2560 Bluetooth Scanner 2500 BT BASE Bluetooth Scanner Cradle Version 1.
Copyright © 2016 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice.
IMPORTANT NOTICES FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FOR HAND-HELD PRODUCT WITH RF FUNCTIONS The 2560 unit (FCC ID: Q3N-2560) complies with FCC radiation exposure limits set forth for uncontrolled environment. The 2500 BT BASE unit (FCC ID: Q3N-25BTBASE) complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. It only operated in hand-held used.
When the scanner resumes its work, make sure the battery is fully charged before use. Keep the scanner away from any magnets and magnetic fields to prevent the laser engine from malfunctioning. If you shall find the scanner malfunctioning, write down the specific scenario and consult your local sales representative. RELEASE NOTES Version Date Notes 1.00 Jul.
CONTENTS IMPORTANT NOTICES ......................................................................... - 3 fcc statement ..................................................................................... - 3 Canada STATEMENT ........................................................................... - 3 For Hand-held Product with RF Functions ............................................... - 4 For Product with Laser ........................................................................
INTRODUCTION CipherLab’s 2560 Series Barcode Scanners are specifically designed to answer your mobile demands. The versatile scanners are designed to help accelerate productivity while lowering the total cost of ownership. Intensive data collection jobs are made easier with fast, accurate barcode scanning in various working environments, especially in small businesses.
2560 Series Barcode Scanner User Guide GETTING FAMILIARIZED WITH THE SCANNER AND THE CRADLE INSTALLING THE BATTERY TO THE SCANNER When you first receive the package, the rechargeable battery is stored separately from the scanner. Insert the battery into the scanner first so that it can be charged when sitting in the cradle. Note: Any improper handling may reduce the battery life. 1) Insert the battery into the battery compartment and close the battery cap.
SETTING UP THE CRADLE Capable of charging the scanner, the cradle is specifically designed for the scanner to communicate with a host computer wirelessly. The connection between the scanners and the cradle is made easy and reliable. Two LED indicators are provided for power and communications status. Meaning Power LED Red, solid --- Red, flashing --- Charging error Charging (On/Off ratio 0.5:0.
2560 Series Barcode Scanner User Guide --- Blue, flashing Wait for connection request from the scanner (Slow flash at 0.5 Hz) --- Blue, flashing Connected with the scanner (Fast flash at 1 Hz) Red, solid Blue, flashing Failed to send data to host via USB Virtual COM (Fast flash at 1 Hz) Red, flashing --- Enter Download Mode CHARGING THE BATTERY VIA THE CRADLE The battery may not be charged to full for shipment.
CHARGING THE BATTERY VIA CHARGER The battery charger is provided for charging the battery only. You may purchase the charger separately. It takes approximately 3 hours to charge the battery to full. Note: Battery charging stops when the temperature drops below 0°C or exceeds 40°C. It is recommended to charge the battery at room temperature (18°C to 25°C) for optimal performance. 1) Slide the battery smoothly until the latch rises to secure it. 2) Connect the power supply cord to the charger.
2560 Series Barcode Scanner User Guide INSIDE THE PACKAGE The items included in the package may be different, depending on your order. Save the box and packaging material for future use in case you need to store or ship the scanner.
SPECIFICATIONS Optical Characteristics 2560 Scan Engine Non-contact type Optical Sensor CCD Light Source Visible red LED RF Characteristics WPAN Module Wireless PAN BT Class 2 compliance Coverage (line-of-sight) 100 meters with the cradle Interface Supported Serial Port Profile (BT SPP) 10 KB for transmit buffer Human Interface Device Profile (BT HID) Cradle Physical Characteristics Memory 4 MB flash for memory mode Switch Tactile switch Indication Triple-color LED (Red/Gre
2560 Series Barcode Scanner User Guide Electrical Characteristics Battery Rechargeable Li-ion battery – 3.7 V, 800 mAh Power Adaptor Input AC 100~240 V, 50/60 Hz Output DC 5V, 1A (Cradle) DC 5V 1A (Battery Charger) Operating Temperature 0 °C to 40 °C Environmental Characteristics Temperature Humidity (Non-condensing) Operating 0 °C to 50 °C Storage -20 °C to 60 °C Operating 10% to 90% Storage 5% to 95% Resistance Impact Resistance 1.
