Please log on to www.xactcommunication.com for accessory & product information.
Contents Safety Instructions ------------------------------------------------------------------------------------------ 3 Getting Started ----------------------------------------------------------------------------------------------- 5 Desk Mounting ----------------------------------------------------------------------------------------------- 8 Wall Mounting ------------------------------------------------------------------------------------------------ 9 Cordless Telephone Operation ----------------------
Contents Editing a Name and Number in the DIRECTORY ----------------------------------------- 19 Editing the Number in the DIRECTOR Y before Dialing --------------------------------- 20 Placing Calls from the DIRECTORY --------------------------------------------------------- 21 Deleting All Records in the DIRECTORY --------------------------------------------------- 21 Selective Deleting in the DIRECTORY ------------------------------------------------------ 21 Function Operation --------------------------
Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the telephone. 3. Unplug this telephone from the wall outlet before cleaning or replacing the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the telephone. Use a damp cloth for cleaning. 4.
Safety Instructions 13. 14. 15. 16. 17. E. If the telephone has been dropped or the case has been damaged. F. If the telephone exhibits a distinct change in performance. Do not use the telephone to report a gas leak in the vicinity of the leak. Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase. 2.
Getting Started 8. Install the BATTERY PACK by plugging it into the BATTERY CONNECTOR inside the BATTERY COMPARTMENT. The HANDSET LCD Screen will display “RING: HI”. 9. Place the BATTERY PACK inside the BATTERY COMPARTMENT. 10. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed position. 11. Place one HANDSET to cradle of BASE UNIT(Do not charge the HANDSET with the KEYPAD face down), and the other one to the CHARGER UNIT. 12.
Getting Started ANTENNA Press the TALK button to confirm that you have a dial tone. If you do not get a dial tone, review steps 3 through 11. If you still do not have a dial tone, refer to the Problem Solving section on page 31. HANDSET BELT CLIP HOOK With the back of the HANDSET facing up, insert one side of the BELT CLIP HOOK into the matching slot at the top side of the HANDSET. Press down on the opposite side of the BELT CLIP until the other HOOK locks into the slot on the side of the HANDSET. 14.
Desk Mounting Desk Mounting One of the special features of your telephone is the unique design of the MOUNTING BRACKET which can hold your phone at an angle when desk mounting or wall mounting. With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET into the slots of the BASE UNIT (as shown in Figure 2). FIGURE 2 FIGURE 1 IMPORTANT: Attach the MOUNTING BRACKET when using your phone on a desk.
Wall Mounting Wall Mounting You may choose to put the BASE UNIT of your cordless telephone on a wall. 1. With the back of the BASE UNIT facing up, insert the hooks of the MOUNTING BRACKET into the matching slots on the back of the BASE UNIT (positioning the mounting bracket as shown in Figure 1.) 2. Insert the small plug on the end of the AC ADAPTER into the POWER-IN CONNECTION JACK at the back of the BASEUNIT and put the AC ADAPTER CORD inside the MOLDED WIRING CHANNEL as shown in Figure 2. 3.
Wall Mounting IMPORTANT: A “beep” will be heard when the HANDSET is properly positioned in the BASE UNIT CHARGE CRADLE and charging. Securely positioning the HANDSET in the BASE UNIT will also prevent the HANDSET from falling. IMPORTANT: The CHARGER UNIT does not have the WALL MOUNTING Feature. Place the CHARGER UNIT on a stable surface and charge the HANDSET. The POWER LED indicates the AC ADAPTER installed properly. The CHARGER LED lights up when the HANDSET is charged properly.