WF-180 Wireless Access Point
Thank you for buying this product. The following information aims to give you general information about product introduction, product overview and installation procedure and so on. 带格式的: 缩进: 左侧: 1. Introduction WF-180 is a dual-band 2x2streams and chains indoor Wi-Fi AP, which is complied with the IEEE802.11n standard and designed for high-density deployments in offices, schools, hospitals and hotels that require premium performance.
Console port Also names as RJ-11, used to manage WF-180 software. Reset button Pressing the button longer than 5s to restore the device to factory defaults and reset the device. DC power connector used for connecting the power adapter USB port supports a USB 2.0 connector(Support up to 0.5A) Kensington Lock Slot What is the function?For additional security 4.
Installation tool: • Screws and screw-driver 带格式的: 段落间距段前: 0.5 行, 段后: 0.5 行 Installation site: Please ensure the visibility of product and no tall buildings and woods block between them. 带格式的: 段落间距段前: 0.5 行, 段后: 0.5 行 Installation procedure Wall mounting 1. Drive two screws fist in the wall. The distantbetween two screws mounted on the wall is 40mm. 带格式的: 段落间距段前: 0.5 行, 段后: 0.5 行 2.
带格式的: 段落间距段前: 0.5 行, 段后: 0.5 行 3. Align the securing slothookof AP with bracket, and push AP from up to down until it has been lockedsecured fully. 带格式的: 字体: (默认) +西文正 文, (中文) +中文正文, 五号 Ceiling mounting: 1.
2. Secure the screw to fasten bracket assembly. Bracket configures two screw holes, select one of them to fit ceiling rails. 带格式的: 列出段落, 左, 编号 + 级别: 1 + 编号样式: 1, 2, 3, … + 起始编号: 1 + 对齐方式: 左侧 + 对齐位置: 0.75 厘米 + 缩进位 置: 1.49 厘米 2. 带格式的: 列出段落, 左, 缩进: 左侧: 1.49 厘米 3. Align securingslot hook of AP with bracket (see dotted line), and then push AP close to bracket until AP has been fullyfastenedlocked.
4. Go through locking holes by cable-tie to safely content AP with bracket 5.
2.4G 2.4G Hz Radio Status Off 5G Hz radio disabled Steady – Green 2.4G Hz radio enabled in HT WLAN mode Off 2.4G Hz radio disabled 6. Software Installation Logging in to the Web Page 1. To configure PC IP address, fill 192.168.188.x in “IP address” and 255.255.255.0 in “Subnet mask”(set Window7 as an example to show the properties) 2. Input the default IP address 192.168.188.251 in the address bar of the web browser and press Enter.
Ethernet interface RJ-45 connector Electrical specification Power input +12V/1A Power consumption ≤12W Environmental specification Working temperature 0℃ ~ 45℃ Working humidity 5% ~ 95% non-condensing Elevations 86kPa~106kPa Dustproof and waterproof IP30 Lightning protection 4KV common mode surge 8.
有毒有害物质声明 Hazardous Materials Declaration 部件名称 (Parts) 有毒有害物质或元素(Hazardous Substance) 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr6+) (PBB) (PBDE) 电路模块 (circuit modules) × O O O O O 电缆及电缆组件 (Mechanicalassembli es) x O O O O O 金属部件 (Metal Parts) O O O O O O 塑料和聚合物部件 (Plastic and Polymeric Parts) O O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量在 SJ/T11363 - 2006标准规定的限量要求下。 Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below th
带格式的: 缩进: 左侧: 米, 无项目符号或编号 9. 0.74 厘 WF-180 AP has been tested and complied with the standards as follows: • • • • • • • FCC DOC Part 15 Class B (US) FCC Part 15 Subpart C 15.247 (US) FCC Part 15 Subpart E 15.407 (US) CE marked with NB letter of opinion for: ETSI EN 300 328 (2.4GHz) ETSI EN 301 893 (5GHz) CB with IEC/EN 60950-1 (Basic safety certificate for worldwide marketing) 10. FAQs FAQ Solution Check that the power adapter is plugged into a live AC outlet.
889Yichang Road Shanghai 200233, China Phone: +86 21 61921930 Fax: +86 21 6192 1929 USA Cambridge Industries Group Techmart Center 5201 Great America Parkway, Suite 320 Santa Clara CA 95054. Tel: +1 408.730.6888 13. Legal declaration CIG name, CIG logo, and all CIG product names are trademarks of Cambridge Industries Group Co. Ltd (CIG). All other brand and product names are claimed as property of others respective holders. Specifications, products, and products names are subject to change without notice.
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 带格式的: 段前分页 These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
forth for an uncontrolled environment”. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.