DVP650 User's Manual DVD Player TM
Content Introduction Safety Precautions 2 Important Safety Instructions 3 Caution 5 Features 6 Front Panel and Rear Panel Illustration 7 Remote Control 8 Connections Connecting to a TV set 9 Connecting to an AV Receiver with 2 Channel Analog Audio Input 10 Connecting to an AV Receiver with Digital Audio Input 11 Basic Playback 12 Basic Operation Advanced Features Modes and Features Setup 13 Remote Control Operation 19 MP3 Playback 28 KODAK Picture CD playback 29 Other Troublesho
Safety Precautions Introduction CAUTION: CAUTION THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE. RISK OF ELECTRIC SHOCK DO NOT OPEN IF THE UNIT REQUIRES SERVICING, CONTACT THE SELLER OR OUR SERVICE CENTER-SEE "TROUBLESHOOTING".
Important Safety Instructions Introduction 1. Read Instructions 10. Ventilation All the safety and operating instructions should be read before the product is operated. All warnings on the product and in the operating instructions should be adhered to. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.
Important Safety Instructions Introduction 15. Outdoor Antenna Grounding 20. Servicing If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Caution Introduction Please use the original box and packing materials for safe transportation of this product. It is normal for the cover and rear panel to become warm after the player has been operating for an extended period of time. Do not move this product during playback. Doing so may cause damage to the pickup and the disc. Press OPEN/CLOSE on the front panel or remote to open or close the disc tray. Do not push or touch the tray while it is opening or closing.
Features Introduction Full compatibility with DVD, SVCD, VCD, CD, MP3 and Kodak Picture CD on CD-R & CD-RW (finalized) Screensaver Multiple playback modes: Program, Search, 10-Second Review Dynamic spectrum display and 6 adjustable frequency bands Coaxial digital audio output Dolby Digital and DTS 2 Channel outputs S-video, composite video and component video outputs Disc formats supported by this player: Digital Theater System MP3 files on CD-R/CD-RW Dolby Digital 9 Multi-angle KODAK picture CDs A
Front Panel and Rear Panel Illustration Introduction Front panel disc tray open/close DVD CD MP3 PLAYER DVP650 stop power power indicator Rear panel component video output composite video output 2 channel audio output R Y CB VIDEO L CR AUDIO VIDEO S-VIDEO COAXIAL AUDIO VIDEO s-video output digital coaxial output -7- pause play previous next
Remote Control Introduction POWER 1 OPEN/CLOSE POWER 2 OPEN/CLOSE OSD/SETUP 5 OSD/SETUP 3 SEARCH 0-9 keys 6 SEARCH CLEAR 7 CLEAR VOL/CH REW FF 4 VOL/CH STOP PLAY 10 STOP NEXT/ 8 FORWARD SCAN 9 PREVIOUS/ REVERSE SCAN 14 PLAY 11 OK 12 NAVIGATION ARROWS PAUSE/ STEP MENU/ RETURN 15 MENU/RETURN 13 PAUSE/STEP TITLE EQUALIZER A-B PLAY MODE 16 TITLE 18 PLAY MODE 19 EQUALIZER 17 A-B ZOOM ANGLE SUBTITLE AUDIO 20 ZOOM 22 AUDIO 21 ANGLE 23 SUBTITLE TM Note: 1.
Connecting to a TV Set R Connections Y CB VIDEO L AUDIO CR VIDEO S-VIDEO COAXIAL AUDIO VIDEO Composite video RED YELLOW WHITE VIDEO IN Component video VIDEO S-VIDEO VIDEO IN AUDIO IN L R Notes: There are three ways of connecting the player's AV output to the TV set: 1. S-video cable and left/right audio cable [set the (Video Type) to (S-Video)].(See page 16) 2. Composite video cable and left/right audio cable. 3.
Connecting to an AV Amplifier with 2 Channel Analog Audio Input R Connections Y CB VIDEO L AUDIO RED CR S-VIDEO COAXIAL VIDEO AUDIO VIDEO WHITE YELLOW VIDEO IN VIDEO Receiver VOLUME INPUT SELECTOR POWER BYPASS PRO LOGIC 3 STEREO MODE TEST CHANNEL KARAOKE MUTE UP DOWN BASS 1 MIC 2 1 MIC VOL 2 MIC TREBLE EXCITE DVD IN L white R red Notes: 1. Set the TV to the AV input connected to the DVD player. 2. Set the receiver to the AV input connected to the DVD player.
Connecting to an AV Amplifier with Digital Audio Input R Connections YELLOW Y CB VIDEO L CR AUDIO S-VIDEO COAXIAL VIDEO AUDIO VIDEO VIDEO IN Coaxial cable VIDEO Coaxial Receiver VOLUME INPUT SELECTOR POWER BYPASS PRO LOGIC 3 STEREO MODE TEST CHANNEL KARAOKE MUTE UP DOWN BASS 1 MIC 2 1 MIC VOL 2 MIC TREBLE ECHO EXCITE Notes: 1. Select the Coaxial digital audio output. 2. Set the player's audio out to Bitstream or PCM mode (see page 16). 3.
Basic Operation Basic Playback Preparation before playing: 1. Connect the DVD player to your TV and amplifier. 2. Turn on the TV. 3. Set the TV to the AV input connected to the DVD player. 4. Turn down the volume on your amplifier, and then power it on. 5. Set the amplifier to the AV input connected to the DVD player. DVD CD MP3 PLAYER DVP650 STEP 1 - Press POWER to start the player. The DVD logo appears on the TV screen. STEP 2 - Press OPEN/CLOSE either on the front panel or remote control.
Modes and Features Setup Advanced Features ON SCREEN DISPLAY (OSD)/SETUP 5 In stop mode, press OSD/SETUP, and the TV screen will display the Setup Menu as follows: Language Video Audio Rating Other Press to change items Setup Menu A. Press OK to display each submenu B.
Modes and Features Setup Advanced Features Language Setup Select [Subtitle], and press OK or to display the [Subtitle] submenu: Language Video Audio Rating Other Menu/OSD English Subtitle English English Audio English French Disc Menu English Spanish Auto OSD On Auto Press to change your selection Note: Subtitle languages vary by disc. Off A. Press OK to confirm B.
Modes and Features Setup Advanced Features Video Setup Select [Video] in the Setup Menu,and pr ess OK to display the [Video] sub menu : Language Video Press to select the menu Audio Rating TV Display Full Screen Video Out S-Video Other item A . Press OK or to set B.
Modes and Features Setup Advanced Features Video Setup Select [Video Out], and press OK or to display the [Video Out] submenu: Language Video Audio Rating TV Display Full Screen Video Out S-Video Other S-Video Y Cb Cr A. Press OK to confirm Press to change your selection B. Press OSD/SETUP to exit the Setup Menu [S-Video]----S-video output [YC b C r ]----Component video output Note: The Composite video output is always available.
Modes and Features Setup Advanced Features Audio Setup [PCM]----Digital audio output in PCM (pulse code modulation) format; use for stereo or CD playback. [Bitstream]----Digital audio out in original format; use if you connect to an A/V receiver with a Dolby Digital or DTS decoder. [Off]----No digital audio out. Rating Setup Select [Rating] in the Setup Menu, and press OK to display the [Rating] submenu: Language Video Press to select the menu Audio Password ---- Rating 8.
Modes and Features Setup Advanced Features Other Setup items Select [Other] in the Setup Menu, and press OK to display the [Other] submenu: Language Video Press to select the menu Audio Rating Screen Saver On Auto Power Off On Background Green A . Press OK or to set Other item B.
Remote Control Operation Advanced Features POWER During playback, press POWER to stop the player and return to standby mode. While the player is in standby, press POWER or any key on the front panel to resume normal operation. 1 OPEN/CLOSE To open the disc tray, press OPEN/CLOSE. To close the disc tray, press OPEN/CLOSE again. 2 0-9 keys These keys are used to input the time, as well as title, chapter and track numbers.
Remote Control Operation Advanced Features VOL/CH 4 Press VOL/CH, and the [Channel/Volume] menu will display as follows: Channel/Volume Press to select the menu Volume Channel Mix item Select [Volume], the screen will display as follows: Channel/Volume Volume Channel Press Mix Press VOL/CH again to exit the menu. Select [Channel] , the screen will display as follows : Channel/Volume Volume Channel Mix Stereo Left Right A. Press OK repeatedly to change the selection B.
Remote Control Operation Advanced Features OSD/SETUP 5 During playback, press OSD/SETUP to display the current time counter position. 0:04:45 Elapsed time of the current track/chapter Press OSD/SETUP again to display additional information about the playing disc. CD Disc type VCD SVCD VCD Track 1/15 0:04:45 Elapsed time of the current track Total tracks Current track DVD Disc type Current title Audio type Subtitle DVD Title 1/10 Chapter 2/20 Audio 1 Eng Subtitle 1 Eng 0:04:45 Angle 2/2 5.
Remote Control Operation Advanced Features SEARCH 6 During playback, press SEARCH, and the [Track Search] menu will display as follows: CD VCD SVCD 0:28:08 Track Search Time -:--:-- DVD Search 0:28:08 Notes: Time searches for an exact time in the movie. Time -:--:-- Title -- enter a value outside the range of the Chapter -- total number of titles or chapters. In Title/Chapter mode, you cannot For some DVD discs, the Search function is unavailable.
Remote Control Operation FF 8 Advanced Features During DVD,are CDused or VCD playback, press once to play These keys to input the time, asFF well as title, chapter and track numbers. the next chapter, title or track. During CD or VCD playback,on press holdpress FF tothe 0-9 keys to When aDVD, numeric item is displayed the and screen, select the desired ENTER scan forward. Theentry, playerand willpress cue the disc atto2,confirm.
Remote Control Operation Advanced Features PLAY Press PLAY from stop mode to start playback. Press PLAY during playback to replay the last 10 seconds. This function is not available if the elapsed time of current track is less than 10 seconds. 14 Note: MP3 discs and some DVD discs do not have a 10 second review feature. MENU/RETURN 15 During DVD, VCD or SVCD playback (with PBC on), press MENU/RETURN to return to the program menu.
Remote Control Operation Advanced Features PLAY MODE 18 Press PLAY MODE to display the [ P lay M ode] menu: VCD DVD SVCD Play Mode CD Play Mode Repeat Off Repeat Off Program Off Program Off PBC On Press Select [Repeat], and press OK or VCD SVCD to select the menu item to display the [Repeat] submenu: DVD CD Play Mode Play Mode Repeat Off Off Program Off Single PBC On All Repeat Off Off Program Off Chapter Title Press to change your selection A.
Remote Control Operation Advanced Features While [Program] is on, press OK to display the [Program] submenu: CD VCD SVCD Play Mode 1 __ 4__ 7__ 10 _ _ 2__ 5__ 8__ 11 _ _ 3__ 6__ 9__ 12 _ _ << Input the track numbers in the order you would like them to play. When finished, select [Play] and then press OK to play the tracks in the new programmed order. Select [Clear All] and press OK to clear all the numbers you have input. Select [<<] and press OK to return to the [Play Mode] menu.
Remote Control Operation Advanced Features ZOOM 20 During VCD/SVCD/DVD playback, press ZOOM to magnify the image as follows: Q1 Q2 Q3 Q Off ANGLE 21 During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. AUDIO 22 During DVD playback Press AUDIO repeatedly to select from up to 8 audio languages/formats.
MP3 Playback Advanced Features Supported formats Disc format: ISO 9660, Joliet Music file formats: Mp3 MP3 bit rate (data rate): 32-192kbps Total number of music files and albums: around 350 per disc Sampling rate: (CBR) 32kHz/44.
Kodak Picture CD Playback Advanced Features The introduction of KODAK Picture CD A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking the box on the photofinishing envelope when you drop off a roll of film (35 mm or Advanced Photo System (APS) color print film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign.
Kodak Picture CD Playback Advanced Features Zoom Function: This player provides both Zoom in/out and Zoom pan function. Press the ZOOM consecutively, the picture will zoom in/out in turn as followings: Note: During the ZOOM function, slideshow transitions and image rotation are disabled. Q off: close zoom, press PLAY again to resume slideshow transition mode. Q1, Q2, Q3: zoom in; Q4, Q5: zoom out Digest function Press the MENU/RETURN to enable the function.
Troubleshooting Other If you have any questions, please consult the troubleshooting guide below. If you cannot solve the problem, please contact our customer support department at 480-922-0896 or via e-mail at customersupport@sonicblue.com. NO PICTURE OR SOUND "BAD DISC" DISPLAYED Ensure the power button is on. Ensure the disc is not warped, damaged or deformed. Ensure the power outlet is operational. Ensure the disc is not badly stained or damaged. Ensure the power cord is not damaged.
Specifications Other Power requirements: 110-240V, 50/60Hz Power consumption: 25W Video standard: NTSC Unit Weight: 6.4 Lbs (2.9kg) Unit Dimensions: 16.5in(W) x 12.0in(D) x 2.2in(H) (product),(418mm(W) x 305mm(D) x 55mm(H)) Video out Video out: 1.0V(p-p)/75 , sync, negative polarity, RCA pin Jack x 1 S-video output connector(separate Y C signal output connector): Y output: 1.0V(p-p)/ 75 , sync, negative polarity C output: 0.286 V(p-p)/75 4 pin mini DIN x 1 Audio out Analog out: 1.
Remote Control Preparation Other Using the remote control Insert batteries 1. Open the cover. 1 Point the remote control at the remote sensor. (The pictures below are for reference only.) DVD CD MP3 PLAYER DVP650 2. Insert batteries. 2 30 o o 30 Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 3 3. Close the cover. Notes: Improper use of batteries may cause battery leakage and Remarks: Do not expose the remote sensor of the DVD corrosion.
1 3 4 VOL/CH TITLE ZOOM REW 8 STOP PLAY 9 10 11 14 12 PAUSE/ STEP MENU/ RETURN 13 15 16 A-B ANGLE EQUALIZER SUBTITLE OPEN/CLOSE 2 OSD/SETUP 5 SEARCH 6 CLEAR 7 FF 18 17 AUDIO 19 20 22 21 23 TM To prevent children from watching inappropriate content on this player, please be sure to set the rating in the Setup menu. Before you set this rating, the password must be unlocked. If you forget your unique password, please use the universal password as set by the manufacturer ("0106").