User's Manual

ManualsBrandsCiholas ManualsElectronicsUWB module

Users Manual

MU202

FCC ID: 2ALIR-MU202

The MU202 is part of a wireless system that relies on ultra-wideband (UWB) pulses and

time-stamp information to determine real-time location tracking data. The MU202 transmits

UWB beacons and co-exists with other devices on a UWB network. The MU202 devices are

used in an object of interest within the operational area in order to locate and track that object.

The MU202 receives power from its host device. The MU202 module is small and versatile, and

can be utilized in a variety of hosts.

Summary of content (7 pages)

PAGE 1
Users Manual MU202 FCC ID: 2ALIR-MU202 The MU202 is part of a wireless system that relies on ultra-wideband (UWB) pulses and time-stamp information to determine real-time location tracking data. The MU202 transmits UWB beacons and co-exists with other devices on a UWB network. The MU202 devices are used in an object of interest within the operational area in order to locate and track that object. The MU202 receives power from its host device.
PAGE 2
Main System Components Micro-controller: Decawave DW1000 Ultra Wideband (UWB) IEEE802.15.4-2011 RF Transceiver: Decawave DW1000 Ultra Wideband (UWB) IEEE802.15.4-2011 Operating Voltage: 2.8 - 5.0 V (3.3V nom.) Temperature Range: -40 - 85C Mechanical Width: Depth: Height: Weight: 28.0 mm 75.5 mm 3.7 mm 6.5 g RF Characteristics UWB IEEE802.15.4-201 Data Rate: 6.
PAGE 3
United States (FCC) Regulatory Information FCC ID: 2ALIR-MU202 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 4
To fulfill FCC Certification requirements, an OEM manufacturer must comply with the following regulations: 1. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: IMPORTANT: Contains FCC ID: 2ALIR-MU202.
PAGE 5
Canada (ISED) Regulatory Information IC:26788-MU202 CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 6
This radio transmitter (IC:26788-MU202) has been approved by ISED Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (IC:26788-MU202) a été approuvé par ISED Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal.
PAGE 7
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 1 condition ci-dessus sont remplies, des essais supplémentaires sur l’émetteur ne seront pas nécessaires. Toutefois, l’intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.