Terminal 8200/8230/8260 Version 1.
Copyright © 2009~2011 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice.
FOR USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
If you only transfer data to the host wirelessly, please keep the minimum distance 20 cm between machine & your body. FOR PRODUCT WITH LASER CAUTION This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not stare into beam. SAFETY PRECAUTIONS RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1.00 Mar.
CONTENTS IMPORTANT NOTICES ................................................................................ - 2 For USA .............................................................................................. - 3 For Canada.......................................................................................... - 3 For Hand-held Product with RF Functions ..................................................... - 3 For Product with Laser ...................................................................
200 Series Mobile Computer Reference Manual 1.8 SD Card 1.8.1 File System 1.8.2 Directory 1.8.3 File Name LEARNING SOFTWARE ARCHITECTURE ............................................................. 27 2.1 Application Module 2.1.1 FORGE Application Generator (AG) 2.1.2 MIRROR Emulator (CipherNet) 2.1.3 User Program 2.2 System Configuration & Core 2.2.1 System Menu 2.2.2 Kernel 2.2.3 Program Manager SPECIFICATIONS.........................................................................................
INTRODUCTION Answering industrial demands for ruggedized, light-weight and versatile computers, the 8200 Series Mobile Computer is specifically designed for enterprise logistics use. This line of product comes with built-in Bluetooth technology and allows for optional module for 802.11b/g connectivity, enabling real time sharing of performance.
8200 Series Mobile Computer Reference Manual GETTING FAMILIARIZED WITH 8200 Figure 1: Overview No. Description No.
錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 FEATURES Ergonomic design — ruggedized yet streamlined, with wristband for secure hold Built tough to survive drop test and sealed against moisture/dust to IP 52 Up to 8 GB high capacity memory card (microSDHC) supported Flexible wireless solutions — Bluetooth or 802.11b/g FTP client support — 802.
8200 Series Mobile Computer Reference Manual ACCESSORIES Rich choices of optional accessories are available for you to enhance the total performance of the mobile computer. Pistol Grip (detachable) Spare rechargeable Li-ion battery GETTING STARTED INSERTING BATTERY & MEMORY CARD For shipping and storage purposes, save the mobile computer and the main battery in separate packages. This will keep both batteries in good condition for future use. Note: Any improper handling may reduce the battery life.
錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 Note: For a new battery, make sure it is fully charged before use. Always prepare a spare battery pack, especially when you are on the road.
8200 Series Mobile Computer Reference Manual Unlock Lock Figure 2: Installing the Main Battery & Memory Card 6
錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 INSTALLING PISTOL GRIP This contoured pistol grip enables intuitive trigger-and-scan operation, which is very helpful in scan intensive applications. When a pistol grip is necessary, install it to the mobile computer by following these steps: 1) Hold the mobile computer still and slide the release latch to the right to unlock the battery cover. 2) Slide off the battery cover. 3) Insert the pistol grip into place (is like replacing the battery cover).
8200 Series Mobile Computer Reference Manual INITIAL CHARGING The main and backup batteries may not be charged to full for shipment. When you first receive the package, you will need to charge the main battery to full before using the mobile computer. Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It is recommended to charge the battery at room temperature (18°C to 25°C) for optimal performance. For initial charging, it takes approximately 2.
Chapter 1 USING 8200 MOBILE COMPUTER This chapter explains the features and usage of the 8200 Series Mobile Computer. The 8200 family includes: 8200 8230 8260 Batch type Bluetooth Class 2 + 802.11b/g Bluetooth Class 2 IN THIS CHAPTER 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Battery ....................................................................... 9 Memory .................................................................... 11 Keypad.....................................................................
8200 Series Mobile Computer Reference Manual 1.1.2 BACKUP BATTERY The backup battery on the main board takes charge when the main battery is removed or drained out. When fully charged, the 3.0 V/18 mAh rechargeable Lithium button cell helps retain data in SRAM and maintain the running of the real-time clock and calendar for at least 25 days without the main battery. In the meantime, you have to replace the main battery as soon as possible. It takes at least 72 hours to fully charge the backup battery.
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 1.2 MEMORY The collected data can be sent back to a host computer immediately over wireless networks, or stored in memory (SRAM) and upload later. The mobile computer is equipped with a calendar chip for accurate time/date logging.
8200 Series Mobile Computer Reference Manual 1.3 KEYPAD The mobile computer is equipped with a keypad of 24 keys for system setup, user entry and so on. The keypad comes with programmable LED backlight, like the screen. Refer to 1.4 LCD for screen & backlight settings. Silicon rubber has been chosen for their durability and prompt feedback. The key click can be configured through programming or via System Menu. Refer to 錯誤! 找不到參照 來源。. 1.3.
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 This alphanumeric keypad is set to numeric mode by default. The [Fn α] key serves as a toggle among numeric, alpha (lower-case alphabetic), and ALPHA (upper-case alphabetic) input modes, as well as function mode. Note: It is not necessary to hold down the [Fn α] key. The associated icon will appear on the lower-left corner of the screen in a sequence as shown below.
8200 Series Mobile Computer Reference Manual Below briefly describes the functions of common keys on the mobile computer. SCAN The yellow key is used to work as the ENTER key by default. When the reader function is enabled, this yellow key is set to trigger the scan engine so that it can read a barcode. ENTER The two keys on each upper side of the SCAN key are user-friendly and convenient for either right-handed or left-handed operator. Normally, it is used for command execution or input confirmation.
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 Backlight Configuration Key This key is used to turn ON/OFF the backlight of the LCD and keypad. Also, while pressing [ ], the navigation keys can be used to adjust the luminosity and contrast of the screen backlight. Key Description [ ] + [Right] Press these keys at the same time to increase the contrast. [ ] + [Left] Press these keys at the same time to decrease the contrast.
8200 Series Mobile Computer Reference Manual 1.4 LCD The mobile computer comes with a FSTN graphic LCD, 160 by 160 pixels resolutions, which can be programmed to display text or graphics, such as specific font and company logo, to meet varying application needs.
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 1.5 NOTIFICATIONS 1.5.1 STATUS LED There are two dual-color LED indicators above the screen. Both can be programmed to provide information that helps diagnosing. For example, if you are using AG runtime, you will be informed of the scanning result immediately. LED1 is used for "Good Read" and will become solid green upon reading a barcode successfully. LED1 is used to provide information on the charging status and barcode decoding.
8200 Series Mobile Computer Reference Manual LED1: Red/Green Red Green User Power ON User definable User definable Power Off, Battery System default Charging Flashing red: Charging Charging Error Solid green for Good Read by default System default Flashing green: Charging done System default Flashing red and green: Charging error occurs LED2: Blue/Green Blue Green Bluetooth System default --- Wi-Fi Flashing blue, quickly: Waiting for connection or connecting Flashing blu
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 1.6 DATA CAPTURE A wide variety of scan engines is available for delivering flexibility to meet different requirements. Depending on the scan engine integrated, the mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by default while running the preloaded AG runtime. Refer to 3.3.1 Reader for functional test.
8200 Series Mobile Computer Reference Manual Chinese 25 Code 3 of 9 Disabled Coop 25 Disabled Code 39 Enabled Trioptic Code 39 Enabled Disabled Italian Pharmacode (Code 32) Disabled French Pharmacode Disabled EAN-8 Enabled Enabled EAN-8 Addon 2 Disabled Disabled EAN-8 Addon 5 Disabled Disabled EAN-13 Enabled Enabled EAN-13 & UPC-A Addon 2 Disabled Disabled EAN-13 & UPC-A Addon 5 Disabled Disabled Bookland EAN (ISBN) Disabled Disabled UPC-E0 Enabled Enabled UPC-E1 Disabl
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 1.7 CHARGING & COMMUNICATIONS Normally, the mobile computer ships with a USB cable for charging and communications.
8200 Series Mobile Computer Reference Manual 1.7.1 INTERFACE CABLE OPTIONS For charging via the USB cable, the standard charging current is 500 mA. However, we recommend you to connect the power adaptor to speed up charging the battery. If you connect the mobile computer to a USB hub, the charging current may be insufficient. In that case, change the charging current to 100 mA after connecting the USB cable. It will take a longer time to charge to full. Refer to 錯誤! 找不到參照來源。.
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 1.8 SD CARD SD card can be accessed directly by using the provided functions in user application. Yet, when 8200 is equipped with SD card and connected to your computer via the USB cable, it can be treated as a removable disk (USB mass storage device) as long as it is configured properly through programming or via System Menu | 8. Next Page | 1. SD Card Menu | 1. Run As USB Disk. Refer to 錯誤! 找不到參照來源。.
8200 Series Mobile Computer Reference Manual \BasicRun BASIC Runtime Store DAT and DBF files that are created and accessed in BASIC runtime to this folder.
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 DAT Filename DAT file #1 TXACT1.DAT DAT file #2 TXACT2.DAT DAT file #3 TXACT3.DAT DAT file #4 TXACT4.DAT DAT file #5 TXACT5.DAT DAT file #6 TXACT6.DAT DBF Filename DBF file #1 DBF file #2 DBF file #3 DBF file #4 DBF file #5 Record file F1.DB0 System Default Index F1.DB1 Index file #1 F1.DB2 Index file #2 F1.DB3 Index file #3 F1.DB4 Record file F2.DB0 System Default Index F2.DB1 Index file #1 F2.DB2 Index file #2 F2.
8200 Series Mobile Computer Reference Manual \AG\DBF \AG\DAT Application Generator (a.k.a. AG) Store DAT, DBF, and Lookup files that are created and/or accessed in Application Generator to this folder. \AG\EXPORT \AG\IMPORT 1.8.3 FILE NAME A file name must follow 8.3 format (= short filenames) — at most 8 characters for filename, and at most three characters for filename extension.
Chapter 2 LEARNING SOFTWARE ARCHITECTURE This chapter mainly describes the software inside the mobile computer. It consists of three modules — Kernel, System, and Application; each has a function menu. When a menu is displayed, you may select an item by either of the following ways: Press the arrow keys [Up] and [Down] to move the highlight bar. Press the number key that corresponds to the item number.
8200 Series Mobile Computer Reference Manual Figure 7: Software Architecture IN THIS CHAPTER 2.1 Application Module ..................................................... 29 2.2 System Configuration & Core .......................................
Chapter 2 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 2.1 APPLICATION MODULE The mobile computer ships with software package on the CD-ROM. It includes FORGE Application Generator (batch and WLAN versions), MIRROR Emulator (VT and 5250 versions), download utilities, etc. 2.1.1 FORGE APPLICATION GENERATOR (AG) For easy development of applications, the mobile computer is preloaded with AG runtime. When you turn on the mobile computer, it displays the Main Menu of AG application, as shown below.
8200 Series Mobile Computer Reference Manual 2.1.2 MIRROR EMULATOR (CIPHERNET) The mobile computer supports VT100/220 and IBM 5250 terminal emulation for accessing a backend database. Instead of using FORGE Application Generator, you may download the terminal emulation program, i.e. CipherNet Runtime, to the mobile computer. Refer to 錯誤! 找不到參照來源。. Then, run individual companion tool on your computer. For details on the MIRROR Emulator application, please refer to separate user manuals.
Chapter 2 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。 2.2 SYSTEM CONFIGURATION & CORE For managing system configurations and multiple programs, each mobile computer comes with System Menu, Program Manager, and Kernel Menu. Refer to the following chapters on how to configure the 8200 Series Mobile Computer, regarding system configurations and program download. 2.2.1 SYSTEM MENU System Menu is bundled with BASIC Runtime or user programs that are written in “C”.
SPECIFICATIONS Model Designation 8200 8230 8260 Wireless Communications Bluetooth Class 2 − √ √ 802.11b/g − √ − Readers Barcode Reader CCD (linear imager) Electrical Characteristics 2D Imager Main Battery Rechargeable Li-ion battery – 3.
8200 Series Mobile Computer Reference Manual Environmental Characteristics Enclosure Material Rubber & ABS plastic Dimensions CCD: 136 mm (L) 58 mm (W) 25 mm (H) Laser/2D: 136 mm (L) 58 mm (W) 32 mm (H) Weight Approx. 150 g (Laser, battery included) Temperature Operating: -10 °C to 60 °C Storage: -20 °C to 70 °C Charging: -10 °C to 40 °C Operating: 10% to 90% non-condensing Storage: 5% to 95% non-condensing Humidity Impact Resistance 1.
