to work. Therefore, when the main battery level goes low, you need to replace the battery pack with a charged one or charge it as soon as possible. Most of all, you should backup important data on a regular basis. By checking the battery status icon on Status Bar, you can tell the battery level remaining in the main battery. Battery Icon Description Main battery is fully charged.
Using RS35 Mobile Computer The percentage beside the battery icon on the status bar can be switched on or off in App Drawer (All Apps) | Settings | Battery | Battery Percentage Note: When the mobile computer is fully charged and battery level reaches 100%, the battery icon will change from to to indicate charging is completed. Warning: (1) Once the battery level drops below 15%, the low battery notification will be displayed on the screen. (2) Data loss with RAM may occur when battery level is low.
RK25 Mobile Computer 2.1.2. MONITOR BATTERY LEVEL MAIN BATTERY LEVEL The main battery is the only source that feeds the mobile computer to work. It also supplies the backup battery on the main board in order to retain the data stored in DRAM. When main battery level gets low, recharge it or replace it as soon as possible. Most critically, back up the important data from time to time to protect your work.
Using RS35 Mobile Computer BATTERY SAVER MODE You can have the Battery saver mode automatically turned on when the main battery gets low. This mode will limit the use of location services, vibration and most background processing data. 1) On Battery screen, tap “Battery saver” to enter “Battery saver” page, and then tap on “Set a schedule”.
RK25 Mobile Computer By enabling “Turn off when fully charged” on “Battery Saver” page, the battery saver mode will be automatically off once the battery power is charged to be 90%. Tap on “TURN ON NOW” to directly enable battery saver function, and the battery icon on status bar will turn orange once this function is enabled. Also, you can swipe down from the status bar to reveal Quick Settings Panel or Quick Settings Menu, and tap the battery saver icon to enable/ disable it.
Using RS35 Mobile Computer BATTERY OPTIMIZATION With Battery optimization enabled for the applications, you can make sure they stay inactive when your device is idle or when they have not been used for days. 1) On Battery screen, tap on More and select “Battery usage”. 2) Tap on any item under “BATTERY USAGE SINCE FULL CHARFE” to enter its detail page. 3) tap on “Battery optimization”. 4) Tap on “NOT OPTIMED” to open the dropdown list and select “All apps”.
RK25 Mobile Computer 5) You can individually turn off the optimization mode of a certain app if you would like it always activated by tapping on the app name and select “Don’t optimize” and then “DONE”.
Using RS35 Mobile Computer LOW BATTERY ALERT The mobile computer prompts a warning notification reminding you to charge the main battery when the main battery level drops to 15% and 5%. Opening Notifications Drawer, you will also see this warning appearing on the notifications list; you may turn on Battery Saver Mode, connect the mobile computer to an external power source, or replace the main battery pack as soon as possible. To replace the main battery pack, see Replace Main Battery.
RK25 Mobile Computer 2.1.3. REPLACE MAIN BATTERY When main battery level is low, follow the steps below to replace the main battery. SHUT DOWN TO REPLACE THE MAIN BATTERY Shut the device down to replace the main battery, please: 1) Make sure the sub battery (backup battery) and the new main battery are fully-charged. 2) Press and hold the power button on the top end of the mobile computer. 3) Tap “Power off” in the pop-up menu. The mobile computer will power off.
Using RS35 Mobile Computer Note: (1) When main battery is removed, the system will stay in suspend mode for about 30 minutes. To prevent the system from being shut down without advance warning, please DO replace the main battery as soon as possible. (2) Backup battery keeps the mobile computer in suspension when the main battery is depleted. Thus, to prevent data loss, DO NOT replace the main battery when backup battery’s power is low.
RK25 Mobile Computer 2.1.4. POWER MANAGEMENT For any portable device, power management is a critical issue especially when you are on the road. Below are some tips to help you save battery power. Warning: Using backlight, wireless connectivity, and peripheral devices while on battery power will substantially reduce battery power. Bring an additional main battery pack with you on the road. End wireless connections (such as Bluetooth transmission, wireless connection, NFC and GPS) which are not in use.
Using RS35 Mobile Computer ENTER AIRPLANE MODE You can enable Airplane mode to have all the wireless radios (including call functions, data connections such as Bluetooth, Wi-Fi and 3G/4G) on your mobile computer turned off, which will considerably reduce the power consumption of your battery. To enter Airplane mode, please: 1) Swipe down from the top of the screen to open Quick Settings Menu. 2) Tap on the Airplane mode icon to enable/disable the mode.
RK25 Mobile Computer 2.2. MEMORY Flash Memory (ROM) 32GB flash memory for storing the OS (Android 10 and custom application programs). Random-access Memory (RAM) 3GB RAM for storing and running programs, as well as storing program data. Expansion Slot The mobile computer is equipped with one SD card slot which can accommodate a micro SD card, a microSDHC (up to 32GB) or a microSDXC (up to 64GB-2TB).
Using RS35 Mobile Computer 2.2.1. CHECK MEMORY USAGE The memory manager can offer a glance of how the device is using its RAM. ENABLE DEVELOPER OPTION To check the memory usage, you have to enable “Developer Option”: 1) Go to App Drawer (All Apps) | Settings |About Phone . 2) Tap on “Build number” 7 times to enable it. During the process, you’ll see a prompt with a countdown reading “You are now X steps way from being a developer.
RK25 Mobile Computer CHECK MEMORY USAGE Go to App Drawer | Settings | System | Developer option | Memory to enter memory manager screen. On the main screen, it tells you not only the used and free memory space of the RAM, but how your pattern of usage has impacted the device’s overall performance. To figure out how the system and apps have been taking up the memory over a longer period, tap the dropdown list to choose a different time span.
Using RS35 Mobile Computer 2.2.2. MANAGE STORAGE SPACE To your Android device, the SD card can serve as an extension of your device’s internal storage (which comes as 16 GB of flash memory to store the OS, applications and files) other than a portable storage place. Go to App Drawer | Settings | Storage to check usage of the internal and external storage spaces. By default, all the videos, photos and downloaded files are directly saved to the device’s internal storage.
RK25 Mobile Computer SD card as internal storage in Storage Settings page The SD card is used for storing anything on this device only, including apps and photos. Requires formatting that prevents it from working with other devices.
Using RS35 Mobile Computer SET UP SD CARD AS PORTABLE STORAGE Using SD card as a portable device allows you to treat it as a USB disk, by swapping it between your Android device and the computer to easily transfer files. This is quite handy when there is a need to offload files that are taking up too much storage space. When this device is connected with PC, the disk content is readable from PC client: On Storage screen, this disk can be managed separately.
RK25 Mobile Computer To start: 1) Insert the SD card. A notification icon indicating that an SD card is detected will be shown in the status bar; swipe down from the status bar and tap to set up. 2) Tap “Portable storage”, and complete the setting by tapping “DONE”. 3) Swipe down from the status bar to reveal Notifications Drawer, and you will find a notification indicating that the SD card is for transferring photos and media; tap “EXPLORE” to check its content.
Using RS35 Mobile Computer TRANSFER PHOTOS & MEDIA BETWEEN THE DEVICE & PC To transfer photos and media between this device and PC when the mounted SD card is set as portable storage, please: 1) Connect your mobile computer with PC with a USB Type-C cable/ the snap-on cable/ the cradle, and “USB Preference” page shows up. 2) Choose “File Transfer”, and now you will find the disk content is readable from PC client.
RK25 Mobile Computer CONVERT THE SD CARD TO INTERNAL STORAGE 1) You can always convert the SD Card from portable storage to internal storage. On Storage screen, tap the SD card. Before you start, make a backup of the files on this disk if you would like to keep them. 2) On SD card content screen, tap More and then tap “Storage settings”. 3) By selecting “Format as internal”, the device will eventually format this SD card into a specific file format only readable by this device.
Using RS35 Mobile Computer SET UP SD CARD AS INTERNAL STORAGE Using SD card as internal storage allows you to extend your existing device storage and to store huge applications. This SD card will be reformatted and encrypted with a file format that is not readable by another device. Therefore, it is essential that you back up important files on this SD card in advance.
RK25 Mobile Computer To start: 1) Insert the SD card. A notification will pop up indicating that an SD card is detected tap on “SET UP”. 2) Tap on “Phone storage”. 3) On the popup window, select “FORMAT SD CARD”. 4) You will then be asked to whether to move media files to this new SD card, tap to make your choice. 5) When the setting is completed, tap “DONE”. Note: It is recommended that you select “Move now” at Step 4 to have the device immediately start making use of SD card space.
Using RS35 Mobile Computer CONVERT THE SD CARD TO PORTABLE STORAGE 1) You can always convert the SD Card from internal storage to portable storage. On Storage screen, tap the SD card. Before you start, make a backup of the files on this disk if you would like to keep them. 2) On SD card content screen, tap More and then tap “Format as portable”. 3) Tap “FORMAT” to have this SD card re-formatted into a file type accessible by other devices. 4) When the formatting is completed, tap “DONE”.
RK25 Mobile Computer 2.3. TOUCH SCREEN The mobile computer comes with a 5.45 inch, transmissive IPS LCD, Corning® Gorilla® Glass 3 display with 720x1440 HD resolution. The LED backlight of the screen, which helps ease reading under dim environments, can be controlled manually and automatically. Warning: DO NOT use any pointed or sharp objects to move against the surface of the screen. 2.3.1. SCREEN BRIGHTNESS Go to App Drawer (All Apps) | Settings | Display | Brightness level.
Using RS35 Mobile Computer 2.3.2. SCREEN ROTATION By default, the device automatically rotates the screen to when you turn the device sideways. To switch this function on or off: 1) Go to App Drawer (All Apps) | Settings | Display 2) Tap Advanced for more display settings, and switch on or off Auto-rotate screen. OR swipe down from the top of the screen to open Quick Settings Panel or Quick Settings Menu and tap the Auto rotate icon to enable screen rotation.
RK25 Mobile Computer You can enter “Display” page to enable or disable screen rotation by long pressing the Auto rotate icon on Quick Settings Panel or Quick Settings Menu. HOME SCREEN ROTATION To enable Home screen rotation, please make sure Auto Rotation is enable. 1) Press any empty spot on Home screen. 2) Tap “Home Settings” and enable “Allow Home screen rotation”.
Using RS35 Mobile Computer REMOVE AUTO ROTATION FROM QUICK SETTING MENU You can remove the Auto rotate switch icon on Quick Settings Menu to minimize the possibility of accidentally turning on the auto-rotation function: 1) Swipe down from the top of the screen to open Quick Settings Menu. 2) Click Edit button to get into Edit page; tap on and hold the Auto rotate icon, and drag it to the “Drag here to remove” area and then release it.
RK25 Mobile Computer REMOVE AUTO ROTATION FROM DISPLAY SETTINGS Go to App Drawer (All Apps) | Settings | Accessibility and switch off Auto- rotate screen. By doing so, the auto-rotation option will be hidden in Settings Display | . Step 1: Step 2: Step 3: The original “Display” page where the function “Auto-rotate screen” is listed on. Switch off “Auto-rotate screen” on “Accessibility” page. Now the function “Auto-rotate screen” is hidden on “Display” page.
Using RS35 Mobile Computer 2.3.3. SCREEN TIMEOUT SETTINGS Go to App Drawer (All Apps) | Settings | Display Select the time lapse for screen timeout. 63 | Screen timeout.
RK25 Mobile Computer 2.3.4. TEXT SIZE & DISPLAY SIZE Go to App Drawer (All Apps) | Settings | Display Tap the small A icon to select the font size between Small, or the large A icon | Font size. Default, Large and Largest. Go to App Drawer (All Apps) | Settings Tap the plus icon or the minus icon | Display | Display size. to select the display size as Small or Default.
