User Manual

ManualsBrandsCIDMATE International Technology ManualsElectronics2.4GHz ANALOG CORDLESS PHONE

Cordless Telephone Operation

Preparing for Use

Before you can use your cordless telephone, you must charge the HANDSET for 12 hours.

Failure to do so will require recharging of the BATTERY PACK more often.

1. Place the HANDSET on the BASE UNIT for 12 hours.

2. After 12 hours, remove the HANDSET from the BASE UNIT.

Before you can use your cordless telephone, you must charge the HANDSET for 12

hours. Failure to do so will require more frequent charging of the BATTERY PACK. See

page 29 for more information on the BATTERY PACK.

NOTE:

Depending on the frequency of use, once the HANDSET is fully charged, it remains functional

for approximately 4 hours of continuous use and approximately 5 days when the HANDSET

is off the BASE UNIT in STANDBY mode.

NO LINE Indicator

This telephone checks for an active TELEPHONE LINE

connection. If “NO LINE” appears on the LCD Screen,

when the HANDSET is in STANDBY mode, no calls can

be made or received from this telephone. Check that the

TELEPHONE LINE CORD plugs are connected to the

wall TELEPHONE JACK and the BASE UNIT

TELEPHONE LINE CONNECTION JACK. If “NO LINE”

continues to be displayed, check that the other phones in

the house are working. If none of the phones work,

contact your local phone company.

Receiving Calls

1. When the phone rings, lift the HANDSET and press

the button. The HANDSET LCD Screen will

display “CALLS” and “TALKING”, and the BASE

UNIT IN USE LED indicator will light up.

2. Start your conversation.

3. To end your conversation, either press the

button or place the HANDSET on the BASE UNIT. If

you place the H A N D S E T on the BASE UNIT

CHARGE CRADLE, you activate the automatic

STANDBY feature.

TALK

Summary of content (17 pages)

PAGE 1
Cordless Telephone Operation Preparing for Use Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the BATTERY PACK more often. 1. Place the HANDSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HANDSET from the BASE UNIT. Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the BATTERY PACK.
PAGE 2
Cordless Telephone Operation NOTE: 1. The Call Timer will start to count once you press the TALK button. 2. The LCD Screen emits light for 5 seconds every time you press any button on the HANDSET. 3. When “CALLS” appears on the LCD Screen, it means that the HANDSET is OFF-HOOK (connected to the telephone line). Minute CALLS Seconds 00 MIN 1SEC 14 Channel Placing Calls 1. Press the TALK button, the Call Timer starts to count.
PAGE 3
Cordless Telephone Operation Transferring Calls You can directly transfer any active call to another HANDSET. 1. HANDSET must be on an active call. EDIT 2. Press the TRANSFER button. 3. When the other HANDSET answers, the call will automatically be connected to the other HANDSET. 4. An unanswered call will ring back to the originating HANDSET if not answered within 20 seconds.
PAGE 4
Caller ID System Operation Caller ID System This telephone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 80 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. Viewing Caller Information During Incoming Calls 1.
PAGE 5
Caller ID System Operation Call Waiting When you subscribe to a Call Waiting service from your local telephone company, this telephone will display the name and number of the second caller while you are having a conversation with your first caller. 1. When you are having a conversation, this telephone e.g. will automatically display the name and number of JOHN BROWN 235-607-5512 the second caller. The name will blink. 10:00A M 8/24 2. Press the FLASH button to answer the second caller.
PAGE 6
Caller ID System Operation Viewing the Caller List 1. Press the SCROLL DOWN the SCROLL UP RIGHT button to view from the latest Caller ID record, or press button to view from the first Caller ID record, press the SHIFT button if the name has more than 11 characters. MICHAEL BROW 604-555-1212 10:00A M 8/24 NEW # BROWNING 604-555-1212 10:00A M 8/24 1 NEW # 1 2. Press the DIR button to return to STANDBY mode.
PAGE 7
Caller ID System Operation Saving the Name and Number in the Caller List into the DIRECTORY 1. Press the SCROLL UP 2. Press and hold down the or DOWN RE/PA SAVE button to find the Caller ID record. button. The LCD Screen will show “SAVED”. NOTE: It is not advisable to save a telephone number without the corresponding name. This will lead to improper display on PRIVATE and OUT OF AREA calls. Deleting All Records in the Caller List DELETE 1.
PAGE 8
Caller ID System Operation Speed Viewing the DIRECTORY 1. Press the DIR button. 2. Enter the first letter of a name. (See Page 27 for detail of entering a letter.) 3. Press the SCROLL UP button to view all names with the same first letter. Saving in the DIRECTORY 1. Press the DIR button. 2. Press the EDIT TRANSFER button. 3. Use the TELEPHONE KEYPAD ~ WXY 9 buttons to enter the name, (see page 27 for detail) you can store up to 15 characters.
PAGE 9
Caller ID System Operation Editing a Name and Number in the DIRECTORY 1. Press the DIR button. The LCD Screen will display “DIRECTORY”. 2. Press the SCROLLUP or DOWN button to find the record you want to edit. DIR MICHAEL BROW 604-555-1212 # 3. Press the character. EDIT TRANSFER 8 TOTAL 12 button to edit the name, and the cursor will blink over the first DIR MICHAEL BROW 604-555-1212 # 4.
PAGE 10
Caller ID System Operation Editing the Number in the DIRECTORY before Dialing 1. Press the DIR button. The LCD Screen will display “DIRECTORY”. 2. Press the SCROLL UP 3. Press the EDIT TRANSFER or DOWN button to find the caller. button to edit the name. 4. Press the SCROLL DOWN e.g. button. DIR MICHAEL BROW 604 555 1212 # 1 TOTAL 6 cursor is blinking 12 5. Press the SCROLL LEFT or RIGHT you want to change. To erase, press the DELETE button. SCAN To add, use the TELEPHONE KEYPAD 6.
PAGE 11
Caller ID System Operation Placing Calls from the DIRECTORY 1. Press the DIR button. The LCD Screen will display “DIRECTORY”. 2. Press the SCROLL UP or DOWN button to find the record you want to call. 3. Press and hold down the DIAL 7 the DIAL 10 DIAL1+ 1+ button for a local call, or press and hold down button for a local call with area code, or press and hold down the # button for a long distance call. 4. To end the call, either press the TALK button or place the HANDSET on the BASE UNIT.
PAGE 12
Caller ID System Operation Function Operation You can change the settings on the HANDSET through the functions menu. This unit contains the following special functions: A. B. C. D. E. LANGUAGE SILENT ON/OFF TIME SET RINGER VOLUME LCD CONTRAST F. G. H. I. J. PBX NUMBER FLASH TIME PAUSE TIME VOICE MAIL MSG WAITING FUNC To access, press the VOICE MAIL button at STANDBY mode, then press the TELEPHONE KEYPAD ~ WXY 9 button or the SCROLL UP or DOWN button.
PAGE 13
Caller ID System Operation A. Language This telephone offers English, Spanish, and French languages for your convenience. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT TRANSFER 1 button. button. 4. Press the SCROLL UP or DOWN button to select the language you desire. You can also set the language by pressing the following TELEPHONE KEYPAD buttons; 1 for English, ABC 2 for Spanish, or DEF 3 for French. English is the preset language. 5.
PAGE 14
Caller ID System Operation 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button. button to return to STANDBY mode. NOTE: The date and time will automatically set, if you have subscribed to the Caller ID service from your local telephone company. D. Ringer Volume This function enables you to adjust the ringer volume to HI, LOW, or OFF as desired. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT TRANSFER GHI 4 button. button. 4.
PAGE 15
Caller ID System Operation 4. Press the SCROLL UP or DOWN button. (OFF is the preset PBX number.) PBX MODE OFF - set for direct line access. 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button. button to go back to STANDBY mode. NOTE: When placing a call by using the DIAL 7 DIAL1+ 1+ , or the DIAL 10 , or the # button, this telephone will automatically add the PBX number and a pause time before the dialed telephone numbers. G.
PAGE 16
Caller ID System Operation I. Voice Mail This telephone enables you to store the Voice Mail Access Code number in your area. This will automatically connect you to the Voice Mail service provider with one-touch dialing. 1. Press the FUNC VOICE MAIL button. 2. Press the TELEPHONE KEYPAD 3. Press the EDIT TRANSFER WXY 9 button. button. 4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD WXY ~ 9 buttons. 5. Press and hold down the 6. Press the FUNC VOICE MAIL RE/PA SAVE button.
PAGE 17
Caller ID System Operation Telephone Keypad Characters The TELEPHONE KEYPAD ~ WXY 9 buttons are used to enter characters when entering names. Press the appropriate TELEPHONE KEYPAD button to get the following characters. KEYPAD BUTTONS CHARACTERS 1 SPACE & ’( ) * . 1 2 ABC2 3 DEF3 4 GHI4 5 JKL5 6 MNO6 7 PQRS7 8 TUV8 9 WXYZ9 * * 0 0 # # EXAMPLE: If you want to enter the characters “ACE” on the HANDSET LCD Screen. 1. Press the DIR button. The LCD Screen will display “DIRECTORY”. 2.