Product Info

RF-Panic-One-Button-319-NN – Wireless Panic
RF-PANIC-One-Button-319-NN Rev.3 Mar 2019
Description
The RF-Panic-One-Button-319-NN is a
wireless handheld or mounted device that
when pressed sends a wireless signal to the
alarm panel.
The panic sensor can be used as a police,
medical or auxiliary alarm activation. The
sensor is powered by a replaceable 3-VDC,
lithium coin-cell battery.
Battery Tab
Programming
Pull out battery tab for
operation.
Note: Tighten bottom
screw after removing
battery tab
General Information
The RF-Panic-One-Button-319-NN is a
lithium battery powered operated panic
device for an alarm system. The Panic
provides the user: (specific programming
required for operation)
• Police alarm sounds.
• Medical reporting.
• Silent alarm reporting.
• Auxiliary (local only sounds).
Note: In programming, the sensor should be
enrolled in a supervised group, this
maintains integrity between the panel and
device.
Accessories
The RF-Panic-One-Button-319-NN includes
the following:
RF-Panic-One-Button
Belt Clip
Lanyard Clip
Manual
Mounting Bracket
The following steps describe the general
guidelines for programming the sensor into
panel memory. Refer to the specific panel’s
documentation for complete programming
details.
1. Enter panel learn-in/enrollment mode.
2. Select sensor number
3. Select sensor type (specific for panel
type)
4. When the panel request sensor
activation, Press the Panic button.
5. Exit program mode.
Testing and the Sensor
Sensor should be tested for both operation
and range.
Operational Testing
• Press the panic button, the specific
alarm sound should immediately
sound.
• Disarm the system to silence the
alarm.
Wireless Testing
Wireless testing provides a baseline for the
distance the panic will operate away from
the control panel.
• Enter dealer sensor test at the
control panel.
• Press the panic and verify panel
acknowledgement.